Abstract:The mechanical response of asphalt pavement under vehicular loading is an essential reference for crack-resistant pavement design. However, limited research focuses on the mechanical response measurement of asphalt pavement using a large-particle-size crushed stone base treated with fly ash and slag powder. Therefore, two types of asphalt pavements were constructed. The first type of asphalt pavement uses a large-particle-size crushed stone base treated with fly ash and slag powder, where the slag powder uses granulated blast furnace slag powder. The second type uses a conventional cement-stabilized crushed stone base and serves as a reference structure. Firstly, the strain gauges and temperature sensors were installed during the construction of asphalt pavements. Secondly, the mechanical response of the pavement was tested at different speeds and service time conditions. Then, sensitivity analysis and three-factor analysis of variance (ANOVA) were carried out. Finally, the prediction equations were developed. The results show that the longitudinal strain pulse of the asphalt layer exhibited a “compression–tension–compression” characteristic. For the transverse strain pulse of the asphalt layer, the base layer’s transverse and longitudinal strain pulses were only shown as “tensile” characteristics. The vehicular speed significantly affected the strain values for the base and asphalt layers, showing a decreasing trend with increasing speed. For the asphalt layer, the strain values showed an increasing trend with increasing temperature; for the base layer, the strain values showed a decreasing trend with increasing service time. The type of base layer had a significant effect on the strain value. Compared with the conventional base layer, the large-particle-size crushed stone base treated with fly ash and slag powder had lower strain at the base layer and a lower position of the asphalt layer, which could better prevent bottom-up fatigue cracking. Finally, the strain prediction model of the pavement under the speed and temperature (service time) was fitted to obtain a model that can predict the mechanical response of the pavement under different operating conditions. The findings of this research can provide a reference for the design of asphalt pavement using a large-particle-size crushed stone base treated with fly ash and slag powder.

Preliminary Results of Accelerated Load Testing (ALT) for Different Asphalt Materials

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Rutting Mechanism Analysis Of Heavy-Duty Asphalt Pavement Based On Pavement Survey, Finite Element Simulation, And Instrumentation

Preliminary Design of Testing Segment for Accelerated Loading Facility Based on Finite Element Simulation Analysis

Application of FBG strain sensors in the measurement of three-directional strains within asphalt pavement

Study on fatigue performance of asphalt mixture in service life based on accelerated loading test

High-Temperature Rheological Characteristics of Asphalt Binder Incorporated with Graphene Oxide and Predicting Its Rutting Potential Using Response Surface Method

Dynamic Strain Response of Hot-Recycled Asphalt Pavement under Dual-Axle Accelerated Loading Conditions

Dynamic Response Monitoring and Analysis of In-Service Asphalt Pavement Based on FBG Measuring Technology

Investigation on the Micro Deformation Mechanism of Asphalt Mixtures under High Temperatures Based on a Self-Developed Laboratory Test

Real-time monitoring for asphalt pavement using fiber Bragg grating sensor

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Asphalt Pavement Compaction Monitoring Based on Fiber Grating Sensing Technology

Research on the high temperature performance of asphalt pavement based on field cores with different rutting development levels

Research on Strain Field of Asphalt Pavement Based on FBG Sensor Technique

Field Measurement of Three-Direction Strain Response of Asphalt Pavement

Field Measurement and Analysis on the Mechanical Response of Asphalt Pavement Using Large-Particle-Size Crushed Stone Base Treated with Fly Ash and Slag Powder

Rutting Resistance Analysis of Structure Combinations for Asphalt Pavement Subjected to Heavy Loads

Evaluation of factors that affect rutting resistance of asphalt mixes by orthogonal experiment design

Analysis on Mechanical Response of Asphalt Pavement Structure Based on 3 D Viscoelastic Finite Element Method