Abstract:In precast reinforced concrete frame structures, beam-column joints suffer severe damage under large deformations, which may significantly influence their performance in resisting progressive collapse. A static progressive collapse test was conducted on one conventional reinforced concrete beam-column substructure (RC) and four precast reinforced concrete beam-column substructures with wet connections (PCWC). A quasi-uniformly distributed load was applied to the substructures to simulate gravity loads. The first group of PCWC specimens consisted of two specimens with different layouts of mechanical sleeves, in which the beam and column reinforcements were connected through mechanical sleeves and grout-filled coupling sleeves, respectively. In the second group of PCWC specimens, the beam and column reinforcements were joined through a 90° bend anchorage and lapping in grout-filled holes, respectively. In one of the PCWC specimens in this group, unbonded prestressed strands (UPS) were also adopted. For the first group, premature failure of the mechanical sleeve connections occurred, which reduced the collapse resistances of the PCWC specimens compared with that of the RC specimen. For the second group, the damage mode and collapse resistance of the specimen without UPS were similar to those of the RC specimen. Furthermore, the collapse resistance of the specimen with UPS, which generated additional axial force along the beam, was greater than that of the RC specimen. The connections of the column reinforcements in all PCWC specimens exhibited robustness under large deformations of progressive collapse, even though large horizontal deformations and slips along the grout-layer were observed in the specimen with UPS. An analytical model was then developed to study the collapse resistances of the specimens, particularly the contributions of the compressive arch action and the catenary action. Finally, numerical simulations were used to optimize the configurations of PCWC connections, namely the arrangements of the mechanical sleeves, levels of the UPS, and strength of the cast-in-situ concrete, to improve their performance in resisting progressive collapse.

Evaluation on the Failure Modes and Progressive Collapse Resistance of Self-Centering Infilled Precast Concrete Frame

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Experimental study on progressive collapse of self-centering precast concrete frame with infill walls

Progressive collapse resistance of self-centering infilled precast concrete frame under side column removal scenario

Effect of Concrete Infill Walls on the Progressive Collapse Performance of Precast Concrete Framed Substructures

Progressive Collapse Resistance Analysis of Precast Concrete Frames with Infill Walls

Evaluation on the Progressive Collapse Resistance of Infilled Reinforced Concrete Frames Based on Numerical and Semi-Analytical Methods

Anti-collapse mechanism and reinforcement methods of composite frame with CFST columns and infill walls

Analytical model on progressive collapse resistance of prestressed precast concrete frame under middle column removal scenario

Progressive collapse resistance of prestressed concrete frame structures with infill walls considering instantaneous column failure

Efficient numerical model for progressive collapse analysis of prestressed concrete frame structures

Analysis of Progressive Collapse Resistance in Precast Concrete Frame with a Novel Connection Method

Anti-collapse performance of concrete-filled steel tubular composite frame with RC shear walls under middle column removal

Experimental Study on the Progressive Collapse Performance of RC Frames with Infill Walls

Experimental and numerical investigation of the progressive collapse of precast reinforced concrete frame substructures with wet connections

Numerical Modelling of the Progressive Collapse of Reinforced Concrete Frames with Different Lateral Restraints

Cfrp Strip Cable Retrofit of Rc Frame for Collapse Resistance

Study on Progressive Collapse Behaviour of Steel-Framed Substructures with Sheathed CFS Stud Infill Walls

Numerical analysis on collapse performance of post-tensioned concrete frames with post-tensioning BFRP bars under an interior-column-removal scenario

Progressive collapse analysis of precast reinforced concrete beam-column assemblies with different dry connections

Progressive Collapse Analysis of Concrete-Filled Steel Tubular Frames with Semi-Rigid Connections