Abstract:Three-level NPC inverters have been widely used in grid-connected systems due to their superior performance compared with two-level inverters, but more switches lead to high fault probability. Meanwhile, the neutral point potential (NPP) fluctuation of the DC link is an inherent problem of three-level NPC inverters. To keep the three-level NPC inverter running stably after single-arm failure, a fault-tolerant control strategy based on an optimised space vector pulse width modulation (SVPWM) is proposed in this paper. Firstly, the common-mode voltage (CMV) of the postfault three-level NPC inverter is analysed and then the preliminary synthesis principles of the reference voltage vector are determined. Then, in order to ensure the NPP balance and the quality of the grid-connected currents, the reference voltage vector synthesis rules are optimised, a low-pass filter (LPF) and a hysteresis comparator are designed, respectively, to ensure the quality of grid-connected currents and effectively decrease the DC link NPP deviation. Finally, the simulation results show that the proposed fault-tolerant control strategy can realize the stable and reliable operation of the grid-connected three-level NPC inverter after single-arm failure, and the CMV can be reduced significantly, the quality of grid-connected currents is also improved. The proposed fault-tolerant strategy also shows good performance when the grid-connected currents change.

Current Sensor Fault Estimation and Fault Tolerance of Grid-Connected Three-Level NPC Inverter Based on Reduced-Order Observer

A Reduced-Order Observer-Based Method for Simultaneous Diagnosis of Open-Switch and Current Sensor Faults of a Grid-Tied NPC Inverter

Reconstructed Current Model Predictive Control of NPC Three-Level Grid-Tied Converter With Current Sensor Fault

Real-Time Estimation and Defense of PV Inverter Sensor Attacks with Hardware Implementation

Study on Neutral-Point Voltage Balance of 3-Level NPC Inverter in 3-Phase 4-Wire System

A Fault-Tolerant Control Strategy for Three-Level Grid-Connected NPC Inverters after Single-Arm Failure with Optimized SVPWM

Phase Current Sensor Fault-Tolerant Technique Using Information Of Dc Side Current In Two-Level Inverter

Open-Circuit Fault Diagnosis and Fault-Tolerant Control for a Grid-Connected NPC Inverter

A Nonintrusive IGBT Open-Circuit Fault and Current Sensor Fault Diagnosis Method for Grid-Tied Three-phase Three-Wire Inverter with Two Current Sensors

Common Mode Voltage Reduction and Neutral-Point Voltage Balance for Quasi-Z-Source Three-Level Neutral-Point-Clamped Inverters

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

Finite-Level-State Model Predictive Control for Sensorless Three-Phase Four-Arm Modular Multilevel Converter

A Robust High-Quality Current Control with Fast Convergence for Three-Level NPC Converters in Micro-Energy Systems

Research on Fault Tolerant Control Method of Three-Level TNPC Inverter

Virtual Voltage Vector-Based Sequential Model-Free Predictive Control for Multiparalleled NPC Inverters

A Novel Observer-Centric Approach for Detecting Faults in Islanded AC Microgrids with Uncertainties

NPC Three-Level Inverter Open-Circuit Fault Diagnosis Based on Adaptive Electrical Period Partition and Random Forest

Study on the Over-Voltage and Over-Current of Grid-Connected Inverters in Non-Fault Conditions

Control Strategy of Neutral-point Potential Balancing in Three-level Inverter

A Voltage Vector Residual Estimation Method Based on Current Path Tracking for T-Type Inverter Open-Circuit Fault Diagnosis

A Simultaneous Diagnosis Approach for Power Switch, Grid-Side Current Sensor, and DC-Link Voltage Sensor Faults in Single-Phase Three-Level Rectifiers