Abstract:A temperature-dependent thermodynamic model was developed for representing the solid–aqueous equilibria in the quaternary NaCl + KCl + RbCl + H2O system based on the previous ones for binary and ternary systems. The solid–liquid equilibria in the quaternary system were first predicted by the developed model and then verified by conducting the experiments at T = 298.15 K by an isothermal equilibrium method with equilibration times of 5 and 160 days, respectively. The predicted univariant curve saturated with NaCl(cr) and (K,Rb)Cl(ss) in the system is in good agreement with our experimental data. Moreover, to verify the reliability of the model for the prediction of solid solution composition that coexisted with NaCl(cr), the XRD quantitative analysis technique based on the inverse Vegard approach is used. The experimentally determined solid solution compositions well support the results predicted by the model, indicating that the model can simultaneously predict the compositions of aqueous solution and solid solution that coexisted with a pure salt, i.e., NaCl(cr), in a system under an equilibrium state. Finally, phase diagrams of the quaternary NaCl + KCl + RbCl + H2O system at a temperature range of 273.15–373.15 K were predicted. These diagrams are useful for the future industrial applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jced.0c00384?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jced.0c00384</a>.Effect of temperature on the phase behavior in the quaternary NaCl + KCl + RbCl + H2O system and predicted phase diagrams of the system at various temperatures (<a class="ext-link" href="/doi/suppl/10.1021/acs.jced.0c00384/suppl_file/je0c00384_si_001.xlsx">XLSX</a>)This article has not yet been cited by other publications.

Isobaric Heat Capacity for NaOH-NaAl(OH)_4-H_2O Ternary Solutions System

Heat Capacities of Binary Mixtures of Acetic Acid with Acetic Anhydride and Methenamine at Different Temperatures

Isobaric Heat Capacity of Potential Liquid Desiccant Solutions Containing Calcium Chloride and Its Mixtures

Thermal Properties of Alkaline Sodium Borohydride Solutions

Solid–liquid Equilibrium (SLE) of Ternary System 3-Nitrophthalic Acid+4-Nitrophthalic Acid+1,4-Dioxane at (283.15, 293.15, 303.15, 313.15 and 323.15)K

Heat capacities and thermal conductivity of ternary mixtures of water+ethanol+1,2-ethanediol between 75 and 350 K

Viscosity and density of ternary solution of calcium chloride + sodium chloride + water from T = (293.15 to 323.15) K

Adsorption of H+, OH− and Background Electrolyte Ions on Alumina — Point of Zero Charge, Triple Layer Model (TLM) Parameters and Thermodynamic Parameters

Determination and Correlation of Phase Equilibria of Quaternary System KCl–KH2PO4–CO(NH2)2–H2O and Its Ternary Subsystems at 323.15 and 333.15 K

Static and Kinetic Studies of the Adsorption/Desorption of H+ and Oh- Ions on Alumina in Aqueous Nano3 Solution

Solid–Aqueous Phase Equilibria in the Quaternary NaCl + KCl + RbCl + H 2 O System: Thermodynamic Predictions and Experimental Verifications at 298.15 K

Density and excess molar volume of ternary mixtures monoethanolamine + ethanol/n-propanol + H2O at (293.15–323.15) K and 101 kPa

Study on the Phase Equilibrium of the Quaternary Na 2 SO 4 –NaBr–NH 4 Br–(NH 4 ) 2 SO 4 –H 2 O System at 298.15 and 323.15 K

A small sample-size automated adiabatic calorimeter from 70 to 580 K - Molar heat capacities of α-Al2O3

Properties of pure n-butylammonium nitrate ionic liquid and its binary mixtures of with alcohols at T = (293.15 to 313.15) K

Low-temperature heat capacities and phase transitions of the ternary system of (0.195 ethandiol + 0.132 ethanol + 0.673 water)

Thermodynamically Traceable Calorimetric Results for Aqueous Sodium Chloride Solutions from T = (273.15 to 373.15) K up to the Saturated Solutions: Part 2 —The Quantities Associated with the Partial Molar Heat Capacity

Measurement and correlation of solid–liquid equilibrium of ternary system KCl-CO(NH2)2-H2O at 313.15 K and 353.15 K

Low-temperature heat-capacities of corundum-type structured (Fe2O3)1−x(Al2O3)x solid solutions with x = 0.25, 0.50 and 0.75

Experimental investigation and thermodynamic assessment of the Na2O–Al2O3–CaO system

Enthalpy and heat capacity of liquid Na15Pb4 and Na50Pb50 alloys