An All-Optical Picosecond-Pulse Packet Buffer Based on Four-Wave Mixing Loading and Intracavity Soliton Control

Sheng Wang,Yikai Su,Anjali Agarwal,Prem Kumar

DOI: https://doi.org/10.1109/cleo.2000.907508

2000-01-01

Abstract:All-optical buffering is critical for optical/photonic packet switchers or IP routers to solve contention issues and for access nodes to bridge the speed gap.

What problem does this paper attempt to address?

All-optical Storage of Picosecond Pulse Packets Using Wavelength-Induced XPM and Parametric Amplification

Agarwal, A.,Wang, L.,Su, Y.,Kumar, P.

DOI: https://doi.org/10.1109/ofc.2000.868421

2000-01-01

Abstract:We present phase-insensitive loading of external data in an all-optical storage line wherein linear loss is compensated by phase-sensitive parametric amplification. Storage is achieved for about 100 circulations within the fiber buffer.
Blocking and Delay Analysis of Single Wavelength Optical Buffer with General Packet Size Distribution

Jianming Liu,Tony Tong Lee,Xiaohong Jiang,Susumu Horiguchi

DOI: https://doi.org/10.1109/jlt.2008.2004951

IF: 4.7

2009-01-01

Journal of Lightwave Technology

Abstract:Buffers are essential components of any packet switch for resolving contentions among arriving packets. Currently, optical buffers are composed of fiber delay lines (FDL), whose blocking and delay behavior differ drastically from that of conventional RAM at least two-fold: 1) only multiples of discrete time delays can be offered to arriving packets; 2) a packet must be dropped if the maximum delay provided by optical buffer is not sufficient to avoid contention, this property is called balking. As a result, optical buffers only have finite time resolution, which may lead to excess load and prolong the packet delay. In this paper, a novel queueing model of optical buffer is proposed, and the closed-form expressions of blocking probability and mean delay are derived to explore the tradeoff between buffer performance and system parameters, such as the length of the optical buffer, the time granularity of FDLs, and to evaluate the overall impact of packet length distribution on the buffer performance.
All-Optical Queue Buffer Using Optical Threshold Functions and Wavelength Converters

Yuancheng Zhang,Hongming Zhang,Minyu Yao

DOI: https://doi.org/10.3788/col201210.030606

IF: 2.56

2012-01-01

Chinese Optics Letters

Abstract:A modular, cascadable, and self-controlled optical queue buffer is proposed, which can solve the packet contention at a 2 x 1 optical node. Controlled by incoming optical packets, the buffer can realize first-in-first-out queue buffering without the necessity of external control signals. By using optical threshold functions and wavelength converters based on semiconductor optical amplifier, the push and pop operations of packets on queue can both be achieved. In addition, preliminary experiment is carried out.
Cascaded Optical Buffer Based on Nonlinear Polarization Rotation in Semiconductor Optical Amplifiers

Cheng Mu,Wu Chong-Qing,Liu Hua

DOI: https://doi.org/10.3788/aos20082810.1898

2008-01-01

Abstract:A cascaded buffer based on nonlinear polarization rotation in semiconductor optical amplifiers is proposed, which is suitable for fast reconfiguration of buffering time at picoseconds. With the proposed buffer, sixty different buffer times are demonstrated at 2.5 Gb/s.
Optical packet switching and buffering by using all-optical signal processing methods

H. J. S. Dorren,M. T. Hill,Y. Liu,N. Calabretta,A. Srivatsa,F. M. Huijskens,H. de Waardt,G. D. Khoe

DOI: https://doi.org/10.1109/JLT.2002.803062

IF: 4.7

2003-01-01

Journal of Lightwave Technology

Abstract:We present a 1 × 2 all-optical packet switch. All the processing of the header information is carried out in the optical domain. The optical headers are recognized by employing the two-pulse correlation principle in a semiconductor laser amplifier in loop optical mirror (SLALOM) configuration. The processed header information is stored in an optical flip-flop memory that is based on a symmetric co...
Improvement of Optical Packet Switching Performance by Employing Partially Shared Buffering with Shared Wavelength Converters

