Microstructure and mechanical properties of Ti–Nb–Fe–Zr alloys with high strength and low elastic modulus
Qi HUANG,Jun-jie LI,Qian-feng HE,Masaaki NAKAI,Ke ZHANG,Mitsuo NIINOMI,Kenta YAMANAKA,Akihiko CHIBA,Takayoshi NAKANO,Qiang LI
DOI: https://doi.org/10.1016/s1003-6326(22)65811-4
IF: 3.752
2022-02-01
Transactions of Nonferrous Metals Society of China
Abstract:Zr was added to Ti–Nb–Fe alloys to develop low elastic modulus and high strength β-Ti alloys for biomedical applications. Ingots of Ti–12Nb–2Fe–(2, 4, 6, 8, 10)Zr (at.%) were prepared by arc melting and then subjected to homogenization, cold rolling, and solution treatments. The phases and microstructures of the alloys were analyzed by optical microscopy, X-ray diffraction, and transmission electron microscopy. The mechanical properties were measured by tensile tests. The results indicate that Zr and Fe cause a remarkable solid-solution strengthening effect on the alloys; thus, all the alloys show yield and ultimate tensile strengths higher than 510 MPa and 730 MPa, respectively. Zr plays a weak role in the deformation mechanism. Further, twinning occurs in all the deformed alloys and is beneficial to both strength and plasticity. Ti–12Nb–2Fe–(8, 10)Zr alloys with metastable β phases show low elastic modulus, high tensile strength, and good plasticity and are suitable candidate materials for biomedical implants.
metallurgy & metallurgical engineering