A View of Etherification of Hemicelluloses

Chuanfu Liu

2007-01-01

Abstract:in this paper the chemical constituents and the structural characterization of hemicelluloses were introduced simply.Simultaneously,the etherifying modification of hemicelluloses was summarized in latest decade years,such as carboxymethylation,methylation,and quaternization and so like.In the end,the new progress of etherifying modification of hemicelluloses was mentioned.

What problem does this paper attempt to address?

Mechanistic Investigation of Cellulose Formate to 5-Hydroxymethylfurfural Conversion in DMSO-H2O

Shen Zhang,Caidi Jin,Kuichuan Sheng,Ximing Zhang

DOI: https://doi.org/10.1016/j.molliq.2022.118471

IF: 6

2022-01-01

Journal of Molecular Liquids

Abstract:5-hydroxymethylfurfural (HMF) primary can be synthesized from monosaccharides including glucose and fructose, cost is one of barriers to realize HMF large-scale production. In this study, a high HMF yield of 69.6 mol% was obtained at 180. for 5 min using biomass derived cellulose formate as reactant, which was prepared by formylation of cellulose using recyclable formic acid, and sequentially catalyzed by hydrochloric acid (HCl) and aluminum chloride (AlCl3) in dimethyl sulfoxide (DMSO) and H2O system. To investigate the effect of cosolvents and formyl groups on the cellulose formate conversion, kinetics analysis and molecular dynamics simulations were conducted. Reaction kinetics study shows that the rate constant of hydrolysis of cellulose formate to glucose increased by almost three times in DMSO-H2O and the reaction rates' constants of glucose, fructose and HMF to humins decreased with the presence of DMSO. Molecular dynamics simulations show that formyl group and DMSO increased its hydrophilicity around the reactive hydroxyl group on the carbon ring and steric hindrance of formyl group affect the distribution of water molecular and DMSO molecular around formylated glucose, resulting in facilitating the formation of a precursor to fructose and inhibiting the formation of humins during formylated glucose conversion. (C) 2022 Published by Elsevier B.V.
One-pot Conversion of Cellulose to HMF under Mild Conditions Through Decrystallization and Dehydration in Dimethyl Sulfoxide/tetraethylammonium Chloride

Qinrui Du,Xusheng Guo,Haoxiang Zhu,Youwei Cheng,Lijun Wang,Xi Li

DOI: https://doi.org/10.1016/j.cej.2023.146217

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:As a crucial bio-based platform chemical, the production of 5-hydroxymethylfurfural (HMF) from the abundant substrate cellulose has garnered significant attention. However, tedious reaction steps are inevitable because of the complex tandem conversions of dissolution, hydrolysis, and dehydration. Furthermore, due to the ultralow solubility of cellulose, harsh reaction conditions are inevitable, which can exacerbate HMF degradation. To this end, we investigated the structural changes in microcrystalline cellulose (MCC) after its dissolution and regeneration in various dimethyl sulfoxide (DMSO)/deep eutectic solvents (DESs) to clarify the mechanisms underlying its dissolution. The results revealed that the highly crystalline cellulose I in MCC was converted into amorphous cellulose II after treatment with DMSO/tetraethylammonium chloride (TEAC), which led to the complete dissolution of MCC. Accordingly, a dissolution-catalysis coupling reaction strategy was proposed for converting MCC to HMF via a one-pot method in DMSO/TEAC, simultaneously reducing the number of steps necessary for the reaction and achieving mild reaction conditions. In addition, the pathway for the one-pot reaction was clarified by analyzing the intermediate yields. The combination of AlCl3 as a catalyst and DMSO/ TEAC resulted in a notable MCC conversion of 93.3 wt% and a high HMF yield of 53.1%. Remarkably, the reaction conditions employed in this study (130 degrees C, 1 h) were milder in terms of shorter reaction times and lower temperatures than those reported in most current literature. This was attributed to the complete dissolution of MCC resulting from decrystallization. Therefore, the proposed reaction strategy enabled the efficient production of HMF from cellulose.
Selective 5-hydroxymethylfurfural production from cellulose formate in DMSO-H2O media

