The Design and Implementation of I/O System Based on Μc/os-Ii

Xiaoping Yang

2010-01-01

Abstract:Discussion of the design and implementation of I /O system with keyboard and LCD display Based on μc/os-Ⅱ.Discussion of hardware design,interrupt management,system configuration,task switching as well as method for programming function menus.

What problem does this paper attempt to address?

Constructing of Software Platform Based on Μc/os-ⅱ

华亮,杨世锡

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.15.071

2004-01-01

Abstract:This paper introduces a software platform based on μC/OS-Ⅱ. Realization of system modules such as kernel extension, TCP/IP protocol stack, file system is discussed. This platform provides utilities for application based on μ C/OS-Ⅱ and makes the work easier and faster.
The Control System Based on ARM and Μc/os-Ii for Die-casting Machine

乌宇杰,陈章位

DOI: https://doi.org/10.3969/j.issn.1001-3881.2009.01.040

2009-01-01

Abstract:The die-casting machine control system based on EP9315 and μC/OS-Ⅱ,a kind of realtime embedded operating system,was introduced.The hardware and software structures of the control system were presented.The controlling of the die-casting machine was acrieved.
Software Design of an Intelligent Car System Based on Μc/os-Ii

Yang,Yan Wenjun

DOI: https://doi.org/10.1109/chicc.2006.280780

2006-01-01

Abstract:This paper mainly presents the application of RTOS μC/OS-II in a system of a mobile car based on the Samsung ARM7 micro processor S3C44B0X. By the scheduling method of multi-task RTOS, we solve the problem of poor real-time performance in single task design method, as well as improve the system's reliability. In this paper, we first explain the transplant of μC/OS-II briefly, and then we elaborate the whole design of system software and running regulation of individual task.
Design of an Intelligent Car System Based on Μc/os-Ii

Wenjun Yan

2006-01-01

Abstract:The application of RTOS μC/OS-II in a system of a mobile car based on the Samsung ARM7 micro processor S3C44B0X was mainly presents.By the scheduling method of multi-task RTOS,we solve the problem of poor real-time performance in single task design method,as well as improve the system's reliability.The transplant of μC/OS-II briefly was addressed first,and the whole design of system software and running regulation of individual task was elaborated.
Μc/os-Iiand Its Application in Welding Robot System

Yang Li

2005-01-01

Abstract:The special features of μC/OS-Ⅱ are discussed in general.According to the characteristics of welding,the advantages of applying μC/OS-Ⅱ in the welding field are analyzed.And the application of μC/OS-Ⅱ in man-machine interface of high-speed double-wire MIG welding robot is also introduced.
A Method of Interactive Interface for Embedded ControIIer

吴波,许力

DOI: https://doi.org/10.3969/j.issn.1001-182X.2014.06.013

2014-01-01

Abstract:This paper proposes a generaI framework design for LCD muIti-IeveI menu,aiming at the design for interactive interface of controI er based on ARM.Then this paper puts forward a method for efficient keystrokes and interactive input,which can avoid traditionaI keys' jitter as weI as improve the utiIizationof I/O portby appIying touch keys,and take advantage of the structure variabIe in the C Ianguage to set the parameters.Themethod has got practicaI appIicationin the design of the ten-sion controI er system.
Development of the Control System of Automatic Flat Knitting Machine Based on Μc/os-ⅱ Embedded Technology

Jian-fei L(U),Jian-zhong FU,Dan LIU

DOI: https://doi.org/10.3321/j.issn:0253-9721.2006.01.009

2006-01-01

Abstract:A new control system of the fully automatic flat knitting machine developed based onμC/OS-Ⅱ embedded technology was introduced,and the functional requirements of the flat knitting machine and execution of its control system were analyzed.This system used a 32-bit ARM microprocessor and an expander as the hardware carriers and theμC/OS-Ⅱas the real time operation system.It adopted the design of multi-tasks,and realized the task scheduler by its priority and communications between tasks with theμC/OS-Ⅱoperation system.
Porting the μC/GUI To the μC/OSⅡ

LIU BIN,LIU JINGJING,CAO XUYANG

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.02.009

2007-01-01

Abstract:μC/GUI is a kind of graphic user interface software, which is used widely in the embedded system. The paper introducesthe characteristics of the μC/GUI and the principle of the kind of LCD called YD-502. It also provides the hardware design diagramwhich connects the LCD with the ARM7 and gives the process of porting the μC/GUI to the μC/OSII based on the combination ofthe moving principle.
DESIGN OF μC/OS-Ⅱ-BASED OS FOR VEHICLE EQUIPMENT

