The Mosaic of Rottlerin.

Kenneth K C Hong,G. Ball,D. Black,N. Kumar

DOI: https://doi.org/10.1021/acs.joc.5b01827

2015-10-14

Abstract:The first total synthesis of rottlerin is described. The methodology allows the development of potential novel protein kinase C δ (PKCδ) analogues for better treatment of various diseases. Kamalachalcone A and dimeric rottlerin were synthesized in a very practical and economical way using FeCl3 as a catalyst.

What problem does this paper attempt to address?

Point Cloud and Machine Learning-Based Automated Recognition and Measurement of Corrugated Pipes and Rebars for Large Precast Concrete Beams

Jiangpeng Shu,Xiaowu Zhang,Wenhao Li,Ziyue Zeng,He Zhang,Yuanfeng Duan

DOI: https://doi.org/10.1016/j.autcon.2024.105493

IF: 10.3

2024-01-01

Automation in Construction

Abstract:It is important for quality inspection to quickly identify the correctness of the installation position of corrugated pipes and rebars on construction site. A point clouds and machine learning-based automated recognition and measurement method was developed for long reinforcement cages with corrugated pipes of concrete beams. A segmentation framework combining radius nearest-neighbor covariance characteristics and a clustering algorithm is proposed to extract information of reinforcement cages and corrugated pipes. Besides, the rebars and corrugated pipes are fitted based on an improved random sample consensus method and Newton iteration circle fitting method, respectively. Experimental results demonstrated that the measurement error of the positions of corrugated pipes was only 1.84%. The measurement accuracy of the stirrup spacing was 98.00%. The proposed method is feasible and accurate for identifying reinforcement cages and corrugated pipes, so that construction control and assurance can be achieved for the large precast concrete components.
Estimating the diameter of reinforcing bars using an ultra-wideband MIMO GPR array

Weixia Cheng,Hai-Han Sun,Kang Hai Tan,Zheng Fan

DOI: https://doi.org/10.1016/j.conbuildmat.2022.129924

IF: 7.4

2022-12-17

Construction and Building Materials

Abstract:Ground-penetrating radar (GPR) is an effective non-destructive detection technology for locating and characterizing reinforcing bars in concrete structures. However, the accurate quantification of reinforcing bar diameters, especially in small-diameter cases, remains a challenging issue. In this paper, a sizing method based on multiple-input-multiple-output (MIMO) GPR arrays is presented to estimate the reinforcing bar diameter in concrete. The method employs a linear array of ultra-wideband (UWB) antennas to acquire the full-matrix MIMO data of the reinforcing bar embedded in concrete. The diffraction stacking algorithm is applied to the obtained MIMO data to reconstruct the reinforcing bar. The 3 decibels (dB) drop technique is used to measure the chord length that passes through the peak intensity point of the reconstruction image of the reinforcing bar. Following that, the diameter of the reinforcing bar can be determined based on its cover depth and the chord length. Extensive numerical studies and experiments have been conducted to examine the performance of the proposed method in different scenarios. The method shows excellent sizing accuracy for reinforcing bars with different diameters and cover depths.

construction & building technology,materials science, multidisciplinary,engineering, civil
Pleural Fluid Adenosine Deaminase (ADA) Predicts Survival in Patients with Malignant Pleural Effusion

R. Terra,L. Antonangelo,A. Mariani,R.M. Oliveira,L. Teixeira,P. Pêgo-Fernandes

DOI: https://doi.org/10.1007/s00408-016-9891-2

2016-06-14

Lung

Abstract:
Measuring soil layer thickness in land rearrangement with GPR data

xianlei xu,suping peng,wu xiao,yang yu

DOI: https://doi.org/10.1088/0957-0233/25/7/075802

IF: 2.398

2014-01-01

Measurement Science and Technology

Abstract:Accurate measurement of soil layer thickness by GPR (ground penetrating radar) is of great importance for overlay design and quality control/quality assurance for land rearrangement projects. Soil layer detection is complex because of multiple reflections and high attenuation for electromagnetic (EM) waves propagating in the soil media. This paper proposes a novel data processing method based on the reflection and refraction of the EM waves to improve the measurement accuracy. A cross-correlation sequence is introduced to align the traces, and the effects of random noise are reduced by using a forwards and backwards filtering procedure without phase delay. Additionally, the homomorphic deconvolution, namely the power cepstrum, is employed to deconvolve GPR data and, thus, to enhance its interface reflection. The results of the verification test show that the measurement can achieve high accuracy, with an error less than 10%, and the measurement performance is greatly improved by using the new method. Finally, a contour map of the research area is generated automatically for quality detection and quality control guidance.
Diameter Estimation of Cylindrical Metal Bar Using Wideband Dual-Polarized Ground-Penetrating Radar