Caidi Jin,Ning Xiang,Xiao Zhu,E. Shuang,Kuichuan Sheng,Ximing Zhang

DOI: https://doi.org/10.1016/j.apcatb.2020.119799

2021-01-01

Abstract:5-hydroxymethylfurfural (HMF) can be widely converted into value-added chemicals and fuels production. Herein, we reported a sustainable and efficient approach for synthesizing HMF directly from cellulose. Facile formylation of cellulose with green and recyclable formic acid was developed for cellulose formate (CF) production. CF with special net-like structure and high degree of formyl substitution was prepared. The resultant CF exhibited excellent catalytic conversion and selectivity for HMF production comparable to monomeric glucose as reactant in dimethyl sulfoxide (DMSO)-H2O media. In our work, we presented molecular dynamics simulations to elaborate the preferential coordination of DMSO around formyl group, which promoted the solvation of formylated substrate in DMSO-H2O mixture, and the HMF yielded could be protected by DMSO without further degradation to levulinic acid or humins.
The Study of Separation and Thermodynamics of Adsorption of the Enantiomers of Ethofumasate on A Modified Cellulose

Xuejun Zhang,Baochun Shen,Juanjuan Chen,Beijia Xu,Xiuzhu Xu

DOI: https://doi.org/10.1080/00032710600669341

2006-01-01

Analytical Letters

Abstract:Cellulose and cellulose derivatives are biopolymers that are often used as stationary phases for the separation of enantiomers. Describing the mechanism of such separations is a difficult task due to the complexity of these phases. In the present study, direct enantiomeric resolution of ethofumesate has been achieved, using hexane as the mobile phase with various alcoholic modifiers on cellulose tri(3,5-dimethylphenylcarbamate) chiral stationary phase (CDMPC CSP). The influence of the mobile phase composition and the column temperature on the chiral separation was studied. It was found that at a constant temperature and within a certain range of alcohol modifier concentration, the conformation of the polymeric phase, and the selective adsorption sites were not affected by alcohol modifier concentration. The type and the concentration of the alcoholic modifiers influenced the retention factor and the separation factor. Ethofumesate gained the best enantioseparation using sec-butanol as alcoholic modifier at 25 degrees C with alpha-value 1.70. And the separation factor decreased with the increase of the column temperature. The van't Hoff plots were linear (R-2 > 0.96) for ethofumesate from 25 degrees C to 50 degrees C. That showed the enantioselective interactions do not change over the temperature range studied. Furthermore the values of Delta H degrees and Delta S degrees were both negative, which indicated an enthalpy-driven separation. And the possible chiral recognition mechanism of the analyte and CDMPC was discussed. It was found that hydrogen bonding plays an important role on enantioseparation of CDMPC CSP. The inclusion and fitness of solute shape in the chiral cavity significantly contributed to the enantioseparation of solute.
Synthesis of cationic hemicellulosic derivatives with a low degree of substitution in dimethyl sulfoxide media

