Converting Benzene into Γ-Graphyne and Its Enhanced Electrochemical Oxygen Evolution Performance

Chengli He,Chaofan Yang,Lulu Wu,Hui Wang,Xiaoli Cui

DOI: https://doi.org/10.1039/c8ta10317h

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:2D γ-graphyne is mechanosynthesized by using benzene and its effective oxygen evolution reaction performance is demonstrated.

What problem does this paper attempt to address?

Correction: Converting Benzene into Γ-Graphyne and Its Enhanced Electrochemical Oxygen Evolution Performance

Qiaodan Li,Chaofan Yang,Lulu Wu,Hui Wang,Xiaoli Cui

DOI: https://doi.org/10.1039/d3ta90075d

IF: 11.9

2023-01-01

Journal of Materials Chemistry A

Abstract:Correction for ‘Converting benzene into γ-graphyne and its enhanced electrochemical oxygen evolution performance’ by Qiaodan Li et al., J. Mater. Chem. A, 2019, 7, 5981–5990, https://doi.org/10.1039/C8TA10317H.
Lithium‐Ion Batteries: Mechanochemical Synthesis of Γ‐graphyne with Enhanced Lithium Storage Performance (small 8/2019)

Chaofan Yang,Yong Li,Yang Chen,Qiaodan Li,Lulu Wu,Xiaoli Cui

DOI: https://doi.org/10.1002/smll.201970044

IF: 13.3

2019-01-01

Small

Abstract:γ-Graphyne is a nanostructured carbon allotrope with unique large conjugate rings that are composed by sp and sp2 hybridized carbon atoms. In article number 1804710, Xiaoli Cui and co-workers synthesize γ-graphyne via a facile mechanochemical approach and demonstrate its excellent reversible Li+ storage performance experimentally.
Synthesis of γ-graphyne by mechanochemistry and its electronic structure

Qiaodan Li,Yong Li,Yang Chen,Lulu Wu,Chaofan Yang,Xiaoli Cui

DOI: https://doi.org/10.1016/j.carbon.2018.04.081

IF: 10.9

2018-01-01

Carbon

Abstract:As a new member of the carbon family, γ-graphyne has the advantages of high carriers mobility and semiconductor characteristic. In this work, a simple and high-yield route is proposed to synthesize monocrystalline γ-graphyne by mechanochemistry. Energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, transmission electron microscopy and corresponding selected area electron diffraction were performed to confirm the features of γ-graphyne in terms of composition, morphology and lattice constant. The as-prepared γ-graphyne, which is composed of sp2-hybridized and sp-hybridized carbon, is a monocrystalline with a lattice constant of 0.69 nm. UV–vis diffused reflectance spectroscopy was measured for the resultant sample and its band gap energy is estimated to be 2.58 eV from the absorption edge. The sample exhibited p-type behavior which was confirmed by the negative slope in Mott-Schottky plots and the linear sweep voltammograms under light irradiation. The valence and conduction band positions are around +2.53 and −0.05 V (vs normal hydrogen electrode) respectively, calculating from the flat band potential and its band gap energy. This work provides a novel strategy for the synthesis of γ-graphyne from readily available precursors and presents many experimental parameters of γ-graphyne.
Synthesis of Hydrogen Substituted Graphyne through Mechanochemistry and Its Electrocatalytic Properties