Hai-Han Sun,Weixia Cheng,Zheng Fan

DOI: https://doi.org/10.48550/arXiv.2212.13021

2022-12-26

Abstract:Ground-penetrating radar (GPR) has been an effective technology for locating metal bars in civil engineering structures. However, the accurate sizing of subsurface metal bars of small diameters remains a challenging problem for the existing reflection pattern-based method due to the limited resolution of GPR. To address the issue, we propose a reflection power-based method by exploring the relationship between the bar diameter and the maximum power of the bar reflected signal obtained by a wideband dual-polarized GPR, which circumvents the resolution limit of the existing pattern-based method. In the proposed method, the theoretical relationship between the bar diameter and the power ratio of the bar reflected signals acquired by perpendicular and parallel polarized antennas is established via the inherent scattering width of the metal bar and the wideband spectrum of the bar reflected signal. Based on the theoretical relationship, the bar diameter can be estimated using the obtained power ratio in a GPR survey. Simulations and experiments have been conducted with different GPR frequency spectra, subsurface mediums, and metal bars of various diameters and depths to demonstrate the efficacy of the method. Experimental results show that the method achieves high sizing accuracy with errors of less than 10% in different scenarios. With its simple operation and high accuracy, the method can be implemented in real-time in situ examination of subsurface metal bars.

Signal Processing
A new method and device for detecting rebars in concrete based on capacitance

Xiaofeng Han,Gege Li,Penggang Wang,Zhaoyi Chen,Dongbo Cui,Hai Zhang,Li Tian,Xiangming Zhou,Zuquan Jin,Tiejun Zhao

DOI: https://doi.org/10.1016/j.measurement.2022.111721

IF: 5.6

2022-10-01

Measurement

Abstract:This study aims at developing a convenient and efficient rebar detection method based on capacitance that can be used to precisely locate the state (i.e., diameter and position) of the rebars in concrete. Finite element analysis was used to optimize the electrode of the capacitive sensor and verify that using the developed capacitive sensor to detect rebar in concrete is feasible and reliable. Based on the detected capacitance, the position of the rebar in concrete can be located. The relationships among capacitance, rebar diameter, and cover thickness are explored. Both the peak value and the peak area of capacitance evolve linearly with rebar diameter and exponentially with cover thickness. The 3D diagrams among the capacitance peak value, peak area, and rebar diameter or cover thickness are established in this research. The experimental result agrees well with the numerical results, which verifies the reliability of the capacitive sensor and detection methods established.

engineering, multidisciplinary,instruments & instrumentation
Combined GPR and Self-Potential Techniques for Monitoring Steel Rebar Corrosion in Reinforced Concrete Structures: A Laboratory Study

Giacomo Fornasari,Luigi Capozzoli,Enzo Rizzo

DOI: https://doi.org/10.3390/rs15082206

IF: 5

2023-04-22

Remote Sensing

Abstract:Steel rebar corrosion is one of the main causes of the deterioration of engineering reinforced structures. Steel rebar in concrete is normally in a non-corroding, passive condition, but these conditions are not always achieved in practice, due to which corrosion of rebars takes place. This degradation has physical consequences, such as decreased ultimate strength and serviceability of engineering concrete structures. This work describes a laboratory test where GPR and SP geophysical techniques were used to detect and monitor the corrosion phenomena. The laboratory tests have been performed with several reinforced concrete samples. The concrete samples were partially submerged in water with a 5% sodium chloride (NaCl) solution. Therefore, an accelerated corrosion phenomenon has been produced by a direct current (DC) power supply along the rebar. The geophysical measurements were performed with a 2.0 GHz centre frequency GPR antenna along several parallel lines on the samples, always being the radar line perpendicular to the rebar axis. The GPR A-scan amplitude signals were elaborated with the Hilbert Transform approach, observing the envelope variations due to the progress of the steel rebar corrosion in each concrete sample. Moreover, Self-Potential acquisitions were carried out on the surface of the concrete sample at the beginning and end of the experiments. Each technique provided specific information, but a data integration method used in the operating system will further improve the overall quality of diagnosis. The collected data were used for an integrated detection approach useful to observe the corrosion evolution along the reinforcement bar. These first laboratory results highlight how the GPR should give a quantitative contribution to the deterioration of reinforced concrete structure.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Evaluation of Ultrasonic SH-Waveform Tomography for Determining Cover Thickness and Rebar Size in Concrete Structures

