Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Discontinuous-long-fibre (DLF) composites fabricated from pre-impregnated unidirectional (UD) fibre chips are susceptible to structural deficiency. The in-plane highly anisotropic mechanical properties of the chips combined with the random nature of fibre orientation causes local weaknesses within the material when fibres are perpendicular to the load. Recent experimental results have shown that using woven-fibre chips could improve the performance of DLF composites by increasing their average mechanical properties and reducing their variability. To better understand the underlying phenomenon giving an advantage to the woven chips, a finite element model was developed to predict the mechanical properties obtained from a standard tensile test. DLF chips were modelled based on a voxel method where random chip positions were generated by an algorithm developed in this work. ANSYS® software was utilized to model the non-linear response associated with progressive damage of the composite. The maximum stress and the Puck failure criteria were employed to define damage initiation for the woven and UD fibres, respectively. Tensile modulus predictions for both types of chips showed good results when compared to experimental data. Strength predictions for the UD fibres also showed good correlation with experimental results, but the model overestimated the strength of the woven-fibre DLF composite. It appeared that the failure of the UD-fibre composites was associated with matrix failure (transverse tension and in-plane shear). Woven-fibre composites, however, showed damage modes linked to both fibre failure (longitudinal tension) and matrix failure (transverse tension and in-plane shear).

A Failure Prediction Method of Fiber-Reinforced Composite Wing Stringer Subjected to Compressive Loading

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Progressive failure analysis of 2D woven composites at the meso-micro scale

Computational Micromechanics-Based Prediction of the Failure of Unidirectional Composite Lamina Subjected to Transverse and In-Plane Shear Stress States

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

A Novel Integrated Modeling Strategy for Predicting Damage Mechanisms and Energy Dissipation of Composite Stiffened Structures under Low-Velocity Impact and Compression

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

Multiscale Progressive Failure Analysis for Composite Stringers Subjected to Compressive Load

Failure Analysis of Hat-Stringer-Stiffened Aircraft Composite Panels under Four-Point Bending Loading

Progressive Failure Analysis of Laminated CFRP Composites under Three-Point Bending Load

Prediction of Failure Envelopes and Stress–strain Curves of Fiber Composite Laminates under Triaxial Loads

Failure prediction of marine non-planar composite π joints based on combined 2D material model and progressive damage method

Prediction Method for Re-Damage Behavior of the Repaired CFRP Bolted Joint

Fatigue-driven failure criterion for progressive damage modelling and fatigue life prediction of composite structures

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Life Prediction Methodology for Composite Laminates

Failure Analysis of Carbon Fiber/epoxy Composite Cylindrical Laminates Using Explicit Finite Element Method

An Investigation on Residual Strength and Failure Probability Prediction for Plain Weave Composite under Random Fatigue Loading

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

An efficient micromechanics-based finite element model for failure analysis of laminated composites