Abstract:The proposed bandgap voltage reference (BGR) realizes the second‐order temperature compensation by adding a sum current branch and a differential current branch to the conventional low‐voltage first‐order temperature‐compensated current‐mode BGR structure. The sum‐current branch is composed of two metal‐oxide‐semiconductor (MOS) transistors, and the difference‐current branch consists of four MOS transistors, respectively. This simple low‐voltage second‐order temperature‐compensated structure achieves lower temperature coefficient (TC) than the conventional first‐order temperature‐compensated current‐mode BGR. Summary A current‐mode (CM) bandgap voltage reference (BGR) with second‐order curvature compensation is presented in this paper. The proposed CM BGR offers a simple compensation structure that requires only six additional transistors compared with traditional BGR designs, making it an attractive solution for low temperature coefficient (TC) voltage references. Proportional to absolute temperature (PTAT) current digital‐to‐analog converters (DACs) are used to suppress the effect of process variation and device mismatch on TC. The compensation signal is generated using the voltage difference of two bipolar junction transistor (BJT) emitter–bases whose currents are the sum and difference of the PTAT current and the zero to absolute temperature (ZTAT) current, respectively. The proposed CM BGR is designed with 0.18‐μm BIPOLAR CMOS DMOS process. A TC is 2.41 ppm/°C over a wide temperature range of −40°C to 150°C. The linear sensitivity of the supply voltage from 1.2 to 2 V is 0.027%/V. With an active area of 0.0721 mm2, it consumes 68 μA at room temperature. The integrated output noise from 0.1 to 10 Hz is 21.9 μV.

Design of High Precision Bandgap Voltage Reference with Second-Order Curvature Correction in Bi-CMOS Process

A High Precision Circuit of Bandgap Voltage Reference

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

Super Performance CMOS Band-Gap Voltage Reference

A High Precision Bandgap Voltage Reference with MOS Transistor Curvature Compensation in 65-Nm CMOS Process

A Curvature Compensation Technique for Low-Voltage Bandgap Reference

New Curvature-Compensated CMOS Bandgap Voltage Reference

Bandgap Voltage Reference Design with Enhanced Tolerance of Process Variations

A 2.41 ppm/°C bandgap voltage reference with second‐order curvature compensation

A 3.95 ppm/°C 7.5 μW Second-Order Curvature Compensated Bandgap Reference in 0.11 μm CMOS

Cmos 2.5v Bandgap Voltage Reference

Low Supply Bandgap Voltage Reference

A Precise Curvature Compensated CMOS Bandgap Voltage Reference with Sub 1V Supply

A 1.2-V 2.18-ppm/°C curvature-compensated CMOS bandgap reference

A Bandgap Reference Design with Novel Curvature Compensation

Bandgap Reference Design by Means of Multiple Point Curvature Compensation

A2.1-ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation.

CMOS 1.5V Bandgap Voltage Reference