Abstract:Abstract Performance requirements of a higher throughput and accuracy in precision motion systems, such as wafer stage used in integrated circuit manufacturing, are ever increasing. The lightweight design, as one of the design methods, can results in less power consumption and less negative environmental impacts for the required high levels of acceleration. The aim of this research is to investigate the advantage of the lightweight design and to mitigate the negative effect caused by the flexible characteristics using an appropriate control method. In this paper, a prototype wafer stage is the analysis object. Since the mass of the horizontal drive motors accounts for a large proportion of the total mass of the wafer stage, a novel lightweight optimization frame based on the minimum motor mass is presented, while a Lorenz motor model based on finite element method (FEM) and artificial neural network (ANN) is firstly constructed. Then the controller adopting the PID with the maximum control bandwidth and pole placement method are designed. Through numerical analysis, the mass of the mover of the mover of this stage is reduced from 10.28 Kg to 6.078 Kg after lightweight optimization. Taking the Moving Average (MA) and Moving Standard Deviation (MSD) of the servo error in Z-direction as the control index, a closed-loop simulation result shows that the lightweight wafer stage can separately fulfil the requirement of the MA and MSD of the servo error in z-direction within 20nm and 30nm just as the current rigid-body wafer stage without the lightweight optimization.

Ultra-low Power Drive System Design for Fiber Positioner Robot

OPCIO: Optimizing Power Consumption for Embedded Devices via GPIO Configuration

A 33nW Fully Autonomous SoC With Distributed Cooperative Energy Harvesting and Multi-Chip Power Management for mm-Scale System-in-Fiber

Developing Micro DC-Brushless Motor Driver and Position Control for Fiber Positioners

A User-Configured Low Power Optimizing Mechanism on Embedded System

Design of a New Temperature Compensating System for High Power Circulator of EAST LHCD System

Low-Power Low-Cost Implementation Of Ieee 802.15.4 In Wisn Soc Design

Study on Temperature and Current Sensors Based on Optical Driving Optical Fiber Transmission

A Novel Framework of Lightweight Optimization Design of a Prototype Wafer Stage With Control Verification

Power Supply Module Design in the Low Power Consumption Application

Design and Realization of Stepping Motor Drive System Controlled by Single-Chip Microcomputer

Low Power-Consumption IP Core Design on for Universal Video Output Controller

A Light High-power DC Motor Drive System

Reducing Power of Traffic Manager in Routers Via Dynamic On/off-Chip Scheduling

Design of a Power Efficient Self-Adaptive LVDS Driver.

A novel Low-Voltage Low-Power LVDS Driver Design

Design of Low-consumption of SoC Systems

An Energy-Efficient Strategy for Microcontrollers

Energy Efficient Design for Multi-Shelf IP over WDM Networks

DLPS: Dynamic Laser Power Scaling for Optical Network-on-Chip

Operating-System Aided Power-aware Policy for Embedded Peripheral Device