J. L. Ren,F. Peng,R. C. Sun,C. F. Liu,Z. N. Cao,W. Luo,J. N. Tang

DOI: https://doi.org/10.1002/app.28256

IF: 3

2008-01-01

Journal of Applied Polymer Science

Abstract:Abstract A series of water‐soluble cationic 2‐hydroxylpropyltrimethylammonium hemicellulosic derivatives with low average degrees of substitution (DS's) were prepared by the incorporation of the cationic moiety 2,3‐epoxypropyltrimethylammonium chloride (ETA) onto the backbone of hemicelluloses in the presence of NaOH as a nucleophilic catalyst in homogeneous dimethyl sulfoxide (DMSO) media. The dependence of the homogeneous reaction on the different affecting factors was investigated. The average DS was calculated from the N/C ratio in the products and from the weight gain. The degree of substitution determined by the nitrogen content (DS N ) values up to 0.25 in a one‐step synthesis of the etherified hemicelluloses could be controlled by the adjustment of the amount of solvent used and the molar ratio of NaOH or ETA to the anhydromonomer units in the hemicelluloses. The structure of the cationic hemicellulosic derivatives formed was determined by Fourier transform infrared spectroscopy and further confirmed with solution‐state 13 C‐NMR spectroscopy. In comparison, no significant degradation of the hemicellulosic derivatives occurred during the etherification of the polymers in the homogeneous DMSO system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008

polymer science
Valorization of industrial xylan-rich hemicelluloses into water-soluble derivatives by in-situ acetylation in EmimAc ionic liquid

Ruonan Zhu,Xin Liu,Lijun Li,Qi Wang,Qiang Zhao,Shijie Liu,Wenjun Feng,Feng Xu,Xueming Zhang

DOI: https://doi.org/10.1016/j.ijbiomac.2020.06.289

IF: 8.2

2020-11-01

International Journal of Biological Macromolecules

Abstract:In this study, aimed at valorization of industrial xylan-rich hemicelluloses (a by-product of dissolving pulp process), water-soluble hemicelluloses were fabricated with mild acetylation in 1-ethyl-3-methylimidazolium acetate ionic liquid (EmimAc) and dichloroacetyl chloride (Cl2AcCl) system by a facile and novel method. The structure of the acetylated hemicelluloses was characterized by FT-IR and NMR spectra. The resultant modified products could fully dissolve in water with the degree of substitution (DS) valued between 0.17 and 0.37. Structural characterization indicated that the modified hemicelluloses were chiefly composed of the (1 → 4)-linked β-D-Xylp backbone with hydroxyl or -COCH3 linked to O-2 and O-3 of the Xylp units. Moreover, the mild acetylation was achieved by one-pot method, in which the hemicelluloses reacted with mixed anhydride produced between EmimAc and Cl2AcCl rather than Cl2AcCl. Rheological behavior measurements revealed that acetylated hemicelluloses solutions showed shear-thinning behavior and indicated lower viscosity compared with those of the referenced hemicelluloses. The excellent water-solubility of industrial hemicelluloses would widen its application field and be easier for its conversion into desired chemicals.

polymer science,biochemistry & molecular biology,chemistry, applied
Long-term consequences of treatment interruptions in chronically HIV-1-infected patients.

E. Wolf,C. Hoffmann,M. Procaccianti,F. Mosthaf,E. Gersbacher,A. Ulmer,M. Karwat,J. Brust,D. Schuster,E. Jaegel-Guedes,H. Jaeger

IF: 4.981

2005-02-28

European Journal of Medical Research

Abstract:OBJECTIVE To evaluate the long-term effects of antiretroviral treatment (ART) interruptions on metabolic, immunological, virological and clinical outcomes in chronically HIV-1 infected patients. METHODS Multi-centric, prospective, controlled 24-month cohort study in HIV-1 infected patients interrupting ART once or several times and for at least two weeks. Patients were compared to a frequency-matched control group continuing on ART. RESULTS A total of 399 HIV-1 infected patients were included, among them 133 patients with treatment interruption (TI) and 266 control patients. Baseline characteristics were well matched. Median baseline CD4 cell count was 379/microl in TI-patients and 410/microl in control patients (p = ns). Median duration of the first TI was 1.1 months, and 37 % of patients had two or further TI's. Whereas CD4 cell count in control patients had increased significantly by a median of 67/microl at month 24 (p<0.0001), median CD4 cell count at month 24 in the TI-patients did not differ significantly from baseline. However, two-year AIDS-free survival was not significantly different between TI- and control patients. Liver enzymes and blood lipids improved significantly during TI. CONCLUSION TI was associated with a significant immunological disadvantage at 24-month follow-up compared to continued ART. In this relatively immunocompetent cohort, however, TI's did not lead to an increased risk of disease progression within two years of follow-up.
Reactive and Mechanistic Insights into the Acid-Catalyzed Conversion of Concentrated C 5 /C 6 Sugars in Ethylene Glycol

