Abstract:Degumming bast fibers by organic solvents has been a promising method in recent years due to easy recovery and reuse of organic solvents. In this research, the possibility of ramie fiber degumming by glycol and a combination of acetic acid with glycol was studied, in which two steps were involved in the degumming process: distilled water boiling pretreatment and organosolv treatment by a combination of glycol/acetic acid (100/0, 90/10, 80/20, 70/30, 60/40, 50/50). Results displayed that the pretreatment could remove 6.99% of hemicellulose, 0.59% of lignin and 36.26% of other gums compared with raw ramie. While with organosolv treatment (130 °C, 6 h), fibers treated by glycol/acetic acid (50/50) had the best effect of removing gums. The hemicellulose and lignin content of fibers reduced by 44.81% and 54.12%, respectively (compared with raw ramie), while the residual gum content still failed to meet the requirements of spinning process. Besides, the tenacity of glycol/acetic acid treated fibers was lower than that of only glycol treated fibers (4.67 cN/dtex). Considering that the addition of acid could cause a decrease in fiber tenacity, the step of organosolv (only glycol) treatment was optimized by altering the degumming condition. The tenacity, linear density, non-cellulosic component ratio of fibers treated with the optimized condition (200 °C, 80 min) were 6.53 cN/dtex, 6.06 dtex, 5.78%, respectively, which met the needs of industrial production. Compared with the organosolv treated fibers, these properties of fibers with traditional alkaline treatment were better, but the yield (62.4%) was much lower than that of fibers treated with glycol in two degumming condition (77–82%). Considering impressive properties of the treated ramie, the method of organosolv degumming with high degumming efficiency and environmental protection would bring an innovative thought for natural fiber isolation.Graphic abstract

Application of New Amylase DMA-160 to Ramie Desizing Process

On the Flameproof Treatment of Ramie Fabrics Using a Spray-Assisted Layer-by-layer Technique

Optimization of Alkali Treatment Conditions of Ramie Fabrics Using Box–Behnken Method

Application of Immobilized Cellulases on Ramie Fabric Finishing

A high-efficiency and eco-friendly degumming process for ramie fibers

Visual degumming process of ramie fiber using a microbial consortium RAMCD407

Optimization of enzymatic ramie degumming using thermoalkaliphilic xylanase from Bacillus halodurans CM1 and a commercial pectinase

Study on treatment of DMA containing wastewater with ion exchange resin

Pretreatment Process of Polylactic Acid / Richcel / Bamboo Fiber Blended Fabric

Evaluation of Aqueous Ammonia Degumming of Ramie Fiber and Recyclability of Black Liquor

Process optimization and comprehensive utilization of recyclable deep eutectic solvent for the production of ramie cellulose fibers

Improved reactive dye fixation on ramie fiber in liquid ammonia and optimization of fixation parameters using the Taguchi approach

Engineering of a Bacillus subtilis Strain Deficient in Cellulase: Application in Degumming of Ramie

Study on the performance of ramie fiber modified with ethylenediamine

One bath pretreatment of PLA/Richcel/bamboo fiber blended fabric

Ramie-degumming methodologies: A short review

Isolation and characterization of cellulosic fibers from ramie using organosolv degumming process

Ultrasonic Effect on the Desizing Efficiency of Α-Amylase on Starch-Sized Cotton Fabrics

One-step extraction of ramie cellulose fibers and reutilization of degumming solution

Improvement on Thermostability of Pectate Lyase and Its Potential Application to Ramie Degumming

An effective degumming enzyme from Bacillus sp. Y1 and synergistic action of hydrogen peroxide and protease on enzymatic degumming of ramie fibers