Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Advances in Hydrophilization of Polypropylene Microporous Membrane

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Hydrophilization of Polymeric UF/MF Membranes:From PEGylation to Ionization

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

Porous poly(vinylidene fluoride) membrane modified with hyperbranched poly(amine-ester)

PROGRESS IN RESEARCHES ON HYDROPHILIZATION OF MICROFILTRATION MEMBRANE

Advances on Hydrophilic Modification of Polytetrafluoroethylene Porous Membrane

Surface Hydrophilisation and Antibacterial Functionalisation for Microporous Polypropylene Membranes

Surface Engineering of Microporous Polypropylene Membrane for Antifouling: A Mini-Review

Membranes of poly (vinyl butyral) (PVB) or cationic PVB (CPVB) blended with poly (vinylidene fluoride) (PVDF) prepared by a nonsolvent induced phase separation method: Miscibility and hydrophilicity

Application of polyethylene oxide and its derivatives in hydrophilic modification of ultrafiltration membranes

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Polypropylene Hollow-Fiber Membrane Made Using the Dissolution-Induced Pores Method

Surface modification of polypropylene microporous membrane via self-assembly and UV-crosslinking of lecithin and analysis of surface properties

Progresses in the Modification and Application of Poly(vinyl Alcohol) Membrane

Surface Hydrophilization of Microporous Polypropylene Membrane by the Interfacial Crosslinking of Polyethylenimine

Preparation of Polypropylene Microfiltration Membranes Via Thermally Induced (solid–liquid or Liquid–liquid) Phase Separation Method

Hydrophilic Microporous Polymer Membranes: Synthesis And Applications

Research review on polypropylene microporous membrane

Preparation of hydrophilic polypropylene hollow fiber membranes by UV modification