Hui Yang,Chaonan Tao,Lincai Peng,Junhua Zhang,Liang He,Huai Liu

DOI: https://doi.org/10.1021/acssuschemeng.1c07807

2022-01-21

Abstract:It remains a challenging task for the efficient conversion of carbohydrates to value-added chemicals at concentrated feedstock solution. In this contribution, the acid-catalyzed processing of high-concentration C5/C6 sugars (180 g/L) in the ethylene glycol (EG) solvent system was investigated, and prominent discrepancy was noticed between C5 and C6 sugars. A large amount of liquefied products was achieved in the concentrated C6 sugars EG solution, whereas the main products in the case of C5 sugars were found to be solid humins. The reaction mechanism studies revealed that EG can shelter fructose and reaction intermediates (5-hydroxymethylfurfural and levulinic acid) from the cross-polymerization and self-etherification reactions, thereby reducing the generation of solid humins during the fructose liquidation process. However, in the case of xylose, the copolymerization between EG and furfural (FF) generates a solid resin, thus rendering a high solid product yield. Moreover, the produced FF–EG resin was found to be a polymer with high molecular weight formed by connecting the furan ring and the alkyl structure through an ether bond. This finding provides insights into the acid-catalyzed conversion of concentrated C5/C6 sugars in EG, facilitating rationally designed processes for the valorization of concentrated carbohydrates.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Modification methods’ effects on the characteristics of carboxylated cellulose fibers: Carboxyl group introduction method versus physical properties

Jian Wang,Yubo Wang,Zetan Liu,Xinyi Shao,Yuxuan Lin,Wenbao Song,Dehua Xu,Yifei Gao,Jialan Han

DOI: https://doi.org/10.15376/biores.19.1.1590-1601

2024-01-22

BioResources

Abstract:Cotton fibers were modified by TEMPO oxidation, sodium periodate oxidation, and sodium chloroacetate etherification to obtain carboxylated cellulose fibers with similar carboxyl content (about 70 mmol/100 g). The characteristics of carboxylated cellulose fibers were analyzed by comparing the morphology, chemical structure, crystallinity, carboxyl content, yield, water retention value, degree of polymerization (DP), and cost. The results showed that etherification and oxidation are both important ways to introduce carboxyl groups into the molecular structure of cellulose. When the carboxyl group with similar content is introduced into cellulose, the three modification methods will encourage a certain degree of cellulose degradation. TEMPO oxidation and sodium periodate oxidation will degrade cellulose more obviously, whereas chloroacetate etherification can obtain a higher yield, DP, and lower cost.

materials science, paper & wood
Hemicellulose and unlocking potential for sustainable applications in biomedical, packaging, and material sciences: A narrative review

Ying He,Yongqing Liu,Min Zhang

DOI: https://doi.org/10.1016/j.ijbiomac.2024.135657

2024-09-18

Abstract:Hemicellulose, a complex polysaccharide abundantly found in plant cell walls, has garnered significant attention for its versatile applications in various fields including biomedical, food packaging, environmental, and material sciences. This review systematically explores the composition, extraction methods, and diverse applications of hemicellulose-derived materials. Various extraction techniques such as organic acid, organic base, enzyme-assisted, and hydrothermal methods are discussed in detail, highlighting their efficacy and potential drawbacks. The applications of hemicellulose encompass biodegradable films, edible coatings, advanced hydrogels, and emulsion stabilizers, each offering unique properties suitable for different industrial needs. Current challenges in hemicellulose research include extraction efficiency, scalability of production processes, and optimization of material properties. Opportunities for future research are outlined, emphasizing the exploration of new applications and interdisciplinary approaches to harness the full potential of hemicellulose. This comprehensive review aims to provide valuable insights for researchers and industry professionals interested in utilizing hemicellulose as a sustainable and functional biomaterial.
Progress, Challenge and Perspective of Fabricating Cellulose

