Abstract:We present an experimental study of nanosecond high-voltage discharges in a pin-to-pin electrode configuration at atmospheric conditions operating in a single-pulse mode (no memory effects). Discharge parameters were measured using microwave Rayleigh scattering, laser Rayleigh scattering, optical emission spectroscopy enhanced with a nanosecond probing pulse, and fast photography. Spark and corona discharge regimes were studied for electrode gap sizes of 2–10 mm and a discharge pulse duration of 90 ns. The spark regime was observed for gaps <6 mm using discharge pulse energies of 0.6–1 mJ per mm of the gap length. Higher electron number densities, total electron number per gap length, discharge currents, and gas temperatures were observed for smaller electrode gaps and larger pulse energies, reaching maximal values of about 7.5 × 1015 cm−3, 3.5 × 1011 electrons/mm, 22 A, and 4000 K (at 10 μs after the discharge), respectively, for a 2 mm gap and 1 mJ/mm discharge pulse energy. An initial breakdown was followed by a secondary breakdown occurring about 30–70 ns later and was associated with ignition of a cathode spot and transition to a cathodic arc. A majority of the discharge pulse energy was deposited into the gas before the secondary breakdown (85%–89%). The electron number density after the ns-discharge pulse decayed with a characteristic time scale of 150 ns governed by dissociative recombination and electron attachment to oxygen mechanisms. For the corona regime, substantially lower pulse energies (∼0.1 mJ/mm), peak conduction current (1–2 A), electron numbers (3–5 × 1010 electrons per mm), and gas temperatures (360 K) were observed.

Experimental study on electrostatic spark discharge under different electrode parameters, pressure and gas component

Discharge Electrode Configuration Effects on the Performance of a Plasma Sparker

Investigations Of Dynamics Of A Single Spark-Induced Bubble In Saline Water

Experimental Study of the Electric Pulse-Width Effect on the Acoustic Pulse of a Plasma Sparker

Development of a Simple Model for Predicting the Spark-Induced Bubble Behavior under Different Ambient Pressures

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

A gas spark switch electrode impact pressure test platform

Effects Of Background Pressure On The Arc Characteristics Of Gas Spark Gap

Schlieren techniques for observations of long positive sparks: Review and application

The energy distribution structure and dynamic characteristics of energy release in electrostatic discharge process

Numerical Simulation of Static Electric Field in Double Glow Discharge and Edge Effect in Vacuum

Experimental study of atmospheric pressure single-pulse nanosecond discharge in pin-to-pin configuration

Preliminary experimental study on the mechanisms of explosion-electric coupling

Comparison of Electrode Effects in High-Pressure and Low-Pressure Gas Discharges Like Spark-Gap and Pseudo-Spark Switch

Experimental research of diffuse bi-directional pulsed dielectric barrier discharge plasma

Reduced electric field and gas temperature effects on chemical product dynamics in air surface dielectric barrier discharges: from macro-physical parameters to micro-chemical mechanisms

Characterization of corona-induced ionic wind and spark channel formation using high-speed schlieren imaging

Experimental Research on Microdischarge Characteristics of DBD

Influence of Air Pressure on Surface Flashover

Kinetic analysis of direct-current driven microdischarges with thermo-field electron emission at atmospheric pressure

Numerical Investigation on the Effect of Electrical Parameters on the Discharge Characteristics of NS-SDBD