X Li,JP Chen,JF Chen,T Shang,W Jiang,MH Yan

DOI: https://doi.org/10.1117/12.445087

2001-01-01

Abstract:In this paper, we propose an optical switch that combines both shared tunable wavelength converter and partially shared buffering together. The packet contention can be resolved both in the time domain (output buffering and partially shared buffering) and frequency domain (wavelength conversion) simultaneously and switching performance can be greatly improved. Various simulations are carried out to show the performance of different buffering and wavelength conversion structures. The results confirm that the switching architecture we proposed has excellent performance.
Multiple Packet Recirculation In An Optical Buffer Using A Crosspoint Switch

r geldenhuys,nan chi,zheng wang,i tafur monroy,ton koonen,h j s dorren,f w leuschner,g d khoe,shinshan yu

DOI: https://doi.org/10.1109/LEOS.2005.1547890

2005-01-01

Abstract:Multiple recirculations through an optical buffer using a fast-reconfigurable AVC based Crosspoint switch matrix is shown. A 10Gbit/s payload is used and a small power penalty for each additional recirculation is achieved.
All-Optical Switch Based on Two-Pump Four-Wave Mixing in Fibers Without A Frequency Shift

Yu Tian,Xiaosheng Xiao,Shiming Gao,Changxi Yang

DOI: https://doi.org/10.1364/ao.46.005588

IF: 1.9

2007-01-01

Applied Optics

Abstract:We report an all-optical switch based on two-pump four-wave mixing in fibers. The switched signal is not shifted in frequency in this scheme. For different signal wavelengths, the pump wavelengths and powers can be optimized to achieve the best performance. The principle of how to design the switch is discussed in detail. A high extinction ratio of -60 dB is obtained when the pump parameters are optimized by a genetic algorithm that exhibits good convergence property and high computing efficiency. The effect of zero-dispersion wavelength fluctuations along the fiber on the switch is analyzed.
High-rate Data Buffering in Silicon Nanophotonic Devices

Qiang Li

DOI: https://doi.org/10.1117/2.1200803.1075

2008-01-01

SPIE Newsroom

Abstract:Buffers represent one of the most important components in a communications router. The device must be able to store data packets for a substantial period of time and release the data within an acceptable delay when the switch is clear. Optical buffers—devices that store optically transmitted data—are considered key elements to achieve synchronized and contention-free traffic in the design of all-light-based communication networks. Conventional buffers use optical fiber delay lines, but since the delay is for a fixed amount of time, they are unable to guarantee contention-free connections in the switch or through a network. Hence, research on tunable optical delay lines is generating significant interest, especially with optical communications now gearing up for large-scale integration. Advances in silicon technology are making this material a choice candidate for future integrated photonics. On-chip delay lines based on silicon-on-insulator (SOI) photonic wire waveguides were recently demonstrated, consisting of up to 100 microring resonators cascaded in either coupled-resonator or all-pass filter (APF) configurations with error-free operation up to 5Gbps.1 This demonstration was a major milestone in the development of all-optical buffers for interconnects. Tunable delays in an SOI planar waveguide based on slow light induced by stimulated Raman scattering (SRS) have also been reported,2 as well as intensity-tunable group delays in siliconmicroresonators enhanced by SRS.3 The functional mechanism of a ring resonator-based optical delay line can be described as follows: When a probe beam is injected into a ring with a frequency matching the resonance of the ring, light is forced to circle multiple times, lengthening the delay. If beam frequency deviates from resonance, it will bypass the ring and no delay will occur. When a pump light, whose frequency is of a different resonance, is injected into the microring resonator, the absorbed energy is eventually converted to therFigure 1. (a) Scanning electron microscope image of a microring resonator and (b) its resonance spectrum.
Optical Buffer in an Asynchronous Transfer Mode Photonic Switching System

