Abstract:The detection and evaluation of internal corrosion of concrete bridge decks is of critical importance for bridge structure safety. Ground penetrating radar (GPR) is a nondestructive testing technique that has been used widely for corrosion assessment of RC bridge decks. However, the recognition accuracy of traditional automatic data processing methods for blurred hyperbolic features is insufficient, which leads to a decrease in the accuracy of bridge deck corrosion assessment. To address this problem, this paper proposes an automatic rebar picking algorithm based on gradient information and a migration method for bridge deck corrosion assessment with GPR data. This method can be divided into three steps: thresholding processing based on B-scan gradient information, a limited hyperbolic summation-based recognition (LHSR) algorithm, and rebar localization. First, the GPR B-scan is transformed into its gradient image and thresholded to enhance hyperbolic features. The LHSR algorithm then is applied to the binarized gradient B-scan to identify the hyperbolas, locate the rebar, and extract the rebar reflection amplitude. Finally, the corrosion map of the bridge deck is generated based on the rebar position and the rebar reflection amplitude after depth-correction. A case study with GPR data from two tested bridges was employed to validate the feasibility of the proposed method. The results show that the precision and recall of automatic rebar picking by this method for poor-quality GPR data were 91.27% and 93.56%, which are significantly higher than those of the traditional methods. Moreover, the accuracy of the bridge deck corrosion map obtained by the proposed method also is significantly better than that of the traditional methods. It can be concluded that the proposed method can be used for rebar picking and corrosion assessment of RC bridge decks with GPR data. Ground penetrating radar is a nondestructive testing technology that has been used widely for corrosion assessment of concrete bridge decks. However, the traditional automatic processing method of GPR data has insufficient recognition accuracy for blurred features of rebars, resulting in a decrease in the accuracy of bridge deck corrosion assessment. To address this problem, this paper proposes an automatic method that can be used for feature identification and location of rebars. The corrosion map generated by the position and reflection amplitude of rebars could help engineers to conduct corrosion assessment and repair of concrete bridge decks. The feasibility of the proposed method was validated through a case study with GPR data form two actual bridges. Especially for poor-quality GPR data, the accuracy of rebar picking and corrosion maps of this method is significantly higher than that of traditional methods. It can be concluded that the proposed method can be used for rebar positioning and corrosion assessment of concrete bridge decks based on GPR inspection data.

Automatic Rebar Picking for Corrosion Assessment of RC Bridge Decks with Ground-Penetrating Radar Data

Point Cloud and Machine Learning-Based Automated Recognition and Measurement of Corrugated Pipes and Rebars for Large Precast Concrete Beams

Real Depth-Correction in Ground Penetrating RADAR Data Analysis for Bridge Deck Evaluation

Health Assessment of a Pedestrian Bridge Deck using Ground Penetrating Radar

Automated damage detection of bridge’s sub-surface defects from infrared images using machine learning

The Design of 3-D Ground-Penetrating Radar System for Bridge Inspection

Deep Learning-Based Rebar Clutters Removal and Defect Echoes Enhancement in GPR Images

Autonomous robotic system using non-destructive evaluation methods for bridge deck inspection

Detection and localization of rebar in concrete by deep learning using ground penetrating radar

Combined GPR and Self-Potential Techniques for Monitoring Steel Rebar Corrosion in Reinforced Concrete Structures: A Laboratory Study

Detection of accelerated reinforcement corrosion in concrete by ground penetrating radar

Comprehensive Bridge Deck Deterioration Mapping of Nine Bridges by Nondestructive Evaluation Technologies

Evaluation of Delaminations and Defects in Concrete Deck Using Non-Destructive Multi-Physical Scanning Technology

Automated Crack Detection on Concrete Bridges

Strategy for vertical deformation of railway bridge monitoring using polarimetric ground-based real aperture radar system

An Improved Convolutional Neural Network System for Automatically Detecting Rebar in GPR Data

Rebar Clutter Suppression and Road Defects Localization in GPR B-Scan Images Based on SuppRebar-GAN and EC-Yolov7 Networks

Simultaneous Estimation of Rebar Diameter and Cover Thickness by a GPR-EMI Dual Sensor

Validated ground penetrating radar simulation model for estimating rebar location in infrastructure monitoring

Detection of corrosion effects on prestressed concrete bridge deck slabs from the champlain bridge through non‐destructive testing techniques

Analysis and Integration of Surface and Subsurface Information of Different Bridges