Abstract:The surface chemical modified aluminum hypophosphite (AHP) defined as MAHP was successful prepared through P–H bonds on AHP surface reacted with the aldehyde groups in hexa-(4-aldehyde-phenoxy)-cyclotriphosphazene made in our lab. The wettability of the flame retardants was evaluated by water contact angle tests, and the water contact angle of the prepared MAHP dramatically increased from 0° for AHP to 145°, which indicated the surface modification made the superhydrophilic AHP into superior hydrophobic MAHP. The prepared MAHP and AHP, respectively, incorporated into polyamide 6 (PA6) matrix to prepare flame retardant PA6 composites and the fire retardancy and thermal degradation behavior of flame retardant PA6 composites were investigated by limiting oxygen index, vertical burning test (UL-94), cone calorimeter, and thermogravimetric analysis tests. The morphologies and chemical compositions of the char residues for PA6 composites were investigated by scanning electron microscopy and X-ray photoelectron spectroscopy, respectively. The water resistant properties of flame retardant PA6 composites were evaluated by putting the samples into distilled water at 70°C for 168 hr, and the mechanical properties for flame retardant PA6 composites were investigated by the tensile, flexural, and Izod impact strength tests. The results demonstrated that the PA6/MAHP composites successfully passed UL-94 V-0 flammability rating, and the limiting oxygen index value was 27.6% when the loading amount of MAHP was 21 wt%. However, there is no rating in vertical burning tests for PA6/AHP composite with the same amount of AHP, which indicated the surface modification of AHP enhanced the flame retardancy efficiency for PA6 composites. The morphological structures and analysis of X-ray photoelectron spectroscopy of char residues revealed that the surface modification of AHP benefited to the formation of a sufficient, flame retardant elements rich, more compact and homogeneous char layer on the materials surface during combustion, which prevented the heat transmission and diffusion, limit the production of combustible gases, inhibit the emission of smoke and then led to the reduction of the heat release rate and smoke produce rate. The mechanical properties results revealed that the surface modification of AHP enhanced the mechanical properties, especially the Izod impact strength comparing with that of PA6/AHP composites with the same amount of flame retardant. After water resistance tests, the PA6/MAHP composites remained superior flame retardancy and presented continuous and compact char layer after cone calorimeter tests; however, the fire retardancy for PA6/AHP composite obviously decreased, and the char layer was discontinuous with big hole caused by the extraction of AHP by water during water resistance tests. Copyright © 2017 John Wiley & Sons, Ltd.

Preparation of New Flame Retardant Unsaturated Hollow Integrated Sandwich Composites Based on ATH Surface Modification

Enhanced Thermal Properties and Flame Retardancy of Unsaturated Polyester-Based Hybrid Materials Containing Phosphorus and Silicon

Facile Synthesis of Aluminum Branched Oligo(phenylphosphonate) Submicro-Particles with Enhanced Flame Retardance and Smoke Toxicity Suppression for Epoxy Resin Composites.

Synthesis of a bio‐based in‐suit reinforcing flame retardant containing DOPO group and its application in EP

Synergistic Flame-Retardant Mechanism of Dicyclohexenyl Aluminum Hypophosphite and Nano-Silica

Preparation and characterization of flame-retardant aluminum hypophosphite/poly(vinyl alcohol) composite

Effect of surface chemical modification for aluminum hypophosphite with hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene on the fire retardancy, water resistance, and thermal properties for polyamide 6

Novel Flame Retardants Containing 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide and Unsaturated Bonds: Synthesis, Characterization, and Application in the Flame Retardancy of Epoxy Acrylates

Hybrids of Aluminum Hypophosphite and Ammonium Polyphosphate: Highly Effective Flame Retardant System for Unsaturated Polyester Resin

A Study on Developing Fire Retardant HIPS Nano-composites

A New Method to Prepare Flame Retardant Polymer Composites

A Phosphorous-Based Bi-Functional Flame Retardant Based on Phosphaphenanthrene and Aluminum Hypophosphite for an Epoxy Thermoset

Two high-efficient DOPO-based phosphonamidate flame retardants for transparent epoxy resin

Synthesis and Characterization of a Novel DOPO-Based Flame Retardant Intermediate and Its Flame Retardancy as a Polystyrene Intrinsic Flame Retardant

Synthesis and characterization of a DOPO-substitued organophosphorus oligomer and its application in flame retardant epoxy resins

DOPO-Modified Two-Dimensional Co-Based Metal-Organic Framework: Preparation and Application for Enhancing Fire Safety of Poly(lactic acid)

Synergistic Improvement of Flame Retardancy and Mechanical Properties of Epoxy/Benzoxazine/Aluminum Trihydrate Adhesive Composites

Fabrication of Diatomite‐based Microencapsulated Flame Retardant and Its Improved Fire Safety of Unsaturated Polyester Resin

Reactable versus soluble DOPO derivatives in poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) composites: Flame retardance, mechanical properties and morphology

Preparation of Microencapsulated Aluminum Hypophosphite and Its Flame Retardancy of the Unsaturated Polyester Resin Composites

Polydimethylsiloxane Wrapped Aluminum Diethylphosphinate for Enhancing the Flame Retardancy of Polyamide 6