ZJ Zhang,YL Guo,HY Zhang,DJ Li,BK Zhou

DOI: https://doi.org/10.1117/1.600688

IF: 1.3

1996-01-01

Optical Engineering

Abstract:The capacity of the telecommunication networks is expected to grow to very large throughputs. It is expected that the future Broadband Integrated Services Digital Network (BISDN) large central office will need a switching capacity of the order of Tbits/s when multimedia video communications are widely deployed.
All-Optical Buffering in All-Optical Packet Switched Cross Connects

Y Liu,MT Hill,N Calabretta,H de Waardt,GD Khoe,HJS Dorren

DOI: https://doi.org/10.1109/lpt.2002.1003114

IF: 2.6

2002-01-01

IEEE Photonics Technology Letters

Abstract:We show that optical packets can be routed in an optical fiber by using an optical threshold function that controls a wavelength converter switch. The optical threshold function is made from two coupled ring lasers. Experimental evidence is given.
Modular and Intelligently Controlled Optical Buffer with Last-In-First-Out Priority

Y. Zhang,H. Zhang,M. Yao

DOI: https://doi.org/10.1049/el.2011.2301

2011-01-01

Electronics Letters

Abstract:A novel optical buffer is proposed and demonstrated experimentally. The buffer is composed of a series of buffer modules that are constructed by optical threshold functions and wavelength converters. Push and pop operations of packets of the buffer are carried out in the optical domain and intelligently controlled by the incoming packets. The buffer can be applied to avoid packet contention with priority of last-in-first-out. In the experiment, when packets with 2.5 Gbit/s data enter the buffer, packets with lower priority are circulating in the buffer until there is no contention.
Efficient Designs of Optical LIFO Buffer with Switches and Fiber Delay Lines

Xiaoliang Wang,Xiaohong Jiang,Achille Pattavina

DOI: https://doi.org/10.1109/tcomm.2011.101411.100640

IF: 6.166

2011-01-01

IEEE Transactions on Communications

Abstract:The lack of optical buffer is still one of the main problems that hinder the development of all optical networks. Current works on this topic mainly focus on the emulation of optical buffers based on a combination of fiber delay line (FDL) and switch. These works have demonstrated the feasibility of FDL-based emulation for many kinds of optical buffers, like the First In First Out (FIFO) buffer, Priority buffer, etc. The Last In First Out (LIFO) buffer is another basic network component for congestion control and QoS guarantee. Recently, Huang et al. [1] introduced a recursive construction for the LIFO buffer, which requires no less than 9 log(2) B FDLs to build such a buffer of size B. In this paper, we first show that by a proper FDL grouping and a suitable FDL length assignment for each FDL-group, we need approximately 3 log(2) B FDLs to emulate a LIFO buffer of size B. We then demonstrate that if a careful packet scheduling among FDL-groups is adopted, this number of FDLs can be further reduced to 2 log(2) B.
All-optical Loadable and Erasable Storage Buffer Based on Parametric Nonlinearity in Fiber

A Agarwal,LJ Wang,YK Su,P Kumar

DOI: https://doi.org/10.1109/jlt.2005.850025

IF: 4.7

2005-01-01

Journal of Lightwave Technology

Abstract:We present a loadable and erasable all-optical fiber storage buffer based on parametric gain and cross-phase modulation (XPM) loading. The gain is provided by a phase-sensitive amplifier (PSA), implemented as a Sagnac interferometer, and relies on the nonlinear interaction within standard dispersion-shifted fiber. PSAs inherently have the property of stabilizing ones and zeros and thus eliminate the need to use optical filters within the buffer, or the need for any other kind of intensity discriminator. The action of the PSA is then twofold. It provides the gain and also achieves bistability of the buffer, which gives it an advantage over a linear amplifier such as erbium-doped fiber amplifier for our experimental configuration. External data are written into the buffer using wavelength-induced XPM. This method is insensitive to the optical phase of the incoming data and thus does not require tracking of its phase. The buffer is erased by employing a nonlinear optical loop mirror as a switch. We demonstrate storage of picosecond pulse packets at bit rates of 1 Gb/s for periods of time up to 1 ms.
All-optical signal processing for optical packet switching networks

