Design of a Simple Antenna Pattern Measurement System

Weidong Hu

2012-01-01

Abstract:A simply designed antenna pattern measuring system is displayed in this paper.In order to effectively control the system,get and draw the antenna pattern rapidly,the GUI user interface is used to develop the testing software.

What problem does this paper attempt to address?

The Design of a Simple Millimeter-Wave Antenna Automatic Measurement System

Weizheng Zhang,Houjun Sun,Xin Lv

DOI: https://doi.org/10.1109/ISAPE.2006.353484

2006-01-01

Abstract:A design method of millimeter-wave antenna automatic measurement system is presented in this paper. The design method can reduce the cost of the antenna measurement system effectively. The design of the transmitter, receiver and the data acquisition card are described in detail and then the measurement operational flow is given.
Implementation of A Far-Field Antennas Automation Measurement System

Pan Yuhu,Wei Gao

DOI: https://doi.org/10.3969/j.issn.1002-7300.2005.03.031

2005-01-01

Abstract:A Far-Field antennas measurement system is offered in this paper, Which is mairily made up of Agilent 8363a PNA and rotator. The software for this automation control system is developed using Visual C, with Winsock and DCOM technology. This remote control system not only can control PNA and rotator, but also can do data analysis and display. This simple configuration of system contributes good reliability.
A Simple System for Measuring Antenna Radiation Patterns in the Wi-Fi Band

Tong Zhang,Li Du,Jing,Bin Zhou,Yan Yang,Xiao Yang Zhou,Qiang Cheng,Jie Pei,Tie Jun Cui

DOI: https://doi.org/10.1109/map.2013.6474524

2013-01-01

Abstract:A scheme for cheaply, easily, and accurately measuring the gains and radiation patterns of Wi-Fi-band antennas is presented. Considering the cost, size, and convenience, a high-gain microstrip Vivaldi antenna, based on anisotropic zero-index metamaterials, is used for the transmitter. A homodyne receiver is designed to simplify the receiver's architecture. Implementing an RF switch and a dual-polarized antenna, the design is also suitable for testing non-standard-polarization antennas. The proposed measurement system has been validated by comparing the results to a commercial measurement system.
Design and Implementation of Missile Antenna Cover's Auto-Measurement System

Wei-jun ZHANG,Bu-ge LIANG,Nai-chang YUAN,Yi LI

DOI: https://doi.org/10.3321/j.issn:1000-1328.2006.z1.016

2006-01-01

Abstract:To measure the electric parameters of a missile antenna cover accurately, the technology of virtual instrument was used, the soft of Lab View was adopted, the technique of multithreading was introduced, and the auto-measure system for an antenna cover measurement, which based on the instrument and the rotation table working harmoniously, was constructed. The design makes use of the latency function of the instrument. The system can measure eight groups of data from four channels at the same time, and compare amplitudes and phases simultaneously, which gready improves the measurement efficiency and precision of the antenna array measurement. The system can display the 3D and 2D figures of the measure data, which is very helpful for understanding the measure status expediently. The system satisfies the requirement of the test, and the implementation of the system is very helpful for the design of a microwave auto-measure system.
Design and implementation of an antenna measurement system for the mono-pulse radar

Lizhong Song,Yi N. Mu,Xiaolin Qiao,Qun Wu

DOI: https://doi.org/10.1109/ICOSP.2008.4697745

2008-01-01

Abstract:The mono-pulse radars have been widely used in many fields such as target tracking because they have high angle measurement accuracy and good anti-jamming ability. It is important to research, develop and measure the mono-pulse radar antennas. This paper design a kind of mono-pulse antenna measurement system based on turning table, step motor controller, vector network analyzer and the Visual Basic development environment. The antenna measurement system has two channels to acquire and analyze data, then the sum and difference directional pattern of the antenna can be measured fast and accurately. Based on the theorem of the mono-pulse antenna measurement system, this paper introduces the system hardware structure and the software implementation scheme in detail. Finally, some basic practical measurements were done and the experiment measurement results indicate that the system can basically satisfy the design requirements.
Design and implementation of control software for radar antenna performance index test system

