Abstract:This paper numerically investigates the formation mechanism of geyser boiling inside a two-phase closed thermosyphon (TPCT) with inclined orientations of 0°, 30° and 60°, filling ratio varying from 0.25 to 1.25 and heat flux ranging from 25 to 150 W. The regional flow patterns of geyser boiling phenomenon (GBP) are illustrated and the thermal resistance is regarded as the evaluation criterion. The volume of fluid (VOF) method with Lee model are applied and the condensation time relaxation coefficient is corrected and benchmarked with experimental data reported in existed literatures. Result shows that a significant precision improvement on the TPCT wall temperature prediction can be achieved when employing the condensation time relaxation coefficient of 100. Meanwhile, the GBP is more likely to occur at low power inputs (<75 W) and high filling ratios (>1) which will be pronouncedly alleviated by the inclined orientation due to the acceleration of bubble departures. For further erasing GBP, the stationary bended structures are investigated with bending angles ranging from 0 to 60°. A new criterion based on the liquid level fluctuation is also proposed to evaluate the intensity of GBP. It is found that the TPCT with bended structures present much more prominent effect on GBP alleviation compared to cases with inclined orientations due to the lower bubble departure resistance at the evaporation region and the abrupt pressure variation at the bending site. The case with the bending angle of 45° shows the lowest liquid level of 0.32, indicating the optimal effect on GBP restraint.

Experimental Study on Flow Characteristics and Parameters Influences of Geysering Phenomena in Heating System

Preliminary Experimental Study on Geysering Phenomena in Heating System

Experiment on Geysering Phenomena in Heating System

An experimental study on geysering phenomena induced by buoyancy in a heating system

Geysering Mechanism and Model Study for Heating System

Study on Geysering Flow and Boiling Characteristics for Two-phase Flow in Vertical Channel

Experimental Investigation on the Thermo-Hydraulic Characteristics and Occurrence Boundary of Geyser in a Cryogenic Pipe

Experimental investigation on geysering induced intermittent flow oscillation

Study of the Natural Circulation Flow Boiling Heat Transfer Based On Partially Superhydrophilic Surface Modification

Investigation of Appearance and Intensity of Geyser Phenomenon in a Vertical Cryogenic Pipe

Experimental Study of Flow Boiling Instabilities in Horizontal Tubes under Gas–liquid Stratification Condition: Effects of Heat Flux and Inlet Subcooling Degree

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

Investigation on cryogenic geyser characteristics in rocket cryogenic pipelines with a horizontal section

Three-dimensional CFD simulation of geyser boiling in high-temperature sodium heat pipe

Visualization experiments on the geyser boiling-induced instability in vertical circular tube at low-pressures

Numerical Investigation on the Mechanism of Geyser in Cryogenic Fluid Pipes

Experimental Investigation on Heat Transfer Characteristics of Smooth Tube with Downward Flow

Experimental Study on the Difference of Heat Transfer Characteristics Between Vertical and Horizontal Flows of Supercritical Pressure Water

Experiment of Heat Transfer to Supercritical Water Flowing in Vertical Annular Channels

Study on Local Sub-Cooling Boiling in the Vertical Upward Pipe

Numerical Study on Prediction, Evaluation and Restraint Mechanisms of Geyser Boiling Phenomenon in Two-Phase Closed Thermosyphons