Y. Liu,M. T. Hill,N. Calabretta,E. Tangdiongga,R. Geldenhuys,S. Zhang,Z. Li,H. De Waardt,G. D. Khoe,H. J. S. Dorren

DOI: https://doi.org/10.1117/12.621346

IF: 1.368

2005-01-01

IEEE Transactions on Plasma Science

Abstract:We discuss how all-optical signal processing might play a role in future all-optical packet switched networks. We introduce a concept of optical packet switches that employ entirely all-optical signal processing technology. The optical packet switch is made out of three functional blocks: the optical header processing block, the optical memory block and the wavelength conversion block. The operation principle of the optical packet switch is explained. We show that these three functional blocks can be realized by using the nonlinearities of semiconductor optical amplifiers. Some technologies in these three functional blocks are described. The header processor is realized using a Terahertz Optical Asymmetric Demultiplexer. We also describe a header pre-processor to improve the extinction ratio of the header processor output. In the optical memory block, we show that an all-optical memory can be obtained by using two coupled lasers that form a master-slave configuration. The state of the optical memory is distinguished by the wavelength of the master laser. We extend the concept to an optical memory can have multiple states. In the wavelength conversion block, we demonstrate a 160 Gbit/s wavelength conversion using a single semiconductor optical amplifier in combination with a well-designed optical bandpass filter. The semiconductor optical amplifier has a gain recovery time greater than 90 ps, which corresponds to a less than 20 GHz bandwidth for conventional wavelength conversion. We show that by properly using the optical bandpass filter, ultrafast dynamics in the semiconductor optical amplifier can be employed for wavelength conversion at ultrahigh bit-rates.
Configuration Study of Optical Buffer

Jun-jie YANG,Shi-lin XIAO

DOI: https://doi.org/10.3969/j.issn.1002-5561.2005.12.015

2005-01-01

Abstract:In Optical Packet Switch, optical buffer, which consist of fiber delay lines, is an effective way to resolve optical packet contentions. In this paper, different types and configuration methods of optical buffer are discussed. Then, the research interest focuses on three kinds of configuration methods in the shared optical buffers, i.e., degenerate mode (DM), double degenerate mode (DDM), and increased degenerate mode (IDM). The performances of these three configuration methods are evaluated by simulation experiments.
All-optical switching of packets for all-optical buffering purposes

Liu, Y.,Hill, M.T.,de Waardt, H.,Dorren, H.J.S.

DOI: https://doi.org/10.1109/ECOC.2001.989642

2001-01-01

Abstract:An all-optical switching concept for all-optical buffering of packets is presented. The concept feasibility has been verified by showing experimentally that its optical threshold function (>45 dB contrast ratio) can control a wavelength converter switch.
Optical Data Buffering Based on Stimulated-Brillouin-Scattering-Induced Acoustic Storage in an As2Se3 Fiber

Zhiyao Zhang,Xiaojun Zhou,Rui Liang,Zujun Qin,Yong Liu

DOI: https://doi.org/10.1109/sopo.2009.5230052

2009-01-01

Abstract:Buffering of a 2.5 Gb/s bit stream with non-return-to-zero format is numerically demonstrated based on stimulated- Brillouin-scattering-induced acoustic storage in an As2Se3 fiber. The storage process and the retrieval process of the bit stream are separately controlled by a "write" pulse and a "read" pulse. Simulation results show that output signal-to-noise ratio of 21 dB, 18 dB, 16 dB, and readout efficiency of 71%, 47%, 31% can be achieved after 5-ns, 10-ns, 15-ns storage, respectively. The "write" and "read" pulses are chirped Gaussian ones with single pulse energy of ~0.25 muJ and spectrum-width of ~5 GHz, which are technically achievable. Buffering of a consecutive 10- bit-long 2.5 Gb/s non-return-to-zero bit stream has also been demonstrated in the As2Se3 fiber with length of 0.5 m. This buffering method can be used for all-optical buffering in optical communication systems.
All-Optical Devices for Ultrafast Packet Switching

