Abstract:Multi-level dual-active-bridge (DAB) DC-DC converters offer higher voltage-blocking capability and larger stepup ratios, as well as increased number of degrees of freedom (DoFs) compared to the traditional two-level DAB converter. Thus, it has potential to be used in medium-voltage DC (MVDC) systems. However, the control complexity of the multi-level DAB converters also increases along with the number of DoFs. When soft-switching is considered as an optimization objective together with other performance indices (e.g., peak or root-mean-square values of the inductor current), the analytical solutions will be difficult to derive due to the increased number of control variables and complicated soft-switching constraints. To address this issue and improve the efficiency of the DAB converter, this paper proposes a control strategy for a multi-level DAB converter to achieve both soft-switching and minimum current stress simultaneously. The analytical solutions are calculated by improved Karush-Kuhn-Tucker (KKT) conditions, where the numerical solutions are used to locate the operating modes and determine the zero-voltage-switching (ZVS) boundaries. This can simplify the Lagrangian function and inequality constraints, and then, the analytical solutions can be obtained by the simplified KKT conditions. In addition, a comprehensive comparison between the quasi-ZVS and strict-ZVS control is carried out, so that the converter efficiency, implementation complexity, and smooth transition between different power levels can be compromised for practical applications. Finally, the performances of the proposed control strategy in terms of current stress minimization and softswitching operation are validated by experimental tests.

A Backflow Power Optimization Method for Three-Level ANPC-DAB Converter

ZVS Operation of DAB Converter Based on Triple-Phase-shift Modulation Scheme with Optimized Inductor Current

Backflow Power Optimization Control for Dual Active Bridge DC-DC Converters

Analysis and Optimal Modulation for 2/3-Level DAB Converters to Minimize Current Stress with Five-Level Control

Wide-Load Range Multiobjective Efficiency Optimization Produces Closed-Form Control Solutions for Dual Active Bridge Converter

A RMS Current Minimization Method for Three-Level ANPC-DAB-Based Distributed Energy Storage System With Full Operation ZVS

Efficiency Promotion Strategy for Three-Level ANPC-DAB-Based DC-DC Converter with Wide-Range Multi-Objective Optimization Method

Minimum Peak Current Optimization Scheme Based on Genetic Algorithm for Three-Level ANPC-DAB Converter with All Switches ZVS

Optimal Control of Multi-Level DAB Converters for Soft-Switching and Minimum Current Stress

A Collaborative Modulation Method of Dual-Side Backflow Power Optimization and Zero-Voltage Switching for Dual Active Bridge

Capacitor Voltage Balancing Control Scheme for 2/3-Level DAB Converters

Full-Power-Range Multi-Objective Optimization Scheme for Three-Level ANPC-DAB-Based Distributed Generation System

Quasi Two-Level Operation and Neutral-Point Voltage Balance Method for a Four-Level ANPC Based Dual Active Bridge DC-DC Converter

Total Backflow Power Minimization for Dual Active Full Bridge DC-DC Converters in Parallel

Optimized Switching Strategy for ANPC–DAB Converter Through Multiple Zero States

Modulation of 2/3-Level Dual-Active-Bridge DC-DC Converters for Soft-Switching and Minimum Current Stress.

Modified Strategy of Phase-shift Modulation to Eradicate Transient DC-Bias for ANPC-DAB Converter

Hybrid-Bridge-Based Dual-Active-Bridge Converter With an Asymmetric Active-Neutral-Point-Clamped Three-Level Bridge

Active Selection of Current Commutation Loop for Hybrid Three-Level Dual Active Bridge DC-DC Converter with TPS Control

Optimized Modulation Scheme of Three-level Dual Active Bridge Converter

Optimized Modulation and Dynamic Control of a Three-Phase Dual Active Bridge Converter with Variable Duty Cycles