Abstract:PurposeWe seek to investigate an optimization-based one-step method for image reconstruction that explicitly compensates for nonlinear spectral response (i.e., the beam-hardening effect) in dual-energy CT, to investigate the feasibility of the one-step method for enabling two dual-energy partial-angular-scan configurations, referred to as the short- and half-scan configurations, on standard CT scanners without involving additional hardware, and to investigate the potential of the short- and half-scan configurations in reducing imaging dose and scan time in a single-kVp-switch full-scan configuration in which two full rotations are made for collection of dual-energy data. MethodsWe use the one-step method to reconstruct images directly from dual-energy data through solving a nonconvex optimization program that specifies the images to be reconstructed in dual-energy CT. Dual-energy full-scan data are generated from numerical phantoms and collected from physical phantoms with the standard single-kVp-switch full-scan configuration, whereas dual-energy short- and half-scan data are extracted from the corresponding full-scan data. Besides visual inspection and profile-plot comparison, the reconstructed images are analyzed also in quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation. ResultsFollowing the performance of a computer-simulation study to verify that the one-step method can reconstruct numerically accurately basis and monochromatic images of numerical phantoms, we reconstruct basis and monochromatic images by using the one-step method from real data of physical phantoms collected with the full-, short-, and half-scan configurations. Subjective inspection based upon visualization and profile-plot comparison reveals that monochromatic images, which are used often in practical applications, reconstructed from the full-, short-, and half-scan data are largely visually comparable except for some differences in texture details. Moreover, quantitative studies based upon tasks of linear-attenuation-coefficient and material-concentration estimation and of material differentiation indicate that the short- and half-scan configurations yield results in close agreement with the ground-truth information and that of the full-scan configuration. ConclusionsThe one-step method considered can compensate effectively for the nonlinear spectral response in full- and partial-angular-scan dual-energy CT. It can be exploited for enabling partial-angular-scan configurations on standard CT scanner without involving additional hardware. Visual inspection and quantitative studies reveal that, with the one-step method, partial-angular-scan configurations considered can perform at a level comparable to that of the full-scan configuration, thus suggesting the potential of the two partial-angular-scan configurations in reducing imaging dose and scan time in the standard single-kVp-switch full-scan CT in which two full rotations are performed. The work also yields insights into the investigation and design of other nonstandard scan configurations of potential practical significance in dual-energy CT.

Algorithm-enabled single-kVp-switch scan configuration for dual-energy CT

Algorithm-enabled Partial-Angular-scan Configurations for Dual-Energy CT

Dual-Energy Cone-Beam CT Using Two Complementary Limited-Angle Scans with A Projection-Consistent Diffusion Model

Comparative Study of Dual Energy Cone-Beam CT using a Dual-Layer Detector and kVp Switching for Material Decomposition

Single Scan Dual-energy Cone-beam CT Using Static Detector Modulation: A Phantom Study

Fast kV-switching and dual-layer flat-panel detector enabled cone-beam CT joint spectral imaging

PET-enabled dual-energy CT: image reconstruction and a proof-of-concept computer simulation study

Multienergy CT Acquisition and Reconstruction with a Stepped Tube Potential Scan.

Hepatic dual-contrast CT imaging: slow triple kVp switching CT with CNN-based sinogram completion and material decomposition

Dual-energy CT imaging over non-overlapping, orthogonal arcs of limited-angular ranges

Fast and effective single‐scan dual‐energy cone‐beam CT reconstruction and decomposition denoising based on dual‐energy vectorization

Dual-energy CT Imaging Method Using Synchrotron Radiation

Dual-energy Micro-Focus Computed Tomography Based on the Energy-Angle Correlation of Inverse Compton Scattering Source.

Sequential-Scanning Dual-Energy CT Imaging Using High Temporal Resolution Image Reconstruction and Error-Compensated Material Basis Image Generation

An Iterative Dynamic Dual-Energy CT Model for Multi-Energy CT Imaging

Dual-Energy Algorithms and Postprocessing Techniques

Dual-Energy CT: New Horizon in Medical Imaging

Estimating dual-energy CT imaging from single-energy CT data with material decomposition convolutional neural network

Image reconstruction and scan configurations enabled by optimization-based algorithms in multispectral CT

Dual-energy CT Reconstruction from Dual Quarter Scans

Prior Image Guided Undersampled Dual Energy Reconstruction with Piecewise Polynomial Function Constraint