Haiyu Qiao,Maoyuan Li,Chuanyang Wang,Yun Zhang,Huamin Zhou

DOI: https://doi.org/10.1002/marc.202200208

IF: 5.006

2022-07-13

Macromolecular Rapid Communications

Abstract:Cellulose as the most abundant biopolymers on Earth, presents appealing performance in mechanical properties, thermal management, and versatile functionalization. The development of fabrication methods closely relates to enrich its functionality and reduce manufacture cost. However, cellulose is hard to be dissolved by most common solvents or melt due to its recalcitrant property. Herein, the recent progress of fabricating cellulose is summarized. First, the unique hierarchical structure of cellulose is fully investigated and the resulted processability is highlighted in directions of down to nanocellulose, dissolution, and thermoplastic processing. Then, the reported fabrication methods are summarized in three aspects: (1) self‐assembly from nano/micro cellulose suspensions, especially the self‐assembly of cellulose nanocrystals; (2) dissolution‐regeneration‐drying, covering spinning and solvent infusion processing; and (3) thermoplastic processing, focusing on analysis of the setup and the morphology changes of the prepared products. In each aspect, the flowchart of the fabrication process, the behind mechanism, fabricated products, and effects of processing parameters are explored. Finally, this review provides a perspective on the further direction of fabricating cellulose, especially the challenges toward mass production of cellulose. This article is protected by copyright. All rights reserved

polymer science
Revisiting various mechanistic approaches for cellulose dissolution in different solvent systems: A comprehensive review

Haq Nawaz,Aiyong He,Zhen Wu,Xiaoyu Wang,Yetao Jiang,Aman Ullah,Feng Xu,Fengwei Xie

DOI: https://doi.org/10.1016/j.ijbiomac.2024.133012

IF: 8.2

2024-06-15

International Journal of Biological Macromolecules

Abstract:The process of dissolving cellulose is a pivotal step in transforming it into functional, value-added materials, necessitating a thorough comprehension of the underlying mechanisms to refine its advanced processing. This article reviews cellulose dissolution using various solvent systems, along with an in-depth exploration of the associated dissolution mechanisms. The efficacy of different solvents, including aqueous solvents, organic solvents, ionic liquids, hybrid ionic liquid/cosolvent systems, and deep eutectic solvents, in dissolving cellulose is scrutinized, and their limitations and advantages are highlighted. In addition, this review methodically outlines the mechanisms at play within these various solvent systems and the factors influencing cellulose solubility. Conclusions drawn highlight the integral roles of the degree of polymerization, crystallinity, particle size, the type and sizes of cations and anions, alkyl chain length, ionic liquid/cosolvent ratio, viscosity, solvent acidity, basicity, and hydrophobic interactions in the dissolution process. This comprehensive review aims to provide valuable insights for researchers investigating biopolymer dissolution in a broader context, thereby paving the way for broader applications and innovations of these solvent systems.

polymer science,biochemistry & molecular biology,chemistry, applied
Preparation, compatibility and structure of acetylated cellulose/lyocell composite fiber

