Abstract:<p>Cables and hangers are critical components of long‐span bridges, tension forces of them are needed to be accurately measured for ensuring the safety of bridges. Traditionally, cable tension forces are measured by attached accelerometers or elastomagnetic (EM) sensors, however, applying these sensors into engineering practice are time‐consuming, labor‐intensive, and highly dangerous. To address these problems, an unmanned aerial vehicle (UAV)‐based noncontact cable force estimation method with computer vision technologies was proposed in this article. Basic concept of the proposed method is to use the UAV‐installed camera for capturing vibration images of cables from a certain distance and cable dynamic properties are extracted by analyzing captured images. It includes two aspects: (a) a line segments detector (LSD) was employed for detecting cable edges from captured video and a line matching algorithm was further proposed for extracting dynamic displacements; (b) the frequency difference of adjacent higher modal frequencies identified from relative displacements of the cable was employed for cable force calculation to avoid the difficulty of extracting fundamental frequency from UAV‐captured video. It should be noted that relative displacement herein refers to the difference between displacements of two points on the same cable. Advantages of the proposed method lie in that the proposed LSD and matching algorithm are more robust than traditional correlation‐based algorithm for calculating dynamic displacements of bridge cables and it does not need to adjust predefined parameters (i.e., subset size in correlation‐based algorithms). In addition, the combination of relative displacement and frequency difference‐based cable force estimation has the capability of enhancing the Fourier spectrum magnitude of bridge cables and reducing the effect of UAV motion on extraction of cable vibration frequencies. The effectiveness and robustness of the proposed method was verified by using an experimental inclined cable and field‐testing data of a long‐span suspension bridge. Results show that calculated cable forces with UAV technology have a good agreement with reference values measured by attached accelerometers and fixed camera, demonstrating correctness and robustness of the proposed method for cable force estimation.</p>

Mode Shape-Aided Cable Force Estimation of a Double-Hanger System Using a Vision-Based Monitoring Method

Force Monitoring of Steel Cables Using Vision-Based Sensing Technology: Methodology and Experimental Verification

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

A Novel Approach for Cable Tension Monitoring Based on Mode Shape Identification

Monitoring of the Internal Force of the Flexible Components by Vibration Method

Tension Force Estimation of Short Cable Employing Axis-Shift Imaging and Multiple Mode Shapes

New Method for Identifying Internal Forces of Hangers Based on Form-Finding Theory of Suspension Cable

Research on Stay Cable Tension Estimation Based on Vision-Based Monitoring System

Noncontact cable force estimation with unmanned aerial vehicle and computer vision

Analytical methods for the assessment of hanger forces of a suspension bridge based on measured main cable configuration

Target-free Measurement of Cable Forces Based on Computer Vision and Equivalent Frequency Difference

Computer vision‐based real‐time cable tension estimation algorithm using complexity pursuit from video and its application in Fred‐Hartman cable‐stayed bridge

A vision-based method for estimating shallow cable tension via vibrational properties

Fast and robust vision-based cable force monitoring method free from environmental disturbances

Variational Mode Decomposition Based Time-Varying Force Identification of Stay Cables

Assessment of cable tension condition based on optimum cable tension of cable-stayed bridge

Experimental verification and rapid estimation of uncalibrated cable force via video-based and vibration-based measurements

Identification of Time-Varying Cable Tension Forces Based on Adaptive Sparse Time-Frequency Analysis of Cable Vibrations

Adaptive Identification of Time-Varying Cable Tension Based on Improved Variational Mode Decomposition

Modal Identification and Cable Tension Estimation of Long Span Cable-Stayed Bridge Based on Ambient Excitation

A Real-Time Monitoring System for Cable Tension with Vibration Signals Based on an Automated Algorithm to Sieve Out Reliable Modal Frequencies