Ruoyu Chen,Khiem T. Tran,Kien Dinh,Christopher C. Ferraro

DOI: https://doi.org/10.1007/s10921-022-00866-1

2022-04-13

Journal of Nondestructive Evaluation

Abstract:The simultaneous detection of cover depth and rebar diameter are among the most frequently encountered issues for inspecting concrete for quality control and assurance, or evaluating a concrete structure. This paper presents a novel application of 2D full-waveform inversion of ultrasonic SH-waves (2D SH-FWI), for determining cover depth and size of embedded rebar. The method was applied to ultrasonic SH-wave datasets collected by a commercial shear-wave tomography system (MIRA) on four concrete specimens. Two of them had 10 steel bars of the same size (#5) embedded at various depths, and the other two had 10 steel bars of various sizes (#3 to #14) placed at the same cover depth of 65 mm. The results showed that the presented 2D SH-FWI was able to characterize both the depths and sizes of rebars. Except for the smallest rebar # 3, the difference between the inverted and true sizes is less than 30% for 9 rebars (#4 to #14 at 65-mm cover depth), and less than 33% for all 10 rebars (#5) at various depths from 25 to 140 mm. For comparison, the rebar sizes could not be obtained with the ultrasonic synthetic aperture focusing technique and GPR method, which only detected the cover thickness.

materials science, characterization & testing
Inspection of reinforced concrete structures using Ground penetrating radar: Experimental approach

Majed A. Almalki,Khalid F. Almutairi

DOI: https://doi.org/10.1016/j.jksus.2024.103140

IF: 3.829

2024-02-19

Journal of King Saud University - Science

Abstract:This study aims to the practical detection of sub-meter scale voids located inside reinforced concrete structures with different diameters and depths using different frequency antennas of 800 MHz, 1000 MHz, 1200 MHz, and 1600 MHz. The experiment was performed on two concrete blocks with medium-sized voids between 70 and 100 mm diameter, and small-sized voids between 10 and 25 mm diameter. A GPR survey was conducted by dividing each block into two grids of profiles with 50- and 100-mm profile spacing. Then, GPR data was collected along both the horizontal and vertical directions of each block with multi-frequency antennas. The gathered data was processed in 2D and 3D to detect the exact location, dimension, and brightness of these voids. The results showed that GPR has the potential to be quite effective in automating the identification and location of embedded voids within concrete blocks. The accuracy with which the system was able to identify void locations depended mainly on the frequency of the antenna used and the diameter of the void, while the depth of penetration was inversely proportional to the frequency of the used antenna, with estimated depths ranging from 25 cm (using a 1600 MHz antenna) to 1.5 m (using 800 MHz antenna). Moreover, a GPR survey was conducted to evaluate two sites inside residential buildings before and after the rehabilitation process. The radar scan exhibited a notable proficiency in identifying the positions of rebar sites, whether they were situated at a single level or two levels, inside certain areas of construction. The study revealed the ability of GPR to identify the depth of the reinforcing steel within the cement material, particularly in areas where the soil has experienced subsidence.

multidisciplinary sciences
Improvement of GPR-Based Rebar Diameter Estimation Using YOLO-v3

Sehwan Park,Jinpyung Kim,Kyoyoung Jeon,Junkyeong Kim,Seunghee Park

DOI: https://doi.org/10.3390/rs13102011

IF: 5

2021-05-20

Remote Sensing

Abstract:As the frequency of earthquakes has increased in Korea in recent years, designing earthquake-resistant facilities has been increasingly emphasized. Structures constructed with rebars are vulnerable to shaking, which reduces their seismic performance and may result in damage to human life and property. Because the construction of facilities requires the maintenance of sub-constructions, such as by cutting rebars or compensating for missing rebars, information on rebar diameter is required. In this study, the YOLO-v3 algorithm, which has the fastest object recognition performance, was applied to the structural correction data, and a basic experiment was conducted in the air to predict the diameter of rebars in a facility, in real time based on ground-penetrating radar data. The reason for using the YOLO-v3 algorithm is that in the case of GPR data that change slightly according to the diameter of the reinforcing bar, it is difficult to discriminate with the naked eye, and the result may change depending on the inspector. The model achieved a higher accuracy than conventional rebar detection and diameter prediction methods. In addition, the possibility of real-time rebar diameter prediction during construction, using the proposed method, was verified.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Rebar inspection integrating augmented reality and laser scanning