Huang, Qing

DOI: https://doi.org/10.1007/s10570-024-05982-x

IF: 6.123

2024-08-25

Cellulose

Abstract:The study investigated the structures and properties of lyocell composite fibers with acetylated cellulose with varying relative acetylation substitution degrees (RDS). During pretreatment with NaOH/ethanol solution, some acetyl groups in the acetylated cellulose were hydrolyzed, leading to improve solubility in N -methylmorpholine- N -oxide (NMMO). The RDS was utilized to quantify the content of acetyl groups and acetylated cellulose with RDS between 0.516 ~ 0.571 that could dissolve in NMMO completely. The compatibility between cellulose and acetylated cellulose, with RDS values of 0.516, 0.543 and 0.571 respectively, was demonstrated through rheological and contact angle tests. Although the addition of acetylated cellulose did not change the crystalline structure and comprehensive performance of the composite fiber, it mainly disturbed molecular orientation of amorphous region, crystallinity and grain size. Besides the strengthening of hydrogen bonding between the two components, and the transverse connection between the aggregates were enhanced, thus reducing fibrillation. This paper provides a green modification approach that can be scaled up for industrial application, aiming to mitigated fibrillation issues in lyocell fibers.

materials science, textiles,polymer science, paper & wood
Synthesis of hydroxyethyl cationic cellulose ether

陈殷虎,李鹏飞,胡志勇,王文生,曹端林

DOI: https://doi.org/10.3969/j.issn.1008-1100.2012.05.014

2012-01-01

Abstract:Hydroxyethyl cellulose （HEC） and 2-chloro-4,6-di （N, N-dimethyi-N-benzy[-i,3- propanedia- mine） -1, 3, 5-triazine （BT） were respectively used as the material and the modifier to prepare quaternary am- monium hydroxyethyl cationic cellulose ether, and the effects factors in the preparation were analyzed. The results show that in isopropanol medium with a HEC/ET molar ratio of 1.5 ： 1, cationic cellulose ether with a degree of substitution （DS） of 0.24 can be obtained at 95℃ after treatment for 5 h.
Hydrogen-bonded Thin Films of Cellulose Ethers and Poly(acrylic Acid).

Xuejian Zhang,Feng Ling,Qian Yuan,Liping Zhu,Chunyan Wang,Shuguang Yang

DOI: https://doi.org/10.1016/j.carbpol.2019.03.066

IF: 10.723

2019-01-01

Carbohydrate Polymers

Abstract:Etherification of cellulose can get a series of water soluble derivatives, which can form hydrogen-bonded polymer complex with poly(acrylic acid) (PAA). Three cellulose ethers hydroxyethyl cellulose (HEC), hydroxypropyl cellulose (HPC) and methyl cellulose (MC) are LbL assembled with PAA to fabricate thin films. The hydrogen bonding of the films is characterized with FT-IR. The film growth behaviors are monitored by a quartz crystal microbalance (QCM) and a spectroscopic interferometer, which shows a different growth rate for different system and a strong dependence on pH values. The stability of the films can be increased by heat treatment. Once the cross-linked structure is formed, and the dissolution of film can be prevented even in the high pH value. In addition, the films show good water adsorption ability from environment. Owing to pH responsive behavior and good water adsorption, CE/PAA films can be explored for various applications, especially for biomedical application.
RETRACTED: 2D NMR Assisted Structure Elucidation of Three Cyanoethylated Cellulose Derivatives and Correlated with Their Properties

Yan Zhang,Xiaofei Shen,Hao Qian,Lei Song,Kaiyun Xie,Mingtao Zhang,Huiqing Wang

DOI: https://doi.org/10.1016/j.carres.2019.107861

IF: 2.975

2020-01-01

Carbohydrate Research

Abstract:Three cellulose derivatives CEC, CEHEC, and CEGEC prepared by cyanoethylation of cellulose, hydroxyethyl cellulose (HEC), and glycerol ether cellulose (GEC), respectively, with similar degrees of substitution, exhibited different properties involving their dielectric application. But their structures were hard to distinguish by FTIR, 1H NMR, or 13C NMR spectroscopy. Here, 2D NMR techniques (COSY, HSQC) assisted by partial hydrolysis and full acetylation were applied and demonstrated to be useful for structural elucidation, differentiated their peaks on 2D NMR map. Furthermore, GPC-MALLS revealed that CEHEC has highest branching ratio, while CEC was strictly linear with similar molecular weights. Branching CEHEC exhibited a lowest Tg, while CEGEC showed better dielectric properties due to the relative mobility of the cyano groups at the end of the glycerol moieties. So this work open the way of exploring structure of carbohydrate polymer derivatives assisting by 2D NMR techniques COSY and HSQC.
Renewable hemicellulose-based materials for value-added applications