Fan Shiyi,Zhou Xuehai,Chen Xianglan

DOI: https://doi.org/10.3969/j.issn.1000-386X.2011.07.077

2011-01-01

Abstract:Conforming to OSEK/VDX specifications along with μC/OS-Ⅱ kernel characteristics and comparing their differences,by modifying the μC/OS-Ⅱ kernel,the authors have designed an embedded OS for vehicle equipment that conforms to OSEK/VDX specifications.They further elaborate in detail the main design idea from the aspects of task management and scheduling,resource management,alerter and counter management,event management and interruption management etc.
Design and research of control system for digital inkjet based on μC/OS-Ⅱ

Liu Jin,Yang Yichen,Gu Binbin

DOI: https://doi.org/10.3969/j.issn.1674-7720.2013.19.031

2013-01-01

Abstract:This paper designs a new high-speed inkjet printers on the platform of Cyclone II series EP2C8Q208 of Altera corporation, utilizing μC/OS-II operating system, and Nios II 11.0 Eclipse tools and various techniques like Nios II soft-core processor in order to generate μC/OS-II real-time operating system module. Besides, combining with system programming that realize a new high-speed control system of inkjet printers.Testing demonstrates that the proposed system is able to exhibit good performance in terms of stability and operability.
Design of Network File Management System Based on Nios II

葛春雨,王秋生,梅顺良

DOI: https://doi.org/10.3969/j.issn.1002-8692.2008.10.035

2008-01-01

Abstract:Based on Nios Ⅱ processor designed by Altera Corporation,System on Programmable Chip(SoPC) is built by SoPC builder.The SDRAM controller, Ethernet chip controller, SD Card controller, UART and jtag_uart or other user components are integrated in this system.Then, the software about communications and file system functions are realized based on μC/OS Ⅱ operate system.
Design and Realization of Genie Shell for Uc/os-Ii

Lu Gan

2009-01-01

Abstract:In order to solve the inconvenience caused by uC/OS-Ⅱ lacking for command interface,the idea of designing Shells for uC/ OS-Ⅱ is brought forward.On the basis of introducing the hardware platform,the general working flow of the Shell is shown,its serial port functions and the realization process of main tasks are described.Besides an example of drawing commands are given to illustrate the realization and expanding methods for Shell commands.The testing indicates the Shell operates steadily,better accomplishes the communication between human and machine and has nicer portability and expansibility.
Inter-processor Communication Interface Design in Complementary Multiprocessor Systems

Ke Pei,Gang Zhang

DOI: https://doi.org/10.1109/NISS.2009.266

2009-01-01

Abstract:The latest multiprocessor platforms are ideal for implementing multi-OS embedded applications. IPC (inter-processor communication) interface makes it possible for a multiprocessor system to easily support multiple subsystems parallel processing. In this paper, we propose a new type of OS-level communication interface designing based-on CMPS (complementary multiprocessor system) and present the primary principles and corresponding driver structure of HP I (host-port interface). Take a single-board embedded multimedia system which was integrated three embedded microprocessors (PXA255, TMS320DM642 and SM501) as hardware platform, detailed description of how implement tasks communication and A/V (audio/video) data transform via HPI between different OS(Linux and muC/OS-II) running on ARM and DSP separately.
Design of Man-Machine Interactive Module in Power Quality Meter

NIU Bo,SONG Zhengxiang,WANG Jianhua,GENG Yingsan,ZHANG Zichi

DOI: https://doi.org/10.3969/j.issn.1001-5531.2007.05.005

2007-01-01

Abstract:The realization of a kind of simple real-time operation system was discussed, which constituted the platform of software system of device. The architecture of hardware and software of humanity and machine interface in power quality meter of intelligent low voltage distribute system was introduced.Using μC/OS-Ⅱ as the platform of device software system with adding priority inheritting function, the layered design idea of system software was presented,and the software design of liquid crystal display and key task was introduced.
Design of control system based on μC/OSII for seed processing machinery

Quan Zhang,Dayue Chen,ChunYu Zhao

2009-01-01

Abstract:In order to improve the automation and intelligence standard of the seed processing equipment, a set of control system based on Micro Controller Unit(MCU) was proposed. The system is modular designed, and can be divided into the main control circuit based on C8051F020 as the core and the external control circuits. With these modules, certain control system can be built up easily by selecting modules with corresponding function. Furthermore, the real-time operating system μC/OSII was transplanted into the main control board. With its help, the coding of the controlling program has been simplified as the planning for all the tasks, which would be also helpful for improving the reliability and shortening the development time. The whole system has successfully been applied into the control of the seed drying machine. The result indicated that the system can easily fulfill the aim to create a common controlling system with a low cost.
Design and Implementation of Μc/os-ⅱ Virtualization

杨晓亮,吴俊敏,栾兰,巩哲

DOI: https://doi.org/10.3969/j.issn.1000-3428.2011.16.083

2011-01-01

Abstract:This paper presents a high-performance and high-secure embedded virtual machine model for OKL4.Based on the model,a virtualization solution for μC/OS-Ⅱ on OKL4 is designed,and it involves CPU virtualization design and memory virtualization design.The construction process of the virtual hardware abstraction layer is detailed.The method of porting μC/OS-Ⅱ to the virtual hardware abstraction layer is presented.Test results on Hi3611 smart phone developing board show that the virtualization solution is correct.
Software Design of Host Computer Control System of Electronic Jacquard Controller Based on Qt

