Abstract:A novel highly linear magnetless isolator based on weakly coupled nonreciprocal metamaterials is proposed in this article. Nonreciprocal devices, such as isolators and circulators, are widely used in modern microwave, optics. Nowadays, nonreciprocity is exclusively achieved with anisotropic magneto-optic material. Unfortunately, this material needs permanent magnetic bias and is typically bulky, which remains incompatible with technology for integrated circuit. In this article, we reveal that strong isolation can be achieved even under the weak coupling between the transmission line and magnetless nonreciprocal metamaterials (MNMs). Compared with previous magnetless nonreciprocal approaches, in this article, as the wave propagates from port 2 to port 1, the interaction between the incoming wave and nonlinear devices can be neglected due to the weak coupling, yielding low loss (|S <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">12</sub> | = −1.03dB) and high linearity <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$({P}_{{1dB}}{>{17} {dBm}}$ </tex-math></inline-formula> , <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${{OIP}}_{{3}}{=33.5 {dBm})}$ </tex-math></inline-formula> . As the wave propagates from port 2 to port 1, 36.2 – dB isolation can be achieved under the loop resonance. Furthermore, the frequency reconfiguration of MNMs has been investigated for the first time, leading to broadband and multiband isolators.

Design of New Linear Optical Isolation Circuit

Research and Design of Analog Signal High-speed Isolation with Optical Coupler

A Fully Integrated, Low-Cost, High Channel Utilization Digital Isolator in Standard CMOS with 50mbps and 100kv/μs CMTI

New Design of A Polarization-Independent in case of a cascaded isolator.(4) Optical Isolator with High Performance

Design and implementation of an analog signal isolation conditioning circuit

Isolation Enhancement Based On Adaptive Leakage Cancellation

Integrated optical isolators based on two-mode interference couplers

New design of a polarization-independent optical isolator with high performance

Wavelength-Selective Optical Waveguide Isolator Based on Nonreciprocal Ring-Coupled Mach–Zehnder Interferometer

Design and Analysis of Linear Photo-Electric Isolating Amplifier Circuit with Single Power Supply and Full Output

Design of analog channel for low-speed and isolation data acquisition system

Optical Isolation by Time-Dependent Sinusoidal-Shaped Structures

Complete linear optical isolation at the microscale with ultralow loss

Experimental Demonstration of Cavity-Free Optical Isolators and Optical Circulators

Demonstration of A Chip-Based Optical Isolator with Parametric Amplification

Filling in the Missing Link: Monolithic Optical Isolators on Silicon with High Performance, Broadband Operation, and Polarization Diversity

Monolithic On-chip Magneto-optical Isolator with 3 Db Insertion Loss and 40 Db Isolation Ratio

Low-Noise Broadband Differential Optoisolator for Langmuir Probes

All-optical Isolator under Arbitrary Linearly Polarized Fundamental Wave in an Optical Superlattice

Highly Linear and Magnetless Isolator Based on Weakly Coupled Nonreciprocal Metamaterials

Lightweight Low-Noise Linear Isolator Integrating Phase-Engineered Temporal Loops