Guangfu Liao,Enhui Sun,E B Gueguim Kana,Hongying Huang,Isaac A Sanusi,Ping Qu,Hongmei Jin,Jun Liu,Li Shuai

DOI: https://doi.org/10.1016/j.carbpol.2024.122351

2024-10-01

Abstract:The importance of renewable resources and environmentally friendly materials has grown globally in recent time. Hemicellulose is renewable lignocellulosic materials that have been the subject of substantial valorisation research. Due to its distinctive benefits, including its wide availability, low cost, renewability, biodegradability, simplicity of chemical modification, etc., it has attracted increasing interest in a number of value-added fields. In this review, a systematic summarizes of the structure, extraction method, and characterization technique for hemicellulose-based materials was carried out. Also, their most current developments in a variety of value-added adsorbents, biomedical, energy-related, 3D-printed materials, sensors, food packaging applications were discussed. Additionally, the most recent challenges and prospects of hemicellulose-based materials are emphasized and examined in-depth. It is anticipated that in the near future, persistent scientific efforts will enable the renewable hemicellulose-based products to achieve practical applications.
Barrier Film of Etherified Hemicellulose from Single-Step Synthesis

Hui Shao,Yuelong Zhao,Hui Sun,Biao Yang,Baomin Fan,Huijuan Zhang,Yunxuan Weng

DOI: https://doi.org/10.3390/polym12102199

IF: 5

2020-09-25

Polymers

Abstract:Hemicellulose with good biodegradability and low oxygen permeability shows great potential in food packaging. However, its strong hydrophilicity leads to its poor moisture resistance, which hinders its wider application. In this paper, a near-hydrophobic hemicellulose was obtained by using single-step synthesis from poplar powder via etherification modification with epoxy chloropropane. This proposed approach has the advantage of avoiding the destruction of hemicellulose structure by secondary alkali-hydrolysis, which was what usually occurred in traditional etherification procedures. The feasibility of using epoxy chloropropane as an alkylation reagent to etherify hemicellulose was confirmed, and the reaction mechanism was elucidated. Contact angle test, thermogravimetric analysis, oxygen transmittance test, and infrared spectrum analysis showed that the barrier property and thermal stability of etherified hemicellulose films have been significantly improved. At an epoxy chloropropane/wood powder ratio (volume/weight) of 2/3 (mL/g), the epoxy hemicellulose films contained the most epoxy groups and displayed the best performance, i.e., tensile strength of 14.6 MPa, surface contact angle of 71.7° and oxygen transmission coefficient of 1.9 (cm3·μm)/(m2·d·kPa), showing great promise as barrier film in food-packaging.

polymer science
Carboxymethyl Xylan - Control of Properties by Synthesis

Katrin Petzold,Katrin Schwikal,Wolfgang Günther,Thomas Heinze

DOI: https://doi.org/10.1002/masy.200551404

2005-12-01

Macromolecular Symposia

Abstract:The hemicellulose xylan is a polysaccharide that occurs in nature in enormous amount in various one year‐ and perennial plants having different structures and molecular masses. Versatile ways to generate bio‐based functional polymers result from the chemical modification of this biopolymer. In our research, xylans from various resources like birch‐, beech‐, and eucalyptus wood and from oat husk, rye bran, and corn cob were used to investigate the important method of carboxymethylation in detail. Different activation procedures were elaborated to synthesize carboxymethyl xylan. One step reactions lead to products with a degree of substitution (DS) from 0.13 to 1.22 in dependence on the molar ratio of anhydroxylose unit (AXU) to reagent. Two step syntheses yielded DS values up to 1.65. Carboxymethyl xylans are water soluble at a DS of 0.3. The solutions have different clearness depending on the provenience. NMR spectroscopy and HPL chromatography were applied to characterize the carboxymethyl xylans in detail.
A new recognition of the binding of cellulose fibrils in papermaking by probing interaction between nanocellulose and cationic hemicellulose