H. J. S. Dorren,J. Herrera,O. Raz,E. Tangdiongga,Y. Liu,J. Marti,F. Ramos,G. Maxwell,A. Poustie,H. C. H. Mulvad,M. T. Hill,H. de Waardt,A. M. J. Koonen,G. D. Khoe

DOI: https://doi.org/10.1109/leos.2007.4382614

2007-01-01

SPIE Newsroom

Abstract:We present some progress in the field of optical signal processing that could be; utilized in all-optical packet switching. We demonstrate error-free 160 Gb/s optical wavelength conversion employing a single semiconductor optical amplifier. The gain recovery time of the semiconductor optical amplifier is greater than 90 ps. Assisted by an optical bandpass filter, an effective recovery time of 3 ps is achieved in the wavelength converter, which ensures 160 Gb/s operation. This optical wavelength converter can be controlled by a monolithically integrated optical flip-flop memory to route 80 Gb/s data-packets all-optically. The routing is realized without electronic control. The integrated optical flip-flop is based on two-coupled lasers, exhibits single-mode operation, has 35 dB contrast ratio between the states and switches state in about 2 ns. We demonstrate that the integrated flip-flop is able to control the optical wavelength converter up to 160 Gb/s. The system is capable of routing 80 Gb/s data packets with duration of 35 ns, separated by 15 ns of guard time.
Output-Aware Buffering with Variable Delay Buffers in Optical Packet Switching Networks

Ming Xin,Minghua Chen,Hongwei Chen,Shizhong Xie

DOI: https://doi.org/10.1109/OFC.2007.4348367

2007-01-01

Abstract:A new buffer structure with output-aware buffering and variable delay buffer is proposed. This structure can realize optical RAM buffering in OPS contention resolution, so that it can significantly improve the performance of OPS networks.

An All-Optical Picosecond-Pulse Packet Buffer Based on Four-Wave Mixing Loading and Intracavity Soliton Control

All-optical Storage of Picosecond Pulse Packets Using Wavelength-Induced XPM and Parametric Amplification

Blocking and Delay Analysis of Single Wavelength Optical Buffer with General Packet Size Distribution

All-Optical Queue Buffer Using Optical Threshold Functions and Wavelength Converters

Cascaded Optical Buffer Based on Nonlinear Polarization Rotation in Semiconductor Optical Amplifiers

Optical packet switching and buffering by using all-optical signal processing methods

Improvement of Optical Packet Switching Performance by Employing Partially Shared Buffering with Shared Wavelength Converters

Multiple Packet Recirculation In An Optical Buffer Using A Crosspoint Switch

All-Optical Switch Based on Two-Pump Four-Wave Mixing in Fibers Without A Frequency Shift

High-rate Data Buffering in Silicon Nanophotonic Devices

Optical Buffer in an Asynchronous Transfer Mode Photonic Switching System

All-Optical Buffering in All-Optical Packet Switched Cross Connects

Modular and Intelligently Controlled Optical Buffer with Last-In-First-Out Priority

Efficient Designs of Optical LIFO Buffer with Switches and Fiber Delay Lines

All-optical Loadable and Erasable Storage Buffer Based on Parametric Nonlinearity in Fiber

All-optical signal processing for optical packet switching networks

Configuration Study of Optical Buffer

All-optical switching of packets for all-optical buffering purposes

Optical Data Buffering Based on Stimulated-Brillouin-Scattering-Induced Acoustic Storage in an As2Se3 Fiber

All-Optical Devices for Ultrafast Packet Switching

Output-Aware Buffering with Variable Delay Buffers in Optical Packet Switching Networks