Jordan Lee,Yong Li,Jianing Tang,Xiaoli Cui

DOI: https://doi.org/10.3866/PKU.WHXB201802262

2018-01-01

Acta Physico-Chimica Sinica

Abstract:Since the successful synthesis of graphdiyne, graphynes have emerged as an active field in carbon materials research. Hydrogen-substituted graphyne, structurally similar to graphynes, is a kind of two-dimensional (2D) carbon-rich material composed of sp(2)-hybridized carbon and hydrogen from phenyl groups and sp-hybridized carbon from ethynyl linkages. The large pore size in the molecular structure of hydrogen-substituted graphyne aids the diffusion of ions and molecules. In this work, hydrogen-substituted graphyne was synthesized by a facile mechanochemical route. Calcium carbide (CaC2) was employed as the precursor of sp-hybridized carbon and 1,3,5 tribromobenzene (PhBr3) as that of sp(2)-hybridized carbon and hydrogen. Hydrogen-substituted graphyne was directly obtained via the cross-coupling reaction performed by ball milling under vacuum and the impurities were removed by dilute nitric acid and benzene. Mechanochemistry is a mature technology for the simple and high-yield synthesis of nanostructured materials. The composition of the as-prepared hydrogen-substituted graphyne was confirmed by Raman and H-1 solid-state nuclear magnetic spectroscopies. Energy-dispersive X-ray (EDX) spectrum and X-ray diffraction (XRD) patterns indicated that the purity and crystallinity of the prepared samples are high, which was further confirmed by the corresponding selected area electron diffraction (SAED) patterns. Transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM) images illustrated that samples had nanosheet structure with a layer-to-layer distance of 0.35 nm. However, owing to the lack of a substrate, the nanosheets reunite to form irregular microparticles, as shown in the scanning electron microscopy (SEM) images. Twin structure was found in the as-prepared samples, which might be relevant to the mechanochemical process. The samples were used to prepare electrodes for the photoelectrochemical and electrochemical catalytic analysis. The open circuit potential under chopped irradiation of the electrode showed that the as-prepared hydrogen-substituted graphyne was a p-type semiconductor. The band gap was calculated to be 2.30 eV by UV-Vis diffused reflectance (UV-Vis DRS) spectroscopy. The electrocatalytic properties of the sample were determined using a three-electrode cell in a neutral solution (Na2SO4, 0.5 mol center dot L-1 ). The onset overpotential for hydrogen evolution was -0.17 V; however, the Tafel slope was too large (1088.4 mV.dec(-1) ), which restricted application in electrocatalytic hydrogen evolution. On the other hand, the overpotential for oxygen evolution reaction was only 0.04 V and the Tafel slope was 70.0 mV.dec(-1) , making applications in electrocatalytic oxygen evolution and photocatalysis possible. This strategy opens a new avenue for preparing graphyne with good electrochemical properties using readily available precursors under mild conditions.
Graphite carbon nitride doped with a benzene ring for enhanced photocatalytic H 2 evolution

Hai Yang Yuan,Jing Yang Bai,Beibei Xu,Xin Yan Li,Shi Yang Xiao,Peng Fei Liu,Xue Lu Wang,Hua Gui Yang

DOI: https://doi.org/10.1039/d0cc08345c

IF: 4.9

2021-01-01

Chemical Communications

Abstract:g-C 3 N 4 doped with a benzene ring was synthesized by one-step polycondensation, exhibiting accelerated charge separation and transfer abilities.

chemistry, multidisciplinary
A metal-free graphdiyne material for highly efficient oxidation of benzene to phenol

Huidi Yu,Lan Hui,Yan Fang,Yurui Xue,Feng He,Yuliang Li

DOI: https://doi.org/10.1088/2053-1583/ac152f

IF: 6.861

2021-08-11

2D Materials

Abstract:Abstract Synthesizing active and durable catalysts for oxidizing benzene to phenol through benzene oxidation reaction (BOR) is of great significance for the next-generation phenol industry. The appearance of graphdiyne (GDY) brings us a very excited discovery that we can systematically study on theoretically and experimentally the exact location of active sites and reaction mechanisms of BOR using GDY as the model system. The results give us a clear understanding on the active sites responsible for BOR and sp-hybridized acetylenic bonds in GDY guarantees the activation of benzene molecule by forming new type of ‘–COO/–COOH’ active centers and efficient O transport of BOR kinetics, leading to efficient catalytic performances. The catalytic mechanism and process of GDY are clear and are the first class of metal-free catalysts capable of directly oxidizing benzene to phenol at ambient pressure and room temperature. The catalyst exhibits excellent catalytic activity with the average value of selectivity to be 82.29 ± 2.69% and the conversion to be 8.30 ± 0.66% at low temperature, superior to reported carbon materials.

materials science, multidisciplinary
Direct Catalytic Oxidation of Benzene to Phenol over Metal-Free Graphene-Based Catalyst