Xingyu Lan,Shiyu Fu,Yi Kong

DOI: https://doi.org/10.1007/s10570-024-05926-5

IF: 6.123

2024-05-11

Cellulose

Abstract:The paper industry is constantly seeking innovative ways to improve paper quality, increase process efficiency and reduce environmental impact. The unique properties of cationic modification of hemicellulose provide an opportunity to achieve these goals. Herein, eucalyptus hemicellulose was modified with quaternary ammonium groups to yield cationic hemicellulose (CH), which was used to elaborate structural and functional interactions between CH and cellulose nanofibrils (CNFs). These interactions were quantitatively monitored by a quartz crystal microbalance with dissipation (QCM-D). We empirically studied bonding motifs between CNFs and hemicellulose by forming films. The degree of substitution (DS) of CH was made between 0.095 and 0.254 by varying the molar ratio of the reaction, leading to a gamut of positive charges in hemicellulose. The adsorption of CH to a CNF surface was related to electrostatic interactions. The high DS of CH had higher adsorption rate and larger adsorption capacity within the CNF-surface, while CH as a reinforcing agent significantly increased the tensile strength of the film by hydrogen bonding, which was 71% higher than that of unmodified hemicellulose. The strong binding between CH and nanocellulose may highlight a platform to develop paper additives and nanocellulose composites for high-value applications.

materials science, textiles,polymer science, paper & wood

A View of Etherification of Hemicelluloses

Mechanistic Investigation of Cellulose Formate to 5-Hydroxymethylfurfural Conversion in DMSO-H2O

One-pot Conversion of Cellulose to HMF under Mild Conditions Through Decrystallization and Dehydration in Dimethyl Sulfoxide/tetraethylammonium Chloride

Selective 5-hydroxymethylfurfural production from cellulose formate in DMSO-H<sub>2</sub>O media

The Study of Separation and Thermodynamics of Adsorption of the Enantiomers of Ethofumasate on A Modified Cellulose

Synthesis of cationic hemicellulosic derivatives with a low degree of substitution in dimethyl sulfoxide media

Valorization of industrial xylan-rich hemicelluloses into water-soluble derivatives by in-situ acetylation in EmimAc ionic liquid

Long-term consequences of treatment interruptions in chronically HIV-1-infected patients.

Reactive and Mechanistic Insights into the Acid-Catalyzed Conversion of Concentrated C 5 /C 6 Sugars in Ethylene Glycol

Modification methods’ effects on the characteristics of carboxylated cellulose fibers: Carboxyl group introduction method versus physical properties

Hemicellulose and unlocking potential for sustainable applications in biomedical, packaging, and material sciences: A narrative review

Progress, Challenge and Perspective of Fabricating Cellulose

Revisiting various mechanistic approaches for cellulose dissolution in different solvent systems: A comprehensive review

Preparation, compatibility and structure of acetylated cellulose/lyocell composite fiber

Synthesis of hydroxyethyl cationic cellulose ether

Hydrogen-bonded Thin Films of Cellulose Ethers and Poly(acrylic Acid).

RETRACTED: 2D NMR Assisted Structure Elucidation of Three Cyanoethylated Cellulose Derivatives and Correlated with Their Properties

Renewable hemicellulose-based materials for value-added applications

Barrier Film of Etherified Hemicellulose from Single-Step Synthesis

Carboxymethyl Xylan - Control of Properties by Synthesis

A new recognition of the binding of cellulose fibrils in papermaking by probing interaction between nanocellulose and cationic hemicellulose