Abstract:Fiber lasers (FLs) with excellent beam quality, high reliability and compact structure are urgently demanded in the fields of national security and scientific research, such as high-power laser, free-space optical communication, and gravitational wave detection. These applications rely on rare-earth-doped high-gain glass fibers, which play critical roles in FLs. However, the rare earth solubility of commercial silica glass (similar to 10(19) ions/cm(3)) is restricted by its rigid structures. Thus, the active fiber fabricated by silica glass typically has low gain, which becomes a challenge for developing high-performance FLs. Phosphate-based glass is a promising candidate because it has higher solubility of rare earth (similar to 10(21) ions/cm(3)) and larger emission cross-section compared with silica glass. By incorporating fluoride and sulfate into phosphate matrix, the fluoro-sulfo-phosphate (FSP) glass that combines the favorable spectroscopic properties of fluoride and sulfate glasses with the advantages of phosphate glass can be derived. The addition of fluoride reduces the linear and nonlinear refractive indices of phosphate glass, which is advantageous for operating FLs. The maximum phonon energies of fluoride (similar to 500 cm(-1)) and sulfate (similar to 990 cm(-1)) are lower than that of phosphate (similar to 1200 cm(-1)). Therefore. sulfate and fluoride ions can tailor the local structures of rare earth and enhance radiative transition probability, leading to increased optical gain. Herein, this work systemically investigated the FSP glasses with the compositions of R2SO4-AlF3-RPO3/Zn(PO3)(2) (R=Li. Na. K). Their glass-forming regions were determined under the guidance of thermodynamic calculation method. The dependence of properties on structure of the FSP glass was analyzed by solid-state nuclear magnetic resonance (NMR). Raman spectra, differential scanning calorimetry (DSC), durability test. etc. Then the luminescent properties of Er3+/Yb3+ co-doped FSP laser glasses were characterized. Optimized laser glass was fabricated into high-gain fibers and an FL has been demonstrated. The results illustrate that the glass-forming regions of FSP systems can be quickly determined based on the thermodynamic calculation. which provides an effective and predictive method for designing novel laser glasses. Incorporating Zn(PO3)(2) into FSP glass can enhance the interactions between cations and anions and increase the polymerization degree of glass structure, resulting in improved anti-crystallization ability and chemical durability, which is beneficial for preparing large-scale samples and drawing fibers. The Er3+/Yb3+ co-doped FSP laser glasses show excellent spectroscopic properties at similar to 1.5 mu M, which exhibit longer lifetime (5.9-7.5 ms), larger emission cross section (8.5 x10(-21) 9.0 x10(-21) cm(2)) and lower saturation intensity (1.0 x10(7) W m(-2)) than some phosphate, fluorophosphate and telluroborate laser glasses. Er3+/Yb3+ co-doped fiber based on FSP glass shows a net gain of 4.7 dB/cm@1535 nm. An FL with a threshold of similar to 50 mW and a slope efficiency of 11.3% has been demonstrated based on such fiber. Considering its high gain characteristics. the narrow-line-width single-frequency FL and high-repetition-rate ultrafast FL are expected to be realized further.

Effect of BaF₂ and Y₂O₃ on the Raman Scattering Characteristics of Fluorotellurite Glasses

Effects of alkaline-earth fluorides and OH- on spectroscopic properties of Yb3+ doped TeO2-ZnO-B2O 3 based glasses

Spectroscopic Properties of Yb3+-Doped Teo2-Bao-Baf2-Nb2o5-Based Oxyfluoride Tellurite Glasses

High concentration Tm3+ doped TeO2-Al2O3-BaF2 glass for ~ 2 μm fiber lasers

Effect of F− Ions on Physical and Spectroscopic Properties of Yb3+-doped TeO2-based Glasses

Visible-infrared optical performance of Er3+-doped fluorotellurite glass via hybrid structural fluctuations

Study on the laser-induced damage characteristics and structure changes of fluorotellurite glass under femtosecond pulsed laser irradiation

Microstructure and Luminescence of Yb3+-doped Fluorosilicate Glass Ceramics

Research on optical properties of Yb3+/Er3+ co-doped oxy-fluoride glass

Effect of F− Ions on Emission Cross-Section and Fluorescence Lifetime of Yb3+-doped Tellurite Glasses

Thermal Analysis, Spectra and Laser Properties of a New Yb3+-doped Multicomponential Tellurite-Based Glass

Thermal Analyses, Spectral Characterization and Structural Interpretation of Yb3+ Doped TeO2–ZnO–ZnCl2 Glasses

Thermal Stability and Raman Scattering Spectra of Tellurite Glasses for Broadband Fiber Raman Amplifiers

Spectroscopic properties of new Yb 3+-doped TeO 2-ZnO-Nb 2O 5 based tellurite glasses with high emission cross-section

Erbium-doped fluoro-sulfo-phosphate high-gain laser fiber

RETRACTED: Fluorescence Lifetime Increase by Introduction of F− Ions in Ytterbium-Doped TeO2-based Glasses

Spectroscopic and thermal properties of Yb 3+ doped TeO 2 –Bi 2 O 3 –Nb 2 O 5 based tellurite glasses

Thermal, Spectra and Laser Properties of Yb:Zinc-Germanium-Tellurite Glasses for Laser

Spectroscopic Properties Of Zrf4-Based Fluorophosphate Laser Glasses With Large Stimulated Emission Cross-Section And High Thermal Stability

Effects of Al2O3 on the Thermal Stability, Glass Configuration of Yb3+-doped TeO2–K2O–ZnO–Al2O3 Based Tellurite Laser Glasses

Emission properties of ytterbium-doped GeO2–TeO2 glasses