Abstract:A large amount of industrial solid waste (including waste plastics, textiles, wood, etc., which are byproducts of industrial production) urgently needs to be treated. Incineration is undoubtedly the most efficient and convenient method. The existing municipal solid waste incineration plants can be transformed to burn such industrial wastes. However, the potential risks associated with high levels of heavy metals in industrial waste and the air pollution caused by co-incineration pose significant challenges to the co-incineration disposal of industrial solid waste. The change of physical and chemical properties of municipal solid waste and the emission characteristics of flue gas pollutants after co-incineration of industrial waste were studied by means of material flow simulation and experiment. In addition, experiments were designed to study the effects of temperature, calcium sulfur ratio and chlorine content on heavy metal emission during the incineration of industrial waste. The results showed that co-incineration of a certain proportion of industrial waste significantly increased the calorific value of municipal solid waste, but excessive mixing of plastic and paper industrial waste would increase the ash content. Co-incineration of plastic industrial waste can significantly increase HCl, and with the increase of temperature, the transformation of Cl to HCl is more thorough. The increase of temperature can promote the migration of Cr, Pb and Se elements to the gas phase. When Cr, Pb, and Se elements are present in the gas phase, they can combine with other gases and aerosols to form particulate matter and toxic substances, causing air pollution. When Ca/S is 1, Ba, Mn, Ni, Zn can effectively reduce the retention rate of elements in the ash. Under certain conditions, chlorine in industrial waste plastics will react with Zn to form tiny particles and low boiling point chlorides, which will increase its volatility. The mineral components in the ash can also be used for making ceramsite and building materials. These results will provide reference for the pollutants controlling during co-incineration of industrial waste and municipal solid waste process.

Emission Control of Pollutants in Waste Incineration Power Generation Process

Problems and Challenges of Municipal Solid Waste Incineration in China

Prevention and Controlling of Pollutants from Incineration of Municipal Solid Waste

Pollution Control Technologies of Dioxins in Municipal Solid Waste Incinerator

Pollutant Emission and Toxicity from MSW Incineration

Study on the relationship between waste classification, combustion condition and dioxin emission from waste incineration

Treatment Technology of Flue Gas Pollution in Domestic Waste Incineration Power Plant

Research Progress of NO_x Emission Control in Waste Incineration

Energy Recycling in Municipal Refuse and Its Pollution Control in Combustion

CONTROL TECHNOLOGY OF DIOXINS POLLUTION IN WASTE INCINERATOR

Assessing the Environmental Impact of Municipal Waste on Energy Incineration Technology for Power Generation Using Life Cycle Assessment Methodology

The impact of pollutant emissions from co-incineration of industrial waste in municipal solid waste incinerators

Summary of Flue Gas Purification and Treatment Technology for Domestic Waste Incineration

The Experiment Research On Original Pollutant Emission From Grate And Fluidized Bed Incinerator Fired Msw

Curbing dioxin emissions from municipal solid waste incineration in China: re-thinking about management policies and practices.

Dioxins Formation and Control Measures in MSW Incinerator

Purification System of Domestic Waste Incineration Flue Gas

Transfer Characteristic and Control of Heavy Metals in MSW Incineration

Formation, Measurement, and Control of Dioxins from the Incineration of Municipal Solid Wastes: Recent Advances and Perspectives

Municipal Solid Waste Incineration in China and the Issue of Acidification: A Review

Discussion on waste incineration power generation and its process calculation