H.-L. Chi,M.-K. Kim,K.-Z. Liu,J.P.P. Thedja,J. Seo,D.-E. Lee

DOI: https://doi.org/10.1016/j.autcon.2022.104183

IF: 10.3

2022-04-01

Automation in Construction

Abstract:Assuring conformity regarding the number, spacing, and location of rebars is an important quality control task in a rebar operation. Nonconformity attributed to missing or mislocated rebars adversely affects structural performance and construct-ability. Rebar craftsmen normally read two-dimensional (2D) shop drawings and install rebars after converting 2D objects to three-dimensional objects in a cognitive image. To ensure conformity, the installation is inspected manually, hence, being tedious and costly. Existing sensing technologies do not lend themselves to effective visualization of the data obtained by the sensing process either in practice or academia. This paper presents an end-to-end method that addresses the existing limitation by hybridizing augmented reality (AR) and laser scanning technologies to provide intuitive and accurate rebar inspection. The AR prototype visualizes rebar inspection outputs and provides rework instructions in an effective manner. An experiment validating the method was performed using a laboratory-scale rebar layout. The results confirmed that the method successfully highlights detailed dimensional information of mislocated rebars and provides inspectors with intuitive rework instructions. Indeed, the method provides a way to detect and repair the nonconformity involved in rebar positions regardless of type, shape, and/or complexity. The method encourages accurate rebar dimensional inspection and intuitive visualization, hence, contributing to effective rebar quality control.

construction & building technology,engineering, civil
Real Depth-Correction in Ground Penetrating RADAR Data Analysis for Bridge Deck Evaluation

Sepehr Pashoutani,Jinying Zhu

DOI: https://doi.org/10.3390/s23021027

2023-01-16

Abstract:When ground penetrating radar (GPR) is used for the non-destructive evaluation of concrete bridge decks, the rebar reflection amplitudes should be corrected for rebar depths to account for the geometric spreading and material attenuation of the electromagnetic wave in concrete. Most current depth-correction methods assume a constant EM wave velocity in the entire bridge deck and correct GPR amplitudes based on the two-way travel time (TWTT) instead of the actual rebar depth. In this paper, we proposed a depth-correction algorithm based on the real rebar depths. To compare different depth-correction methods, we used gprMax software to simulate GPR signals in four models with various dielectric constants and conductivity. The comparison shows that the TWTT-based depth-correction method tends to over-correct GPR amplitudes so that underestimates the deterioration level of concrete decks at certain locations. Two depth-based correction methods are proposed that use migrated amplitudes and further normalize the corrected amplitude by rebar depth (attenuation rate). These methods are then applied to GPR data collected on two bridges, and the results were validated by other NDE methods and chloride concentration test.
Intelligent Detection of Rebar Size and Position Using Improved DeeplabV3+

Wei Chen,Xianglin Fu,Wanqing Chen,Zijun Peng

DOI: https://doi.org/10.3390/app131911094

2023-01-01

Abstract:For the development of reinforced concrete structures and infrastructure construction, traditional rebar checking and acceptance methods have shortcomings in terms of efficiency. The use of digital image processing technology cannot easily identify a rebar configuration with complex and diverse backgrounds. To solve this problem, an inspection method combining deep learning and digital image processing techniques is proposed using an improved DeeplabV3+ model to identify reinforcing bars, with the identification results subjected to digital image processing operations to obtain the size information of the reinforcing bar. The proposed method was validated through a field test. The results of the experiment indicated that the proposed model is more accurate than other models, with a mean Intersection over Union (mIoU), precision, recall, and F1 score reaching 94.62%, 97.42%, 96.95%, and 97.18%, respectively. Moreover, the accuracy of the dimension estimations for the test reinforcements met the engineering acceptance standards.
Accuracy of Ground-Penetrating Radar for Concrete Pavement Thickness Measurement

