Abstract:The waste residue (ER) obtained by the mutual treatment of electrolytic manganese residue and red mud. ER is a kind of silicon and aluminum waste residue with low pollution. In order to alleviate the shortage of silicon-aluminum raw materials in ceramic bricks industry. In this paper, ER is used as a part of silicon-aluminum raw material to prepare building ceramic bricks. The results show that the impurity ions (Fe3+, Na+, K+, etc.) in ER can promote the formation of liquid phase during the calcination process. This makes the ceramic bricks can be successfully fired at 1150 °C. The mineral composition of ceramic bricks prepared by ER is anorthite, quartz, corundum, mullite and glass phase, and the corresponding contents are 40.31 wt%, 2.48 wt%, 6.81 wt%, 2.58 wt% and 35.07 wt%, respectively. The layer stacking of plate anorthite is closely combined with the corundum to form a microscopic block. The rod-like mullite is interspersed in the microscopic block to form a skeleton structure. This microstructure makes the mechanical properties of the ceramic bricks superior, and the compressive strength is 138.2 MPa. The sintering process of ceramic bricks prepared by ER can be divided into four stages. Stage 1 (25 °C–200 °C) mainly involved the removal of free water and crystal water and the decomposition of part of AlO(OH) into γ-Al2O3, the corresponding kinetic mechanism is phase boundary chemical second-order reaction mechanism. Stage 2 (200 °C–400 °C) mainly involved the residual AlO(OH) decomposed into γ-Al2O3, the corresponding kinetic mechanism is phase boundary–controlled reaction and one-dimensional movement mechanism. Stage 3 (400 °C–900 °C) mainly involved the γ-Al2O3 transformed into α-Al2O3, CaCO3 and CaSO4 decompose into CaO, and CaO reacts with SiO2 and α-Al2O3 to form (Ca,Na)(Al,Si)4O8 and CaAl2Si2O8, the corresponding kinetic mechanism is random nucleation and growth mechanism. Stage 4 (900 °C–1200 °C) mainly involved the melting of (Ca,Na)(Al,Si)4O8, and the continuous formation of CaAl2Si2O8, Ca(Al, Fe)12O19 and mullite, the corresponding kinetic mechanism is Mampel power law exponential form nucleation reaction mechanism.

Study on Preparation of Bricks with Volcanic Rock and Its Performances

Preparation of Sintered Brick with Aluminum Dross and Optimization of Process Parameters

Study on the performance and reaction mechanism of alkali-activated clay brick with steel slag and fly ash

Study on Preparation of Decarburized Fly Ash-phosphogypsum Autoclaved Brick

Microstructure Evolution and Improved Permeability of Ceramic Waste-Based Bricks

Preparation, characteristics and mechanisms of the composite sintered bricks produced from shale, sewage sludge, coal gangue powder and iron ore tailings

Effect of Control Technology on Properties of Quartz Porous Brick

Research on the Synthesis of Sintered Bricks Using River Sludge for the Resource Utilization

Preparation and Mechanism of the Sintered Bricks Produced from Yellow River Silt and Red Mud.

Analysis on Compressive and Flexural Strength of Unburned Brick with Electrolytic Manganese Slag

Non-clay bricks with high compressive strength made from secondary aluminum dross and waste glass

Influence of Solid Waste Material Content on the Properties of Steel Slag-Waste Clay Brick Ceramic Bricks

Developing fired clay bricks by incorporating scrap incinerated waste and river dredged sediment

Study on preparation of brick blocks by using construction waste and sludge

Effect of clay fraction on the mechanical properties and microstructural characteristics of waste rock fine-based brick

Brick production and characterization containing coal mining waste

Preparation of building ceramic bricks using waste residue obtained by mutual treatment of electrolytic manganese residue and red mud

Evaluation of physical and mechanical properties of fired-clay bricks incorporating both mineral and organic wastes

Preparation process and performance study of desert sand autoclaved bricks

Preparation and Performance of Ceramic Tiles with Steel Slag and Waste Clay Bricks

Utilization of waste phosphogypsum to prepare non-fired bricks by a novel Hydration–Recrystallization process