Jing-He Yang,Geng Sun,Yongjun Gao,Huabo Zhao,Pei Tang,Juan Tan,An-Hui Lu,Ding Ma

DOI: https://doi.org/10.1039/c3ee23623d

IF: 32.5

2013-01-01

Energy & Environmental Science

Abstract:We report an efficient, highly selective, and low temperature graphene-catalyzed reaction process for one-step oxidation of benzene to phenol with hydrogen peroxide as the oxidant. The chemically converted graphene (CCG) from small graphite was used as the catalyst. The conversion of benzene reaches 18%, with phenol being the sole product. The catalyst was reusable and very stable. By XPS, C K-edge X-ray absorption spectra, benzene-TPD, and kinetic measurements, it was concluded that the moderate H2O2 activation rate, good benzene adsorption ability, and balanced kinetic control over the oxidation reaction are responsible for the outstanding catalytic performance of the metal-free catalyst.
The preparation and use of γ-graphdiyne, a superb new photoelectrocatalyst

Ting Sun,Feng-yu Gao,Xiao-long Tang,Hong-hong Yi,Qing-jun Yu,Shun-zheng Zhao,Xi-zhou Xie

DOI: https://doi.org/10.1016/s1872-5805(21)60021-5

IF: 5.7

2021-04-01

New Carbon Materials

Abstract:Photoelectrocatalysis is a sustainable process that plays a central role in clean energy production and pollution removal. Due to the constraints of current photoelectrocatalysts such as instability and scarcity, scientists have resorted to carbon nanomaterials that are more stable and abundant. It has been found that γ-graphdiyne (GDY), the most stable carbon phase among graphynes that contains a diacetylene bond, has some striking properties such as well-ordered pores, non-uniform electronic structure, easily tunable bandgap and excellent photoelectric performance. It has become a new “star” as a highly active photoelectrocatalyst. Its properties, synthesis strategies and photoelectrocatalytic applications are reviewed. Five reaction systems are summarized based on the phase state of the precursors and catalysts, which include liquid-solid, liquid-liquid, gas-liquid, gas-solid, and solid-gas systems. The roles GDY play in photoelectrocatalysis itself, or as a support for single atom catalytic species are discussed. Problems for current research work are discussed and future research trends are proposed.

materials science, multidisciplinary
Free-radical-promoted conversion of graphite oxide into chemically modified graphene.

Na-Na Chai,Jing Zeng,Kai-Ge Zhou,Yu-Long Xie,Hang-Xing Wang,Hao-Li Zhang,Chen Xu,Ji-Xin Zhu,Qing-Yu Yan

DOI: https://doi.org/10.1002/chem.201203819

2013-01-01

Chemistry - A European Journal

Abstract:The preparation of chemically modified graphene (CMG) generally involves the reduction of graphite oxide (GO) by using various reducing reagents. Herein, we report a free-radical-promoted synthesis of CMG, which does not require any conventional reductant. We demonstrated that the phenyl free radical can efficiently promote the conversion of GO into CMG under mild conditions and produces phenyl-functionalized CMG. This pseudo-"reduction" process is attributed to a free-radical-mediated elimination of the surface-attached oxygen-containing functionalities. This work illustrates a new strategy for preparing CMG that is alternative to the conventional means of chemical reduction. Furthermore, the phenyl-functionalized graphene shows an excellent performance as an electrode material for lithium-battery applications.
Synthesis of Γ-Graphyne by Modified Mechanochemistry with Enhanced Adsorption of Organic Dyes

Jin Yang,Zhisong Bi,Siyu Zhang,Liru Zeng,Yanni Zhang,Yingnan Wang,Junfeng Yan,Wu Zhao,Yang Dai,Jiangni Yun