George Morcous,Ece Erdogmus

DOI: https://doi.org/10.1061/(asce)cf.1943-5509.0000123

2010-12-01

Journal of Performance of Constructed Facilities

Abstract:Core extraction is the most common method for measuring concrete layer thickness in pavement construction. Although this method provides a very accurate thickness measurement, it is destructive, time-consuming, and does not provide adequate representation of the concrete layer thickness variability. Ground-penetrating radar (GPR) is a nondestructive evaluation technique that has been successfully used in several transportation applications, such as subsurface exploration and condition assessment. The main objective of this research is to investigate the accuracy and cost-effectiveness of using GPR in thickness measurement of concrete pavement for quality assurance purposes. A high-resolution 1.6-MHz ground-coupled antenna was used to perform grid scans and measure concrete thickness for several laboratory and field experiments. Results indicated that the use of metal objects underneath the concrete layer to improve bottom surface reflectivity was necessary for a reliable thickness measurement. Also, the use of calibration cores to determine the actual dielectric properties of the concrete was essential for accurate thickness calculation. An average accuracy of 98.5% was achieved when steel plates were used underneath the concrete layer and two cores were extracted for calibration. The effect of concrete age on GPR thickness measurement accuracy was also investigated.

construction & building technology,engineering, civil
Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

Lei, Inhong,Jin, Xianyu,Tian, Ye,Lin, Xingmin,Jin, Nanguo,Yan, Dongming,Li, Zongjin,Zheng, Wenbin,Sun, Xingliang,Lin, Hao,Yan, Yongmao,Xu, Zhen

DOI: https://doi.org/10.1007/s13349-021-00521-9

2021-01-01

Journal of Civil Structural Health Monitoring

Abstract:Based on magnetic medium theory, a newly invited magnetic corrosion detector (MCD) showed great potential in quantitative monitoring the corrosion process of steel rebar in concrete. To furtherly explore the application performance of MCD, a numerical model was established to simulate the magnetic induction intensity variation caused by corrosion of steel rebar. And the influence of the length and the positioning variance of steel rebar on the measurement were discussed based on experimental and numerical investigation. The research results indicate that the numerical simulation is a valid approach to reveal the essential performance of MCD in measuring the corrosion ratio of steel rebar in concrete. Based on the geometric and physical properties of MCD, the corrosion ratio of the steel rebar can be effectively measured. And the positioning variance of steel rebar has significant influence on the precision and sensitivity of MCD. It is suggested that the steel rebar should be placed right at the center of the test area during the measurement to achieve a high accuracy.
Real-Time Asphalt Pavement Layer Thickness Prediction Using Ground-Penetrating Radar Based on a Modified Extended Common Mid-Point (XCMP) Approach

Siqi Wang,Zhen Leng,Xin Sui,Weiguang Zhang,Tao Ma,Zehui Zhu

DOI: https://doi.org/10.1109/TITS.2023.3343196

2024-01-07

Abstract:The conventional surface reflection method has been widely used to measure the asphalt pavement layer dielectric constant using ground-penetrating radar (GPR). This method may be inaccurate for in-service pavement thickness estimation with dielectric constant variation through the depth, which could be addressed using the extended common mid-point method (XCMP) with air-coupled GPR antennas. However, the factors affecting the XCMP method on thickness prediction accuracy haven't been studied. Manual acquisition of key factors is required, which hinders its real-time applications. This study investigates the affecting factors and develops a modified XCMP method to allow automatic thickness prediction of in-service asphalt pavement with non-uniform dielectric properties through depth. A sensitivity analysis was performed, necessitating the accurate estimation of time of flights (TOFs) from antenna pairs. A modified XCMP method based on edge detection was proposed to allow real-time TOFs estimation, then dielectric constant and thickness predictions. Field tests using a multi-channel GPR system were performed for validation. Both the surface reflection and XCMP setups were conducted. Results show that the modified XCMP method is recommended with a mean prediction error of 1.86%, which is more accurate than the surface reflection method (5.73%).

