Abstract:Background: Platinum (Pt), palladium (Pd), rhodium (Rh) and iridium (Ir) are platinum group elements (PGEs) and also important elements of geochemistry and environmental chemistry with the similar physic-chemical properties, which have been widely used in industry and laboratory. However, due to the low abundance and inhomogeneous distribution in natural ore as well as the nugget effect, the accurate determination of PGEs has been a challenge to analytical chemistry. Methods: In this work, a novel fire assay method was reported for the determination of ultra-trace Pt, Pd, Rh and Ir in geochemical samples. Tin powder (Sn) instead of stannic oxide (SnO 2 ) was used as a fire assay collector to reduce the melting temperature from 1250°C to 1050°C, the escape of molten material caused by high temperature was successfully avoided. Tin bead was compressed into thin slice and dissolved by HCl. For the target Pt, Pd, Rh and Ir, HCl insoluble substance such as PtSn 4 , PdSn 4 , RhSn 4 and Ir 3 Sn 7 were formed and separated from matrix by filtering. The metal compounds precipitate together with filter paper were microwave-assisted completely digested by aqua regia (50%, v/v), thence the sample solution was determined by inductively coupled plasma mass spectrometry (ICP-MS). Results: Compared with nickel oxide and lead oxide in nickel sulfide /lead fire assay, the reagent blank of tin powder were relatively low and could be directly employed in tin fire assay to collect Pt, Pd, Rh and Ir without purifying. Moreover, the harm of nickel oxide and lead oxide to the analyst and environment was avoided by using the non-toxic tin powder. The decomposition method of chromite and black shale was investigated as well as the amount of tin powder and flour, microwave digestion program for the determination of Pt, Pd, Rh and Ir were optimized. Besides, the influence of mass spectrum interference of co-existing elements was discussed and the standard mode and kinetic energy discrimination collision pool mode were compared. Under the optimal conditions, excellent curve fitting of Pt, Pd, Rh and Ir were obtained between 0.01~100 ng mL -1 , with the correlation coefficients exceeding 0.9996. The detection limits were from 0.003 ng g -1 to 0.057 ng g -1 . Conclusion: The developed method was applied to analyze the Chinese Certified Reference Materials and the determined values were in good agreement with the certified values.

Simultaneous Determination of Fe,Ni,Cu,V and Pb in Hydrocracking Catalyst by ICP-AES

Simultaneous Determination of Copper, Cadmium and Cobalt in Zinc Electrolyte by Inductively Coupled Plasma Atomic Emission Spectrometry

Study on the Method for Determination of Sulfate in Fe-catalyst by Inductively Coupled Plasma Atomic Emission Spectrometry

Simultaneous determination of 5 elements in chrome iron ore samples by inductively coupled plasma-opti-cal emission spectrometry

Determination of tungsten,nickel,iron and vanadium in cobalt chromium tungsten alloy by inductively coupled plasma atomic emission spectrometry

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Multi-Element Determination in Chalcopyrite by Inductively Coupled Plasma Atomic Emission Spectrometry

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

ICP-AES Determination of 5 Chemical Components in Chromium Ores

Further Improvement of Flame Atomic Absorption Spectrometric Determination for Cu, Pb and Cd After Preconcentration Using a Rapid Coprecipitation Technique

Determination of Ni,Al,P,Mg and Ca in Nickel Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry

Study of the Method to Measure Ni,Cu,Fe,Pb and Te in Crude Selenium Materials Using ICP-AES

In-situ Determination of Metallic Variation and Multi-Association in Single Particles by Combining Synchrotron Microprobe, Sequential Chemical Extraction and Multivariate Statistical Analysis.

On-line Electrolytic Dissolution of Alloys and Multi-Element Determination by Inductively Coupled Plasma Atomic Emission Spectrometry

Simultaneous Determination of Ultra-trace Pt, Pd, Rh and Ir in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry Following Tin Fire Assay Preconcentration and Microwave Digestion

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Quantification of Trace Amounts of Impurities in High Purity Cobalt by High Resolution Inductively Coupled Plasma Mass Spectrometry

Isotope dilution inductively coupled plasma time-of-flight mass spectrometry (ID-ICP-TOFMS) with desolvating sample introduction and He collision gas for high-accuracy determination of Rh, Pd and Pt in automobile catalytic converters

Determination of micro content cabon element in catalytic cracking catalyst by coulometry

ICP-AES Determination of Lead,Arsenic,Cadmium and Mercury in Lead Concentrates with Microwave Assisted Sample Digestion

Determination of Metals in Microporous Carbon Molecular Sieve and Its Eluent by Inductively Coupled Plasma Atomic Emission Spectrometry