Bin Deng,Chaohua Liang,Jingjing Wang,Wei Lv

DOI: https://doi.org/10.1088/1742-6596/2724/1/012017

2024-03-16

Journal of Physics Conference Series

Abstract:According to the actual requirements of radar antenna performance testing, focusing on the design of the instrument control software of the test system, in this paper, the functional requirement of the instrument control software of the system is analyzed, the basic framework of the software design is put forward, and the design ideas and implementation methods of the instrument and equipment management as well as the specific design methods of the instrument and equipment control are given. Practical applications have shown that the control software has advantages such as an intuitive interface, convenient operation, and good interactivity. Combined with system hardware, it can achieve fast and accurate measurement of radar antenna performance and has high practical value.
A Rapid Calibration and Pattern Test Method for Phased Array Antenna

Ma Rui,Liu Guodong,Wang Xiaofei,Zhou Shigang

DOI: https://doi.org/10.1109/IMWS-AMP53428.2021.9643891

2021-01-01

Abstract:In this paper, a method for rapid calibration and pattern test of phased array antennas is presented. To begin with, the composition of the near-field test system is introduced. Furthermore, the optimized test procedure aimed at reducing the number of scans is proposed. Furthermore, the implementation scheme of the calibration controller is described, which reduces the loading delay of the T/R control code to within 50 us through real-time computing. Finally, the real-time performance and effectiveness of this method are analyzed. It shows that the method can test hundreds of combinations of frequencies and pointing angles through a round of scanning, which significantly improves the test efficiency.
Antenna Real-Time Measuring System Based on Multithreading Technology

HAN Xu,WEI Gao,LI Rui-yang,FU Li

DOI: https://doi.org/10.3969/j.issn.1004-373x.2013.13.034

2013-01-01

Abstract:An antenna real?time measuring system based on multithreading technology was established,which has high de?mand of real?time. Multithreading technology with its unique advantages can well meet the need ,which can carry out multi?tasks concurrently and make full use of the performance of multiprocessor. All measured parameters could be inpu into the sy?etem software UI,and the UI would respond the user operation timely. In addition to this thread,extra worker threads could be created to make additional functions work in parallel,thus the real?time of the system is increased. The running status of the in?struments and the measuring progress of the system is updated and displayed in real?time on the UI so as to show the system sta?tus to users. At the same time,the measuring data is read and saved in real?time for further dispose and research in the future.
The small antenna design based on RFID

WANG Sha,DING Jun,GUO Chen-jiang

DOI: https://doi.org/10.3969/j.issn.1674-6236.2013.12.057

2013-01-01

Abstract:The band of 915MHz is in common used in RFID.In this paper we design an antenna working in this band,and simulated the antenna with the Ansoft HFSS.We slotted on the patch and the GND to broaden the band and make it more stable.At the same time the antenna is smaller than before and has a better capability.
Patch Antenna Radiation Pattern Evaluation Based on Phaseless and Single-Plane Near-Field Scanning

Yufei Shu,Xingchang Wei,Yanbin Yang

DOI: https://doi.org/10.1109/COMPEM.2019.8778952

2019-01-01

Abstract:Conventional near-field to far-field transformation based on phaseless planar near-field scanning usually requires field magnitude data over two parallel planes in front of the antenna under test (AUT). In this paper, an equivalent dipole array model is established for radiation pattern evaluation based on the phaseless and single-plane near-field scanning. The field magnitude is obtained by near-field scanner. Using an interpolation method, we can obtain a group of interpolated field magnitude under the assumption that field magnitude does not vary dramatically between two adjacent sampling points. Subsequently, an iterative algorithm together with singular value decomposition (SVD) method is performed between measured data and interpolated data for reconstructing the equivalent dipole array. Then, radiation pattern can be calculated by the equivalent sources. A measurement example is given to verify the effectiveness of the proposed method. Reducing a half of sampling points is the major advantage of this method, and it still can establish a valid equivalent source. This method can be regarded as a good compromise between efficiency and accuracy.
Design of Ground Application Software for Movable Spot-beam Antenna of Satellite