Signal Processing
Combined Application of Novel Electromagnetic Sensors and Acoustic Emission Apparatus to Monitor Corrosion Process of Reinforced Bars in Concrete

Zhe Li,Zuquan Jin,Xiangbo Xu,Tiejun Zhao,Penggang Wang,Zongjin Li

DOI: https://doi.org/10.1016/j.conbuildmat.2020.118472

IF: 7.4

2020-01-01

Construction and Building Materials

Abstract:Reinforced bar corrosion is a primary reason for performance deterioration of reinforced concrete (RC) structures. Corrosion monitoring of reinforced bars in concrete is a key point to evaluate the durability and the remaining service life of structures, especially in marine environments. Non-destructive tests (NDTs) have been developed as critical methods to assess damage levels inside concrete without external damage based on physical characterization (e.g., electromagnetic response, acoustic signals, etc.). This paper provides a novel idea where home-made electromagnetic (EM) sensors and an acoustic emission (AE) apparatus are combined in order to monitor the entire corrosion process of reinforced concrete beams; meanwhile, a home-made electromagnetic sensor is also upgraded and introduced in this paper. The result shows that it is an excellent option to jointly utilize two kinds of monitoring apparatus to monitor signals from corrosion initiation and subsequent cracking, respectively, based on their own physical performances. Moreover, the reliability of monitoring signals is also highlighted in this paper.
Plasma cortisol, corticosterone and urea in acute myocardial infarction: clinical and biochemical correlations.

K. Wiener

DOI: https://doi.org/10.1016/0009-8981(77)90103-6

1977-04-15

Abstract:
Autonomous dimensional inspection and issue tracking of rebar using semantically enriched 3D models

Chun-Cheng Chang,Tsung-Wei Huang,Yi-Hsiang Chen,Jacob J. Lin,Chuin-Shan Chen

DOI: https://doi.org/10.1016/j.autcon.2024.105303

IF: 10.3

2024-02-11

Automation in Construction

Abstract:Accurate and efficient inspection of rebar dimensions has proven to be a persistent challenge for researchers and practitioners. This paper introduces a semantically enriched 3D model-based system that employs computer vision and deep learning for location-aware identification and tracking of rebar issues. The system comprises four modules: (A) digital twin generation, (B) segmentation, (C) inspection, and (D) issue identification and tracking. The generation module constructs 3D models from rebar structures. The segmentation and inspection modules analyze the 3D models, enriching them with semantic information. The issue identification and tracking module exchanges information between the semantically enriched 3D models and the building information models across time. An experiment on a column rebar cage is conducted. A precision of over 90% and a recall of over 97% are reported in 3D instance segmentation. Diameter inspection achieves an accuracy of 95.5% for large-size rebars. Spacing inspection achieves a mean relative error of 0.98%. The defective spacing is identified and tracked.

construction & building technology,engineering, civil

The Mosaic of Rottlerin.

Point Cloud and Machine Learning-Based Automated Recognition and Measurement of Corrugated Pipes and Rebars for Large Precast Concrete Beams

Estimating the diameter of reinforcing bars using an ultra-wideband MIMO GPR array

Pleural Fluid Adenosine Deaminase (ADA) Predicts Survival in Patients with Malignant Pleural Effusion

Measuring soil layer thickness in land rearrangement with GPR data

Diameter Estimation of Cylindrical Metal Bar Using Wideband Dual-Polarized Ground-Penetrating Radar

A new method and device for detecting rebars in concrete based on capacitance

Combined GPR and Self-Potential Techniques for Monitoring Steel Rebar Corrosion in Reinforced Concrete Structures: A Laboratory Study

Evaluation of Ultrasonic SH-Waveform Tomography for Determining Cover Thickness and Rebar Size in Concrete Structures

Inspection of reinforced concrete structures using Ground penetrating radar: Experimental approach

Improvement of GPR-Based Rebar Diameter Estimation Using YOLO-v3

Rebar inspection integrating augmented reality and laser scanning

Real Depth-Correction in Ground Penetrating RADAR Data Analysis for Bridge Deck Evaluation

Intelligent Detection of Rebar Size and Position Using Improved DeeplabV3+

Accuracy of Ground-Penetrating Radar for Concrete Pavement Thickness Measurement

Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

Real-Time Asphalt Pavement Layer Thickness Prediction Using Ground-Penetrating Radar Based on a Modified Extended Common Mid-Point (XCMP) Approach

Combined Application of Novel Electromagnetic Sensors and Acoustic Emission Apparatus to Monitor Corrosion Process of Reinforced Bars in Concrete

Plasma cortisol, corticosterone and urea in acute myocardial infarction: clinical and biochemical correlations.

Autonomous dimensional inspection and issue tracking of rebar using semantically enriched 3D models