Abstract:The mechanical properties of nickel-based single crystal superalloys deteriorate with increasing misorientation, thus the finished product rate of the casting of single crystal turbine airfoils may be reduced due to the formation of grain boundaries especially when the misorientation angle exceeds to some extent. To this day, evolution of the microstructures at the grain boundaries with misorientation and the relationship between the microstructures and the mechanical properties are still unclear. In this work a detailed characterization of the misorientation related microstructure at the grain boundary in DD6 single crystal superalloy has been carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques; the elemental distribution at the grain boundaries has been analyzed by energy dispersive (EDS) X-ray mapping; and the effect of precipitation of μ phases at the grain boundary on the mechanical property has been evaluated by finite element calculation. It is shown that the proportion of γ phase at the grain boundaries decreases, while the proportion of γ′ phase at the grain boundaries increases with increasing misorientation; the μ phase is precipitated at the grain boundaries when the misorientation angle exceeds about 10° and thus it could lead to a dramatic deterioration of the mechanical properties, as well as that the enrichment of Re and W gradually disappears as the misorientation angle increases. All these factors may result in the degradation of the mechanical properties at the grain boundaries as the misorientation increases. Furthermore, the finite element calculation confirms that precipitation of μ phases at the grain boundary is responsible for the significant deterioration of the mechanical properties when the misorientation exceeds about 10°. This work provides a physical imaging of the microstructure for understanding the relationship between the mechanical properties and the misorientation of the grain boundaries in the single crystal superalloy. Based on our study we hope that we can offer some scientific basis for further improvement of the nickel-based single crystal superalloys.

3D Characterization of Abnormal Grain Growth in Nanocrystalline Nickel

Abnormal Grain Growth: A Potential Way to Construct Gradient Structure

Coordinated grain boundary deformation governed nanograin annihilation in shear cycling

Investigation of Boundary Migration During Grain Growth in Fully Recrystallised High Purity Nickel

Determination of five-parameter grain boundary characteristics in nanocrystalline Ni-W by Scanning Precession Electron Diffraction Tomography

Magnetically induced abnormal grain growth in pure nickel

Abnormal grain growth in ultrafine grained Ni under high-cycle loading

Analysis of the Growth of Individual Grains During Recrystallization in Pure Nickel

Atomic Simulation of Void Location Effect on the Void Growth in Nickel-Based Single Crystal

Accommodation of Large Plastic Strains and Defect Accumulation in Nanocrystalline Ni Grains

Grain Growth Kinetics of Nanocrystalline Nickel Produced by Surface Mechanical Attrition Treatment

Continuum level simulation on the deformation behavior of nanocrystalline nickel

Kinetic study of grain growth in highly (111)-preferred nanotwinned copper films

Grain boundary character distributions in nanocrystalline metals produced by different processing routes

3D Characterization of a Nanostructured Al-Cu-Mg Alloy

Abnormal Grain Growth with {1 0 0} Planar Interface in the Electrodeposited Nickel

One-Step Annealing Cu-Al-Mn-Fe Cast Alloys to Induce Abnormal Grain Growth and Produce Single Crystals with New Mechanism of Continue Misorientation Gradient

Abnormal grain growth with {100} planar interface in the electrodeposited nickel

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy

Mechanical Behavior and Thermal Stability of Nanocrystalline Metallic Materials with Thick Grain Boundaries

Shear-induced directional grain growth in ag nanocrystalline films under nanoindentation