Cheng WEI,Hao TIAN,Yang ZHAO,Wen-hao XIANG

DOI: https://doi.org/10.3969/j.issn.1004-731X.2007.11.013

2007-01-01

Abstract:The movable spot-beam antenna of satellite is used widely for its simple structural and high precision. Antenna ground application software is designed for monitoring and controlling the antenna visually by the methods of state variable and modular technology, and implemented two work modes by Visual C++ and OpenGL. In online mode, software solves the remote data for monitoring the antenna state, and can also makeup the commands for changing the direction position; in offline mode, it can verify and simulation the functions of the antenna. Software satisfies the request for application for the use in the test stage of both the electrical and the main satellite.
A Design of GUI Tool Software for Phased Array Antenna Beamforming

Chen Han,Xiongzhi Zhu,Jinling Zhang,Lifei Jia,Zhanqi Zheng,Lifeng Duan

DOI: https://doi.org/10.1109/aces-china56081.2022.10064802

2022-01-01

Abstract:this paper, a tool software for beamforming of phased array antenna is designed. The tool has a clear GUI, visualizes the antenna radiation pattern, supports direct adjustment of the radiation pattern for beamforming, provides an effective solution for the shortcomings of optimization algorithm for beamforming, and can be used as a new beamforming solution.
The Design of Microwave Auto-measurement System Based on the Virtual Instrumental Technology

ZHANG Wei-jun,LIANG Bu-ge,JIAO Guo-dong,YUAN Nai-chang

DOI: https://doi.org/10.3969/j.issn.1001-2486.2005.03.017

2005-01-01

Abstract:AbstrcatUsing the virtual instrumental technology of adopting the soft ware of LabView, and utilizing the multithreading technique, we construct the auto-measurement system for the antenna and RCS based on the instrument and the rotation platform working harmoniously. The design makes the instrument more functional, and improves the automation and efficiency of the fest.
Antenna Measurement in Outdoor Environment Based on a Unmanned Aerial Vehicle

Zhiming Luo,Zhengpeng Wang,Yulei Miao,Haibo Chen

DOI: https://doi.org/10.1109/aces-china56081.2022.10065325

2022-01-01

Abstract:This paper presents an outdoor antenna measurement system based on a Unmanned Aerial Vehicle (UAV). The hardware structure of the system and a data sampling method for the antenna radiation pattern are proposed. The path loss, pointing and polarization errors caused by position errors and attitude of UAV are calibrated through feedback loop. Through the outdoor experiment of measuring the radiation pattern of the S-band standard gain horn antenna at 3.7GHz, it is verified that the repeatability of the system is better than 0.28 dB (root mean square, RMS). This antenna measurement system could be used for over the air (OTA) radio frequency (RF) performance measurement in base station and radar.
High/Low Temperature Space Environment Simulation Measurement and Control System

Dingqi Deng,Jihua Zhang,Fei Gao,Wangkai Liu

DOI: https://doi.org/10.7690/bgzdh.2015.02.020

2015-01-01

Abstract:For the test requirements of the aircraft antenna carry out test under different temperature conditions, design the high/low temperature space environment simulation system. Use image technology, computer technology and control technology and so on, carry out measurement and control system structure design from hardware and software design. Aiming at the difficulties in system designing, discuses key problems of temperature control and switch, serial communication. The practice result shows that the system has fast response speed, control precision and serial communication error code rate meet requirements. And it satisfies data collection and temperature control requirement.
Design and Preliminary Analysis of a Pattern Reconfigurable Terminal MIMO Antenna for Receiving Antenna Selection

Jiawen Sun,Wenhua Chen,Xin Wang,Wanshun Jiang

DOI: https://doi.org/10.1109/icmmt.2012.6230393

2012-01-01

Abstract:A newly-built broadband MIMO measurement platform in indoor environment is constructed. The platform is designed for measuring the S21 parameter between M transmitters and N receivers (M<;=8, N<;=8), which enables us to analyze the capacity of the radio propagation channel. A pattern reconfigurable antenna for receiving antenna selection at 2.48GHz has been designed and evaluated. Comparisons of MIMO systems employing antennas with different selection schemes are presented. The system performances are discussed in terms of channel capacity.
Design and Testing of a Simple, Compact Antenna with Reconfigurable Broadside and Monopole-Like Patterns