DOI: https://doi.org/10.1016/j.diamond.2022.109336

IF: 3.806

2022-01-01

Diamond and Related Materials

Abstract:The gamma-graphyne is a new two-dimensional carbon nanomaterials with unique sp and sp(2) hybridized carbon atoms, uniform distribution of nanotopological pores, and high degree of pi-conjugation, making it a promising candi-date in water pollutant treatment. Herein, gamma-graphyne was synthesized by a modified mechanochemical method and used as adsorbents for removing of organic dyes. Raman spectra, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are performed to confirm the chemical structure and morphology of gamma-graphyne. The maximum adsorption capacities of gamma-graphyne for rhodamine B (RhB), methylene blue (MB) and congo red (CR) obtained through kinetic and isotherm analysis are 386.10, 357.14 and 254.45 mg/g, respectively, which are in good accordance with the experimental results of 383.64, 359.72 and 242.44 mg/g. The calculated adsorption energies of-20.0995,-12.5219 and-8.3647 kCal/mol, respectively, for RhB, MB and CR, which characterized the possible adsorption sites, give more deep understanding of the experimental results regarding the remarkable absorbability of gamma-graphyne. Our work sheds light on synthesis of gamma-graphyne for the future development of excellent adsorbents.
Preparation of Copper-Embedded Graphene Nanocomposites for Catalytic Hydroxylation of Benzene to Phenol

Huiping Bi,Guangyu He,Ran Xu,Zhiqi Song,Junwu Zhu,Haiqun Chen,Xin Wang

DOI: https://doi.org/10.2174/138527281824150119100028

2015-01-01

Current Organic Chemistry

Abstract:The design and synthesis of graphene-based nanocomposites have drawn enormous attention in recent years owing to their unique structural properties. Here, we describe a simple hydrothermal procedure to fabricate Cu-graphene nanocomposites as a catalyst for direct hydroxylating benzene to phenol in the presence of hydrogen peroxide. The nanocomposites present high catalytic activity and short reaction time, attributing to the uniform diameters of the Cu nanoparticles and their homogeneous distribution on surfaces of graphene sheets. The effects of graphene content, molar ratio of H2O2 to benzene, and reaction temperature on the catalytic performance of the prepared Cu-graphene were studied. Notably, the Cu-graphene nanocomposites can contribute a conversion rate of 13.8 % and a phenol selectivity of 92.9 %. In particular, the reaction time was greatly shortened to 0.2 h, which is pretty faster than other reported Cu-based catalysts, indicating the promising application of Cu-graphene nanocomposites in the hydroxylation of benzene.
Facile and Direct Hydroxylation of Benzene to Phenol over Graphene‐Based Catalysts: Integrated Utilization of Greenhouse Nitrous Oxide

Chang Zhu,Jiena Yun,Qian Wang,Qiaoli Hu,Gang Yang

DOI: https://doi.org/10.1002/adts.201800005

2018-01-01

Advanced Theory and Simulations

Abstract:Graphene catalysis has recently emerged as a focus and herein a novel and highly efficient process is computationally designed using graphene-based catalysts that integrates the utilization of greenhouse nitrous oxide (N2O) as oxidant. The ground-state pristine graphene is not catalytically active for benzene hydroxylation, and doping and photocatalysis through excitations are employed to improve the catalyst systems, while both strategies exhibit limited effects. A combination of Be-doping and photocatalysis through excitations results in encouraging changes, where all energy barriers are moderate, so that the whole catalytic processes proceed facilely at mild conditions. Graphene materials, especially Be- and O-doped ones, are good photocatalysts due to the low excitation energies. Mechanistic studies indicate that the active sites of the excited-state graphene, whether pristine or doped, are oxygen anion radical (O center dot-) and distinct from the epoxide species for the ground state; in addition, Be-doping pronouncedly reduces the excitation energies and enhances the interactions with the active-site O species, which further show strong stabilization effects to transition states and reduce substantially the energy barriers.
Heterogeneous Liquid Phase Oxidation of Ethylbenzene to Acetophenone with Graphene Carbon-Based Catalyst

