Abstract:Abstract In order to provide a theoretical basis for studying the shock wave propagation and evolution generated by cylindrical charge of near-field underwater explosion, the characteristics of initial shock waves generated by cylindrical charge are studied. First, a new theoretical model for initial shock waves is proposed by the polar curve method. Based on the theoretical model and the simulated results, the influences of incident angle, length-to-diameter ratio and type of charge on the initial shock waves are analysed. Then the experiments of underwater explosion load tests are carried out to verify the theoretical and simulation results. Finally some instructive conclusions are drawn: i) The two-dimensional theoretical model can calculate the initial underwater shock wave pressure and its direction of cylindrical charge through detonation velocity, detonation pressure, explosive density and incident angle, which is provides a theoretical basic for studying the shock wave propagation and evolution studies. By comparing the theoretical results with the numerical results verified by experiments, the maximum error is not more than 9.93%. ii) Increasing the incident angle α 0 will reduce the initial shock wave pressure of cylindrical charge and make its direction deflect towards the material interface. When the incident angle α 0 is in the range of 0 - 10°, increasing the incident angle makes the initial shock wave pressure decrease rapidly as a power function. With the increasing of the incident angle, the attenuation rate of the initial shock wave firstly decreases and then increases when the incident angle α 0 is in the range of 10 - 72°. This phenomenon explains the reason that the axial and radial initial shock wave pressures are much higher than those in other directions after the central initiation of cylindrical charge. iii) According to the geometric relationship, the length-to-diameter ratio of the charge will limit the range of the incident angle. The length-to-diameter ratio will affect the initial shock wave pressure at the same initiation time. The pressure decreases with the increase of the length-to-diameter ratio when the initial shock wave is formed on the cylindrical surface of the charge.

Effects of Electrical Parameters on Weak Shock Waves Induced by Spark Discharge

Discharge Electrode Configuration Effects on the Performance of a Plasma Sparker

Experimental Study of the Electric Pulse-Width Effect on the Acoustic Pulse of a Plasma Sparker

Experimental study on electrostatic spark discharge under different electrode parameters, pressure and gas component

The Effect of the Configuration of a Single Electrode Corona Discharge on Its Acoustic Characteristics

Investigations Of Dynamics Of A Single Spark-Induced Bubble In Saline Water

Measurement of effective energy from a high-voltage spark discharge and its some related problems

Experimental Study on Pressure Wave Characteristics of High-Voltage Discharge in Water with Hemispherical Electrodes.

Underwater electrical wire explosions under different discharge types: An experimental study with high initial energy storage

Effects Of Laser And Plasma Parameters On Shock Wave Generation And Acceleration Of Protons

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: Ii. Influence of Wire Configuration and Stored Energy

Numerical Investigation on the Effect of Electrical Parameters on the Discharge Characteristics of NS-SDBD

Study on the characteristics of initial shock waves generated by cylindrical charge for underwater explosion

Effects of Wire Size on Electrical and Shock-Wave Characteristics in Underwater Electrical Explosions of Aluminum Wires

Numerical Investigation of Shock Wave Characteristics at Microsecond Underwater Electrical Explosion of Cu Wires

PRELIMINARY EXPERIMENT ON SHOCK WAVES GENERATED BY UNDERWATER ELECTRICAL EXPLOSION OF WIRES

Parametric Study of Plasma Resistance in Gas Pulsed Discharges

Parameter Regulation of Underwater Shock Waves Based on Exploding-Wire-ignited Energetic Materials

Comparison of Underwater Electrical Wire Explosions with Large and Small Capacitors Charged to a Same Energy

Shock Wave Characteristics Generated by Electrical Explosion of Different Wires in Water

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: Iii. Shock Wave Characteristics with Three Discharge Loads