Ming-Chun Tang,Yingjie Chen,Xiaoming Chen,Dongmei Mu,Richard Ziolkowski

DOI: https://doi.org/10.1109/LAWP.2020.2981522

IF: 4.2

2020-01-01

IEEE Antennas and Wireless Propagation Letters

Abstract:A compact antenna with broadside and monopole-like pattern reconfigurability is presented. Its radiating elements are linearly polarized and consists of a magnetic dipole and an electric monopole. A capacitively loaded loop and two rectangular strips, one driven and one parasitic, serve as a magnetic near-field resonant parasitic radiator. The broadside pattern is generated by the magnetic radiato...
ATS Design for Antenna Matching Devices

Guo Wanfang,Qin Honglei

DOI: https://doi.org/10.3969/j.issn.1002-7300.2005.03.029

2005-01-01

Abstract:Based on the technology of GPIB and VXI instruments, an integrated design of testing for antenna matching de- vices is presented. An interface adapter is designed. Thus, ATS (automatic testing systerm) for the antenna matching devices can be established by adding the corresponding testing software. Using this system, the efficiency of testing as well as mal- function orientation and diagnosis are enhanced to some extent.
Software Design of Phased Array Antenna Array Testing Platform

万东成,章国宝

DOI: https://doi.org/10.3969/j.issn.1001-182X.2016.03.015

2016-01-01

Abstract:In modern large phased array radar,the number of transmitter and receiver components in the antenna is large. The system test is very cumbersome.In order to simplify the testing process and improve the efficiency of manual test,in the array front and TR components testing process,combining with computer software & hardware technologies,data processing technology,automatic test technology,by means of network communication,a set of antenna array surface general test plat-form is designed in this paper.
Measurement of Time-Domain Antenna array and Result Analysis

Zhang Weijun,Wu Fengtao,Zhang Guangfu,Liang Buge,Yuan Naichang

DOI: https://doi.org/10.16526/j.cnki.11-4762/tp.2005.12.003

2005-01-01

Abstract:Using the time domain antenna array is very helpful for improving the performance of the ultra-wideband radar.It is very necessary to study the law of transmitting and receiving of the antenna array.Using the technology of virtual instrument,adopting the software kit of the LabView,and using the idea of module design,we construct the auto-measurement system for time-domain antenna array based on an oscillograph and a rotation table working harmoniously.Analyzing the test data,and comparing the results with the simulation result from FDTD,we get the valuable conclusions about the time domain antenna array.

Design of a Simple Antenna Pattern Measurement System

The Design of a Simple Millimeter-Wave Antenna Automatic Measurement System

Implementation of A Far-Field Antennas Automation Measurement System

A Simple System for Measuring Antenna Radiation Patterns in the Wi-Fi Band

Design and Implementation of Missile Antenna Cover's Auto-Measurement System

Design and implementation of an antenna measurement system for the mono-pulse radar

Design and implementation of control software for radar antenna performance index test system

A Rapid Calibration and Pattern Test Method for Phased Array Antenna

Antenna Real-Time Measuring System Based on Multithreading Technology

The small antenna design based on RFID

Patch Antenna Radiation Pattern Evaluation Based on Phaseless and Single-Plane Near-Field Scanning

Design of Ground Application Software for Movable Spot-beam Antenna of Satellite

A Design of GUI Tool Software for Phased Array Antenna Beamforming

The Design of Microwave Auto-measurement System Based on the Virtual Instrumental Technology

Antenna Measurement in Outdoor Environment Based on a Unmanned Aerial Vehicle

High/Low Temperature Space Environment Simulation Measurement and Control System

Design and Preliminary Analysis of a Pattern Reconfigurable Terminal MIMO Antenna for Receiving Antenna Selection

Design and Testing of a Simple, Compact Antenna with Reconfigurable Broadside and Monopole-Like Patterns

ATS Design for Antenna Matching Devices

Software Design of Phased Array Antenna Array Testing Platform

Measurement of Time-Domain Antenna array and Result Analysis