Qian Sun,Xueying Song,Li Gao,Wei Chen,Yamin Li,Liqun Mao,Jing-He Yang

DOI: https://doi.org/10.1007/s11696-018-0432-8

IF: 2.146

2018-01-01

Chemical Papers

Abstract:The series of graphene materials and N-doped graphene materials were successfully synthesized and improved by high-temperature treatment with trace iron oxide. XRD, Raman, FT-IR, TEM and XPS were employed for these catalysts. The catalytic performance of these catalysts was investigated in the selective oxidation of ethylbenzene with tert-butyl hydroperoxide as oxidant. The impacts of temperature, mass of catalysts, reaction time and oxidants on the selective oxidation of ethylbenzene were also investigated. The N-doped graphene materials exhibit greatly remarkable catalytic performance than others. The conversion of ethylbenzene is more than 90% and the selectivity of acetophenone is more than 95% at 353 K. Graphene can be used as catalyst owing to its unique structures and chemical properties. The characterization tests show that the doping of N atoms can create more defects and more active sites in the N-doped graphene materials which could greatly improve the catalytic performance. Furthermore, such cost-effective graphene-based catalysts possess good stability and could be reused at least five times without remarkable loss of the catalytic activity.
Mechanochemical Synthesis of γ-Graphyne with Enhanced Lithium Storage Performance

Chaofan Yang,Yong Li,Yang Chen,Qiaodan Li,Lulu Wu,Xiaoli Cui

DOI: https://doi.org/10.1002/smll.201804710

IF: 13.3

Small

Abstract:γ-Graphyne is a new nanostructured carbon material with large theoretical Li+ storage due to its unique large conjugate rings, which makes it a potential anode for high-capacity lithium-ion batteries (LIBs). In this work, γ-graphyne-based high-capacity LIBs are demonstrated experimentally. γ-Graphyne is synthesized through mechanochemical and calcination processes by using CaC2 and C6 Br6 . Brunauer-Emmett-Teller, atomic force microscopy, X-ray photoelectron spectroscopy, solid-state 13 C NMR and Raman spectra are conducted to confirm its morphology and chemical structure. The sample presents 2D mesoporous structure and is exactly composed of sp and sp2 -hybridized carbon atoms as the γ-graphyne structure. The electrode shows high Li+ storage (1104.5 mAh g-1 at 100 mA g-1 ) and rate capability (435.1 mAh g-1 at 5 A g-1 ). The capacity retention can be up to 948.6 (200 mA g-1 for 350 cycles) and 730.4 mAh g-1 (1 A g-1 for 600 cycles), respectively. These excellent electrochemical performances are ascribed to the mesoporous architecture, large conjugate rings, enlarged interplanar distance, and high structural integrity for fast Li+ diffusion and improved cycling stability in γ-graphyne. This work provides an environmentally benign and cost-effective mechanochemical method to synthesize γ-graphyne and demonstrates its superior Li+ storage experimentally.
Biomass Derived Graphene-Like Carbons for Electrocatalytic Oxygen Reduction Reaction

Baobing Huang,Miao Xia,Jiugen Qiu,Zailai Xie

DOI: https://doi.org/10.1002/cnma.201900009

IF: 3.82

2019-01-01

ChemNanoMat

Abstract:Two-dimensional carbons synthesis through sustainable bio-manufacturing methods has attracted much attention in the past decade. This process facilitates low cost and facile manufacturing of porous carbon materials with specific characteristics, as well as chemical functions that differ from their bulk counterparts due to the low dimensionality. Herein, a unique graphene-like carbon framework composed of three-dimensionally interconnected nanosheets has been successfully fabricated via carbonization of a biomass precursor guanine and colloidal silica. The obtained two-dimensional carbon materials, consisting of carbon nanosheets with varying sizes, can provide huge exposed areas. Owing to the merits of insitu nitrogen-doping, particularly the optimization of nitrogen species and significant improvement in porosity, the sample GHS-1000-2.5 delivers the outstanding electrochemical activity towards oxygen reduction reaction in both acid and alkaline conditions, which are comparable to the commercial Pt/C catalyst and show even better performance under the same conditions. This highly efficient, facile and low-cost strategy is expected to meet the requirements for the commercialization for fuel cells.
Graphyne as a promising metal-free electrocatalyst for oxygen reduction reactions in acidic fuel cells: A DFT study

