Abstract:To detect low-frequency gravitational waves, it is necessary to eliminate the interference of geo-noise and build a laser interference gravitational-wave detection device in space. Space gravitational-wave detection missions, namely Taiji, LISA, and Tianqin, have been planning to achieve picometer sensitivity on an interferometer arm of several million kilometers to meet the gravitational-wave detection requirements. Because of the orbit evolution and the time delay in interferometer arms, the direction of the transmitted laser beam changes; consequently, a remote telescope cannot receive the laser beam to complete the inter-satellite laser interference. In this study, a two-dimensional point-ahead angle mechanism (2DPAAM) is designed and demonstrated to solve the aforementioned problem. Based on the design concept of aligning the rotation center with the mirror surface center, the 2DPAAM employs a four-link flexible-hinge structure, length expanding and contracting piezoelectric stack actuators, and closed-loop control of capacitive sensors to realize two-dimensional picometer-stable, high-precision rotation. A static model is established to analyze the rotational characteristics, and finite element analysis is performed to study the mechanical properties and to verify the rotational characteristics. The yaw and pitch stiffness errors are ∼0.93% and 5.9%, respectively, when the theoretical results are compared with the simulation results. A series of experiments are conducted on the developed 2DPAAM, and the results show that the rotary ranges of yaw and pitch motions attain ±270 and ±268 μrad, respectively. The rotational accuracies of both yaw and pitch motions attain ∼0.35 μrad, and the optical path difference is less than 10pm/Hz when the frequency is between 1 mHz and 1 Hz, by analogy.

A Multi-Axis Interferometer Based 6-Dof Readout System for the Gravitational Wave Detection

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

Six-Degrees-of-Freedom Test Mass Readout via Optical Phase-Locking Heterodyne Interferometry

Laser Interferometric Multi-Degree-of-Freedom Measurement Technology in Space Gravitational-Wave Detection

High-Performance Telescope System Design for Space-Based Gravitational Waves Detection

Laboratory development of a heterodyne interferometric system for translation and tilt measurement of the proof mass in the space gravitational wave detection

Design and sensitivity of a 6-axis seismometer for gravitational wave observatories

Development and analysis of two-dimensional point-ahead angle mechanism for space gravitational-wave detection

Proof-of-principle Experimental Demonstration of Time-delay-interferometry for Chinese Space-borne Gravitational Wave Detection Missions

Verification of Laser Heterodyne Interferometric Bench for Chinese Spaceborne Gravitational Wave Detection Missions

Interferometer Techniques for Gravitational-Wave Detection

A Novel Delay-time Enlarged 3-D Gravitational Wave Detection System

Core Payload of the Space Gravitational Wave Observatory: Inertial Sensor and Its Critical Technologies

Two-Degree-Of-Freedom Displacement Measurement System Based on Double Diffraction Gratings

Key technologies analysis and design of ultra-clean & ultra-stable spacecraft for gravitational wave detection

Dual-recycled cavity-enhanced Michelson interferometer for gravitational-wave detection.

Absolute Ranging with Time Delay Interferometry for Space-Borne Gravitational Wave Detection

Tilt interferometer for detecting gravitational wave signals at high frequencies

GWSpace: a multi-mission science data simulator for space-based gravitational wave detection