Abstract:PurposeWe seek to investigate an optimization-based one-step method for image reconstruction that explicitly compensates for nonlinear spectral response (i.e., the beam-hardening effect) in dual-energy CT, to investigate the feasibility of the one-step method for enabling two dual-energy partial-angular-scan configurations, referred to as the short- and half-scan configurations, on standard CT scanners without involving additional hardware, and to investigate the potential of the short- and half-scan configurations in reducing imaging dose and scan time in a single-kVp-switch full-scan configuration in which two full rotations are made for collection of dual-energy data. MethodsWe use the one-step method to reconstruct images directly from dual-energy data through solving a nonconvex optimization program that specifies the images to be reconstructed in dual-energy CT. Dual-energy full-scan data are generated from numerical phantoms and collected from physical phantoms with the standard single-kVp-switch full-scan configuration, whereas dual-energy short- and half-scan data are extracted from the corresponding full-scan data. Besides visual inspection and profile-plot comparison, the reconstructed images are analyzed also in quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation. ResultsFollowing the performance of a computer-simulation study to verify that the one-step method can reconstruct numerically accurately basis and monochromatic images of numerical phantoms, we reconstruct basis and monochromatic images by using the one-step method from real data of physical phantoms collected with the full-, short-, and half-scan configurations. Subjective inspection based upon visualization and profile-plot comparison reveals that monochromatic images, which are used often in practical applications, reconstructed from the full-, short-, and half-scan data are largely visually comparable except for some differences in texture details. Moreover, quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation indicate that the short- and half-scan configurations yield results in close agreement with the ground-truth information and that of the full-scan configuration. ConclusionsThe one-step method considered can compensate effectively for the nonlinear spectral response in full- and partial-angular-scan dual-energy CT. It can be exploited for enabling partial-angular-scan configurations on standard CT scanner without involving additional hardware. Visual inspection and quantitative studies reveal that, with the one-step method, partial-angular-scan configurations considered can perform at a level comparable to that of the full-scan configuration, thus suggesting the potential of the two partial-angular-scan configurations in reducing imaging dose and scan time in the standard single-kVp-switch full-scan CT in which two full rotations are performed. The work also yields insights into the investigation and design of other nonstandard scan configurations of potential practical significance in dual-energy CT.

Dual-energy CT Imaging Method Using Synchrotron Radiation

An Experimental Study of Dual-Energy CT Imaging Using Synchrotron Radiation

The Application of Dual-energy CT Technique in Electron Density Measurement

Electron density measurement with dual-energy x-ray CT using synchrotron radiation

Experimental Feasibility of Dual-Energy Computed Tomography Based on the Thomson Scattering X-ray Source.

Dual-energy Micro-Focus Computed Tomography Based on the Energy-Angle Correlation of Inverse Compton Scattering Source.

A Computation Method of Dual-Energy X-Ray Imaging

Dual-Energy Cone-Beam CT Using Two Complementary Limited-Angle Scans with A Projection-Consistent Diffusion Model

Implementation of Dual-Energy Technique for Virtual Monochromatic and Linearly Mixed Cbcts

Optimizing twin-beam dual-energy CT reconstruction: Quantitative consistency and stability assessment in reference to 120 kV: An observational study

Single Scan Dual-energy Cone-beam CT Using Static Detector Modulation: A Phantom Study

Dual-Energy CT: New Horizon in Medical Imaging

Dual-energy Cone-Beam Micro-Ct for Animal Imaging: Preliminary Study

Algorithm-enabled single-kVp-switch scan configuration for dual-energy CT

Numerical Simulation for Dual-energy CT Imaging

One-step Iterative Estimation of Effective Atomic Number and Electron Density for Dual Energy CT

A Reconstruction Method for Dual High-Energy CT With MeV X-Rays

Diffusion Model-Based Single-Scan Dual-Energy Cone-Beam CT Using Primary Beam Splitting

Dual Energy CT Imaging in Cone-Beam Micro-Ct for Improved Attenuation Coefficient Measurement

Algorithm-enabled Partial-Angular-scan Configurations for Dual-Energy CT

PET-enabled dual-energy CT: image reconstruction and a proof-of-concept computer simulation study