Ping Wu,Pan Du,Hui Zhang,Chenxin Cai

DOI: https://doi.org/10.1021/jp3074305

2012-01-01

Abstract:Graphyne, a new two-dimensional periodic carbon allotrope with a one-atom-thick sheet of carbon built from triple- and double-bonded units of two sp- and sp(2)-hybridized carbon atoms, has been shown in recent studies to have the potential for high-density hydrogen and lithium storage. We report here a density functional theory (DFT) study of an oxygen reduction reaction (ORR) involving graphyne and demonstrate that graphyne is a good, metal-free electrocatalyst for ORRs in acidic fuel cells. We optimized the geometrical structure, calculated the charge densities on each carbon atom in the graphyne, and simulated each step of the ORR reaction involving graphyne. The simulation results indicate that the distribution of the charge density at each carbon atom on the graphyne plane is not uniform and that a large number of positively charged carbon atoms, which are beneficial to the adsorption of O-2 and OOH+ molecules, can behave as catalytic sites to facilitate ORRs. When H is introduced into the system, a series of reactions can occur including the formation of an O-C chemical bond between oxygen and graphyne, breakage of the O-O bond, and the creation of water molecules. The results also indicate a decrease in the energy of the system and a positive value of the reversible potential for each reaction step on the graphyne surface. In addition, a spontaneous electron transformation process occurs during the ORR along a four-electron pathway. The results presented here should lead to an improvement in the catalytic efficiency of carbon nanomaterials and provide a theoretical framework for the analysis of their catalytic activity. This paper highlights the urgent need for new experimental syntheses for graphyne.
Synthesis of Graphdiyne on a Copper Substrateviaa Self-Coupling Reaction

Jiasheng Wu,Jie Liu,Jizhe Liang,Yijie Zhang,Xiaoli Zhao,Chunxue Yuan

DOI: https://doi.org/10.1039/d2cp04384j

IF: 3.3

2023-01-01

Physical Chemistry Chemical Physics

Abstract:A new strategy is proposed to prepare graphdiyne via the self-coupling reaction of hexakis(bromoethynyl)benzene (hBEP) with alkynyl bromide groups. Prominently, the reaction can proceed moderately in 12 h at room temperature. The as-synthesized film displays a porous structure, excellent chemical characteristics, and an admirable catalytic performance for the hydrogen/oxygen evolution reaction (HER/OER).
Tailoring Collaborative N–O Functionalities of Graphene Oxide for Enhanced Selective Oxidation of Benzyl Alcohol

Jiaquan Li,Fuping Li,Qi Yang,Shaobin Wang,Hongqi Sun,Qingning Yang,Junwang Tang,Shaomin Liu

DOI: https://doi.org/10.1016/j.carbon.2021.06.062

IF: 10.9

2021-01-01

Carbon

Abstract:Benzaldehyde (BzH) is an important chemical for industrial feedstock. However, the conventional production processes heavily rely on precious metal catalysts and bring about unavoidable pollution issues. Here we report a new catalytic process to use N-doped graphene oxide (NGO) as the catalyst for oxidation of benzyl alcohol (BzOH) into BzH by an environmentally benign oxidant, peroxymonosulfate (PMS). Different approaches are developed to synthesize carbonylated NGO, which shows higher catalytic efficiency than C=O-deficient NGO. The optimized catalyst could achieve 96% BzOH conversion and unprecedented 82% BzH yield under mild temperature (50 degrees C), superior to some precious metal catalysts reported. Experimental studies unveil the indispensable roles of pyridinic N and ketonic C=O groups in forming an electron bridge between BzOH and PMS for non-radical oxidation, or separately inducing radical oxidation. The non-radical oxidation process is more selective in yielding BzH. Furthermore, the yielded BzH is free from over-oxidation into benzoic acid under various reaction conditions, because the radicals preferentially react with BzOH other than BzH and the BzH can hardly adsorb on graphene sheets, thus inhibiting its further oxidation. This work provides a cheap material and mechanic understanding of carbocatalysis for green organic synthesis with environmental and economic perspectives. (C) 2021 Elsevier Ltd. All rights reserved.
A Facile Liquid/liquid Interface Method to Synthesize Graphyne Analogs

Yuwei Song,Xiaodong Li,Ze Yang,Jing Wang,Chunyue Liu,Chipeng Xie,Huanlei Wang,Changshui Huang

