Abstract:One-step electrodeposition(ED) of Cu(In1-x9 Ga-x)Se-2 (CIGS) thin films on Mo/glass substrates from aqueous solutions containing CuCl2, InCl3, GaCl3, and H2SeO3 was studied. In order to stabilize the solutions, they were buffered using a potassium biphthalate/sulfamic acid mixture giving a bath of pH 2.5. The type of the solutions would influence Ga concentration in the CIGS films. In general, CIGS thin film is called stoichiometric compound when the molar ratio of Cu to In+Ga is 1, and when the ratio is in the range of 0.8-1, it is called near stoichiometric and slightly Cu-poor or In- rich CIGS compound. As-deposited films were near stoichiometric and slightly Cu-poor CIGS precursors with smooth, compact, crack-free surface by the optimization of the solution composition and the deposition condition. The electrodeposition mechanisms of CIGS on Mo substrates were studied by cyclic voltammetry. The results showed that Se4+ was first reduced to Se, and then Cu2+, In3+, and Ga3+ were deposited via the induced co-deposition mechanism at more positive potentials than they were reduced. As-deposited films were selenized and recrystallized at 550 degrees C in Se vapor with a Se source temperature of 280 degrees C, which improved crystal structure of the films and changed little the compositions of ED-CIGS thin films, but resulted in cracking of the films.

Electrodeposition of CuInSe_2 and Cu(In,Ga)Se_2 Thin Films for Solar Cells

Research progress on synthesis of CuIn1-x Gax Se2 nanoparticles

Research progress on synthesis of CuIn 1-xGa xSe 2 nanoparticles

Preparation and Characterization of Electrodeposited-Annealed CuInSe2 Thin Films for Solar Cells

CONTROLLABLE ELECTRODEPOSITION OF CuInSe_2 THIN FILMS FOR SOLAR CELLS

Metal Precursor with Bi-Layer Indium for Cu(In,Ga)Se2 Thin Film Preparation

Research on CuInS2 Thin Films Prepared by One-step Electrodeposition

Preparation and characterization of CuInSe2 thin films derived by electrodeposition process for solar cells

Cu(In, Ga)(S, Se)2 electrodeposition and characterizations using improved electrolytes

Research Development of Cu(In,Ga)Se_2 Based(cigs) Solar Cells

RESERCH DEVELOPMENT OF Cu(In_xGa_(1-x))Se_2 THIN FILM SOLAR CELL ABSORBER MATERIAL

Comparison of the Compositions and Structures of Electrodeposited Cu-Poor and Cu-Rich Cu(In1-Xgax)Se-2 Films Before and after Selenization

Fundamental studies of CuInSe_2 thin films based solar cells

Preparation and Properties of Cuins2 Thin Films by Electrodeposition and Sulfurization

Progress of CuInGaSe2 Thin Film Photovoltaic Cells and Solar Materials

Influence of Cu on Ga diffusion during post-selenizing the electrodeposited Cu/In/Ga metallic precursor process

Properties Of One-Step Electrodeposited Cu(In1-X9 Ga-X)Se-2 Thin Films

Preparation and Properties of CuInxGa1−xSe2thin-film Solar Cell Absorbers from Selenization of Ga-rich Electrodeposited Precursors

Growth and Characterization of Copper Indium Gallium Diselenide Films for Solar Cells Fabrication

Photoelectrochemical Deposition of Cuinse2 Thin Films

Three-step vapor Se/N2/vapor Se reaction of electrodeposited Cu/In/Ga precursor for preparing CuInGaSe2 thin films