Abstract:Boundary Singularity Method (BSM) was used to model Chemical Vapor Infiltration (CVI) in a fibrous preform. Straight, long fibers of varying cross-sectional geometry, representing fibers of a preform, were placed within a domain of a pre-determined size. The preparation of dense fiber-reinforced Silicon-Carbon (SiC) composites was considered as a representative of CVI methodology, where methyl-trichlorosilane (MTS) was used as both the silicon and carbon donor for the silicon carbide matrix. Concentrations of MTS were then set at the domain boundaries, and the domain was gradually infiltrated with MTS as time progressed. The concentration of MTS at the surface of the preform fibers was calculated using the adopted BSM. For quasi-equilibrium considered, the reaction rate at solid surface is equal to the diffusion rate towards the surface. The Robin or third type boundary condition, which is a linear combination of the values of a function and the values of its derivative on the boundary of the domain, are developed and implemented to BSM. From the fibers surface concentrations obtained by BSM, deposition rates were calculated, and the geometry was updated to reflect the fiber growth during the time step, therefore, the fiber size growth and pore filling was modeled over time. The BSM analysis was verified by comparisons to a known analytical solution of concentric cylinders with a concentration set at the outer cylinder and a reaction at the inner. BSM solutions were also compared to experimental data as well as computational results obtained by a Level-Set Method (LSM). Obtained dynamics of pore size and location will help to evaluate quality of material manufactured by CVI. Porosity transients were obtained to show the relation between initial and current porosities as time progresses.

Mamdani Fuzzy System for Isothermal CVI Process of C/C Composites

T-S Fuzzy System for Isothermal CVI Process of C/C Composites

Modeling of isothermal CVI process of C/C composites by fuzzy neural network

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

FUZZY SYSTEM MODEL FOR ISOTHERMAL CHEMICAL VAPOR INFILTRATION PROCESS OF CARBON/CARBON COMPOSITES

Processing of C<i><sub>f</sub></i>/SiC Composites through Two-Channel Temperature-Control CVI: I, Modeling

Modeling for the Fabrication Process of a φ1185 mm C/C Composite Thermal Insulation Tube in an Isothermal Chemical Vapor Infiltration Reactor

Numerical simulation of effects of reactor dimensions on isothermal CVI process of C/SiC composites

Numerical evaluation of effective elastic properties of CVI-C/C composites considering anisotropic matrix

Modeling of Forced Flow-thermal Gradient CVI: Effects of Control Parameters and Processing Schemes on a Densification

NEURO-FUZZY SYSTEM BASED ON GENETIC ALGORITHM FOR ISOTHERMAL CVI PROCESS FOR CARBON/CARBON COMPOSITES

Modeling The Effects Of Reactor Inlet Configuration On Isothermal Cvi Process Of C/Sic Composites

Design of domain-limited CVI reactor for L-shaped C/C structure

Numerical mapping relationship between process parameters and mechanical properties of unidirectional carbon/carbon composites

Preparation and characterization of carbon felt/carbon composites by chemical vapor infiltration process

Computational Study of the Nanoscale Mechanical Properties of C-S-H Composites under Different Temperatures

Probabilistic physics-integrated neural differentiable modeling for isothermal chemical vapor infiltration process

Effect of chemical vapor infiltration on the flexural properties of C/C-SiC composites prepared by the precursor infiltration pyrolysis method

Improved densification of SiC f /SiC composites by microwave-assisted chemical vapor infiltration process based on multifrequency solid-state sources excitation

The Numerical Simulation Research of Internal Curing Process for Fiber Winding Composite Shell

Modeling of Chemical Vapor Infiltration Using Boundary Singularity Method