DOI: https://doi.org/10.1039/c9cc02786f

IF: 4.9

2019-01-01

Chemical Communications

Abstract:An innovative facile interfacial synthetic strategy is demonstrated as a general method for the synthesis of graphyne analogs (GYs), which are composed of benzene rings connected by acetylenic bonds. All these synthesized GYs, which are obtained as uniform films in microscopic morphology, exhibit outstanding conductive properties, endowing excellent applications in many electrical devices.
Synthesis of -Graphyne and Its Applications in the Fields of Energy Storage and Conversion

Hao Zi-Xiang,Chen Yang,Wang Lin-Rui,Cui Xiao-Li

DOI: https://doi.org/10.11862/CJIC.2022.254

2022-01-01

Chinese journal of inorganic chemistry

Abstract:Alkyne carbon material is a novel two-dimensional carbon allotrope with good electrical conductivity and high specific surface area. The porous structure composed of sp2- and sp-hybridized carbon promotes charge transfer and ion transport, which endows alkyne carbon material with broad application prospects in the field of energy storage and conversion. Theoretically, gamma-graphyne (gamma-GY) has the highest stability among the gamma-GY-like carbon materials due to its stable conjugated system and unique triangular pore structure, which promotes the ionic intercalation/ de-intercalation process in alkali metal ion batteries. Given its excellent semiconductor properties, gamma-GY is also an ideal candidate for photoelectrochemical and photocatalytic oxygen evolution and hydrogen evolution. Besides, the molecular framework and electron configuration of gamma-GY can be regulated by heteroatom doping or rational molecular structural design of organic precursors. This review summarized synthesis methods of.-GY and its applications in lithium ( sodium and potassium) ion batteries, electrocatalysis, and photocatalysis, then further proposed the challenges and opportunities in the energy field.

Converting Benzene into Γ-Graphyne and Its Enhanced Electrochemical Oxygen Evolution Performance

Correction: Converting Benzene into Γ-Graphyne and Its Enhanced Electrochemical Oxygen Evolution Performance

Lithium‐Ion Batteries: Mechanochemical Synthesis of Γ‐graphyne with Enhanced Lithium Storage Performance (small 8/2019)

Synthesis of γ-graphyne by mechanochemistry and its electronic structure

Synthesis of Hydrogen Substituted Graphyne through Mechanochemistry and Its Electrocatalytic Properties

Graphite carbon nitride doped with a benzene ring for enhanced photocatalytic H 2 evolution

A metal-free graphdiyne material for highly efficient oxidation of benzene to phenol

Direct Catalytic Oxidation of Benzene to Phenol over Metal-Free Graphene-Based Catalyst

The preparation and use of γ-graphdiyne, a superb new photoelectrocatalyst

Free-radical-promoted conversion of graphite oxide into chemically modified graphene.

Synthesis of Γ-Graphyne by Modified Mechanochemistry with Enhanced Adsorption of Organic Dyes

Preparation of Copper-Embedded Graphene Nanocomposites for Catalytic Hydroxylation of Benzene to Phenol

Facile and Direct Hydroxylation of Benzene to Phenol over Graphene‐Based Catalysts: Integrated Utilization of Greenhouse Nitrous Oxide

Heterogeneous Liquid Phase Oxidation of Ethylbenzene to Acetophenone with Graphene Carbon-Based Catalyst

Mechanochemical Synthesis of γ-Graphyne with Enhanced Lithium Storage Performance

Biomass Derived Graphene-Like Carbons for Electrocatalytic Oxygen Reduction Reaction

Graphyne as a promising metal-free electrocatalyst for oxygen reduction reactions in acidic fuel cells: A DFT study

Synthesis of Graphdiyne on a Copper Substrateviaa Self-Coupling Reaction

Tailoring Collaborative N–O Functionalities of Graphene Oxide for Enhanced Selective Oxidation of Benzyl Alcohol

A Facile Liquid/liquid Interface Method to Synthesize Graphyne Analogs

Synthesis of -Graphyne and Its Applications in the Fields of Energy Storage and Conversion