Abstract:The hot gas duct vessel (HGDV) is an important part of the high-temperature reactor pebble-bed module (HTR-PM) primary loop pressure boundary system. It connects the reactor pressure vessel (RPV) and steam generator pressure vessel. Because the dimensions of the HGDV are smaller than those of the other two vessels, it is often considered the weakest of the three vessels. Therefore, the safety of the HGDV has become one of the most important issues in the design of the HTR-PM. In the present paper, a comprehensive safety analysis of the HGDV in the HTR-PM was performed with an emphasis on the structural features. The designs of the HGDV and the support system of the primary loop pressure boundary are first described. A preliminary safety analysis of the HGDV, including the stress calculations and leak-before-break (LBB) analysis, is then presented. The results show that the stress levels of the HGDV under various accidents have a safety margin of at least 55.3% compared with the stress limits specified in American Society of Mechanical Engineers code, and the stress intensity factor at the postulated flaw is less than the critical stress intensity factor. The LBB analysis indicated that the leak detection system is capable of detecting leaks caused by a postulated through-thickness crack in the HGDV before it reaches the critical size. Although the preliminary analysis has proved the safety of the HGDV, the consequences of a hypothetical HGDV double-ended break accident were also studied to further investigate the safety features of the HTR-PM. Several mitigation measures were employed based on the original design. The structural integrity of the support system, the reactor internals, and the containment under double-ended break accident were evaluated. The results show that these main structures could maintain integrity under the HGDV double-ended break accident.

Structural Features and In-Service Inspection of the LTNHR-200 Pressure Vessel

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Experimental Analysis on Residual Performance of Used 70 MPa Type IV Composite Pressure Vessels

Considerations for In-Service Inspection on Pressure Vessel of 200MW Nuclear Heating Reactor

Cause Analyses of the Weld Seam Cracks of a Prehydrogenating Reactor

Technical Design-Features And Safety Analysis Of The 200 Mwt Nuclear Heating Reactor

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Installation Method for the Steel Container and Vessel of the Nuclear Heating Reactor

Technical Progress of Safety Assessment and Non-Destructive Measurement for Pressure Vessel at High Temperature (ii)——integrity Assessment Approaches

Design and Fabrication of Carbon-Fiber-wound Composite Pressure Vessel with HDPE Liner

Failure analysis of 2205 duplex stainless steel connecting pipe for composite plate pressure vessel in a high pressure gas field

Hydraulic pressure test of pressure vessel of 10 MW high temperature gas-cooled reactor

Failure Analysis on Unexpected Fracture of the Hydraulic Expansion Mandrel for Tube to Tubesheet Expanding in the Steam Generator of Nuclear Power Plant

Safety analysis for hot gas duct vessel in HTR-PM

Combined Evaluation Composite Pressure Vessel With Thin-Wall Metal Liner By Acoustic Emission And Strain Gauges

Design Features of Secondarycontainment of NHR200

Thermalhydraulic Investigation Using a Test Facility Simulating 200 MW Integral Heating Reactor

Numerical Simulation and Optimization of In-Vessel Primary Heat Exchangers of NHR200-II

Multi-Scale Failure Analysis Model for Cryogenic Pressure Vessel Under Combined Thermal Stress and Mechanical Stress

Structural Health Monitoring of Filament Wound Pressure Vessel by Embedded Strain Gauges

Microstructure of Pressure Boundary Welded Joint of CAP1400 Steam Generator