Abstract:This paper investigates the clutch control problem for automotive transmission systems. This paper focuses on the pressure tracking control for a wet clutch, which has a much shorter stroke and asks for a more precise position and pressure regulation. The system dynamics are highly nonlinear, and the developed model includes unmodeled dynamics and parameter uncertainties. All these factors will influence the closed-loop system performance if not considered carefully during the control design, which makes the control synthesis for clutch systems challenging. Compared with the existing sliding-mode control (SMC) method, an improved method based on nonlinear sliding mode is presented in this paper to further improve the convergence rate and tracking precision of the closed-loop clutch system. This controller ensures that the pressure tracking error not only reaches the sliding manifold in finite time but converges to the equilibrium point in finite time as well. Moreover, considering the chattering phenomenon caused by high switching gains, a composite terminal SMC (TSMC) method based on uncertainty observer is proposed to reduce chattering. Using an extended state observer (ESO) technique, an uncertainty observer is designed for estimating the model uncertainties of pressure dynamics, pressure-reducing-valve flow dynamics, and estimation error of piston displacement. Then, a feedforward compensation term is combined with the terminal-sliding-mode feedback control. Thus, the composite terminal-sliding-mode controller may take smaller control gains for the whole pressure tracking procedure without sacrificing uncertainty compensation performance. Experimental results based on an xPC Target platform of the clutch system are provided to show the superiority of the proposed methods.

Self-adaptive Correction of Clutch Control with Proportional Valve

Single neuron adaptive PID control for hydro-viscous drive clutch

New Design of the Control System for Hydro-Viscous Clutch

Compound Sliding Mode Motion Trajectory Tracking Control of an Electro-Pneumatic Clutch Actuator While Maximizing Its Stiffness

The Design of Low Cost Valve-and-pump Compounded Pressure Control System for the Hydro Viscous Clutch

Simultaneous Control of Motion and Maximized Stiffness for an Electro-Pneumatic Clutch Actuator Based on Pressure Observers

Hydraulic-feedback Proportional Valve Design for Construction Machinery

Adaptive Robust Control of a High-Response Dual Proportional Solenoid Valve with Flow Force Compensation

Sliding Mode Control in Position Control for Asymmetrical Hydraulic Cylinder with Chambers Connected

Model-based Trajectory Tracking Control for an Electrohydraulic Lifting System with Valve Compensation Strategy

Analysis and optimization of a hydraulic-feedback proportional throttlecartridge valve

Proportional Pressure Control Of Water Hydraulic System For Water-Assisted Injection Molding: Modeling And Simulation

Hierarchical Control of Starting Process for Wet Dual Clutch Transmission Based on Direct-Drive Pump-Controlled Hydraulic Actuator

Digital pressure compensation methop for anti disturbance in electrohydraulic proportional velocity control system

Modeling and Adaptive Control of the Electro-Hydraulic Braking System of Low-Floor Vehicle

Control Performance Improvement of Hydro-Viscous Clutch Based on Fuzzy-PID Controller

On the hysteresis characteristics and compensation control strategy of a pneumatic hydrodynamic retarder

RESEARCH ON COMPENSATION FOR VARIABLE DEAD-ZONE CHARACTERISTIC OF ELECTRO-HYDRAULIC PROPORTIONAL DIRECTION VALVE IN POSITION CONTROL

An Adaptive Robust Controller for Hydraulic Robotic Manipulators with a Flow-Mapping Compensator

A Modified Predictive Functional Control with Sliding Mode Observer for Automated Dry Clutch Control of Vehicle

Design and Implementation of Clutch Control for Automotive Transmissions Using Terminal-Sliding-Mode Control and Uncertainty Observer