Jiaxing DONG,Meiqin LIU,Zhen FAN,Senlin ZHANG,Hejin LIU

DOI: https://doi.org/10.3969/j.issn.1005-2895.2018.01.012

2018-01-01

Abstract:A software of host computer control system of electronic jacquard controller was designed to achieve unified management of jacquard machines and centralized production.Debian which is one of Linux operating systems was used as the platform for interactive interface.The function of display and operating were implemented using touch screen with GUI based on Qt framework.Multi-thread was used to achieve one-to-many communication between host computer and client computers and achieve data exchange through TCP communication.The pattern editing module was designed to realize the display,editing and saving functions of the pattern file.Debugging results in the factory show that this system works stably and has a good experience of human-computer interaction(HCI), and it can satisfy the requirements of control of electronic jacquard system well.
Design Of A Digital Storage Oscillograph System Based On Mu C/Os-Ii And Arm

Zhu Zhengwei,Qu Haiqing,Yang Changchun

2009-01-01

Abstract:This paper presents a design scheme of the digital storage oscillograph based on mu C/OS-II embedded operating system and the ARM processor core. Hardware architecture uses modular design, and the processor accesses to a variety of I/O external resources through high scalability EBI (External Bus Interface). The system collects and stores the waveform data through high-speed data acquisition system and AID conversion modules. Display module adopts high-color TFT-LCD screen and realizes the display of the relevant parameters, waveforms and Chinese menu. In addition, this paper describes the principle of interpolation algorithm commonly used in Digital Storage Oscillograph, and gives a brief on mu C/OS-II system for transplants and UC/GUI graphical interface system for application.
OS-Level IPC Implementation in Complementary Multi-processor Systems

Ke Pei,Gang Zhang,Chang Qing

DOI: https://doi.org/10.1109/APWCS.2010.26

2010-01-01

Abstract:Most of embedded multiprocessor platforms are ideal for running diverse operating systems and implementing different applications. Inter-processor communication interface makes it possible for an embedded multi-processor system to easily support multiple subsystems parallel processing. This paper propose a kind of OS-level communication interface implementing method based-on HPI in the Complementary Multi-processor System and present the primary principles and corresponding DSP side code structure for HPI. Take a single-board embedded multimedia system which was integrated three embedded microprocessors (PXA255, TMS320DM642 and SM501) as hardware platform, detailed description of how implement tasks communication and data transform by HPI between different embedded OS(ARM-Linux and μC/OS-II) running on ARM and DSP separately.
Application of μC/OS-H in monitoring and control system of telecommunication power supply

Kai-dong GUO,Dong-lai ZHANG,Guang-ming SU

DOI: https://doi.org/10.3969/j.issn.1006-6047.2005.04.018

2005-01-01

Abstract:The transplant of embedded operating system μC/OS-II to AVR mega 128 is introduced. With a centralized monitoring and control system of telecommunication power supply as an example,the hardware structure and software design are described and the application of μC/OS-II in objective system is illuminated. Some measures to ensure its reliability are depicted and the key points in system debugging are put forward. The application of μC/OS-II changes the developing process of embedded system,which makes the system have enough universality, real-time performance and expandability.

The Design and Implementation of I/O System Based on Μc/os-Ii

Constructing of Software Platform Based on Μc/os-ⅱ

The Control System Based on ARM and Μc/os-Ii for Die-casting Machine

Software Design of an Intelligent Car System Based on Μc/os-Ii

Design of an Intelligent Car System Based on Μc/os-Ii

Μc/os-Iiand Its Application in Welding Robot System

A Method of Interactive Interface for Embedded ControIIer

Development of the Control System of Automatic Flat Knitting Machine Based on Μc/os-ⅱ Embedded Technology

Porting the μC/GUI To the μC/OSⅡ

DESIGN OF μC/OS-Ⅱ-BASED OS FOR VEHICLE EQUIPMENT

Design and research of control system for digital inkjet based on μC/OS-Ⅱ

Design of Network File Management System Based on Nios II

Design and Realization of Genie Shell for Uc/os-Ii

Inter-processor Communication Interface Design in Complementary Multiprocessor Systems

Design of Man-Machine Interactive Module in Power Quality Meter

Design of control system based on μC/OSII for seed processing machinery

Design and Implementation of Μc/os-ⅱ Virtualization

Software Design of Host Computer Control System of Electronic Jacquard Controller Based on Qt

Design Of A Digital Storage Oscillograph System Based On Mu C/Os-Ii And Arm

OS-Level IPC Implementation in Complementary Multi-processor Systems

Application of μC/OS-H in monitoring and control system of telecommunication power supply