Abstract:Carbon coated LiFePO4 (LiFePO4/C) with different contents of high electron conductive iron phosphide phase was synthesized by an aqueous sol–gel method in a reductive sintering atmosphere. Different synthesis parameters were used for adjusting the microstructure and phase compositions of the products. The effects of the carbon coating and iron phosphides on the electrochemical properties of the LiFePO4/C electrodes were studied by means of testing the discharge capacities at rates of 0.1–5C (1C=170mAhg−1) and analyzing the CV curves. The results show that carbon coating in a content of 1.5wt.% derived from the carbon source of ethylene glycol greatly decreases the particle size of LiFePO4 in one order in the specific surface area, and significantly improves the rate capability of LiFePO4. The effect of the content of FeP on the capacity of the carbon coated LiFePO4 was different at different discharge rates. Increasing the content of FeP from 1.2 to 3.7wt.% slightly decreases the capacity of LiFePO4/C at low discharge rate (0.1C and 1C), but obviously increases the capacity of LiFePO4/C when the discharge rate is increased to 5C. For the carbon free sample, even it also has 1.8wt.% FeP, it still possesses poor capacity due to the large particle size of LiFePO4 and the lack of conductivity. And too much iron phosphides lowers the discharge capacity of the electrode since they are inert for the deinsertion/insertion of lithium ion.

The Effect of Carbon Content on the Electrochemical Performance of the LiFe_(0.3)Mn_(0.6)Co_(0.1)PO_4/C

High-performance Carbon-Coated LiMnPO4 Nanocomposites by Facile Two-Step Solid-State Synthesis for Lithium-Ion Battery

Hydrothermal synthesis and electrochemical performance of multicomponent LiMn0.8Fe0.19Mg0.01PO4

Electrochemical property of LiFePO4/C composite cathode with different carbon sources

The Effects of Fe@C Nanoparticles on the Lithium Storage Performance of VS4 Anode

Effect of Mn content on electrochemical performance and energy density of LiFe1-xMnxPO4/C

Effects of carbon coating and iron phosphides on the electrochemical properties of LiFePO4/C

Effects of Carbon Content and Current Density on the Li+ Storage Performance for MnO@C Nanocomposite Derived from Mn-Based Complexes

Effect of Consumption Amount of Lithium Salt on the Properties of LiFePO4/C Cathode Materials

Electrochemical Performance and Stability of LiMn0.6Fe0.4PO4/C Composite

Optimization of Carbon Coatings on LiFePO4: Carbonization Temperature and Carbon Content

Structure And Electrochemical Properties Of Lifepo(4)/C With Different Disordered/Graphitized Carbon

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance

Synthesis of LiFePO 4 /C Composite Electrode with Enhanced Electrochemical Performance

An Orthogonal Investigation of Sulfur Modified Li2FeSiO4 for Lithium Ion Batteries

The Effect of Different Amounts of Conductive Carbon Material on the Electrochemical Performance of the LiFePO4 Cathode in Li-Ion Batteries

Effects of pyran-ring structure in carbon sources on the electrochemical performance of liFePO4/C

Effects of Reductive Conditions on the Microstructure and Electrochemical Properties of Sol-Gel Derived LiFePO[sub 4]∕C

Rate Performance of Limnpo4 Based Materials from Different Carbon Source Addition Process

Synthesis of carbon-coated LiMn0.8Fe0.2PO4 materials via an aqueous rheological phase-assisted solid-state method