Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

An Overview of the Development for Cable-Driven Parallel Manipulator

A Review on Cable-driven Parallel Robots

State-of-the-art on Theories and Applications of Cable-Driven Parallel Robots

Recent Development and Current Status of Parallel Manipulators

Modeling and Workplace Analysis of 3t Cable-Driven Parallel Manipulator

Cable-driven parallel mechanisms: state of the art and perspectives

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Optimal design of a high-speed pick-and-place cable-driven parallel robot

Optimization and Implementation of a High-Speed 3-Dofs Translational Cable-Driven Parallel Robot

Development of a linear decoupling cable-driven manipulator with independent driving joints ,

Small Parallel Cable-Driven Robot Based on TCPF Design and Control Research

A review on topological architecture and design methods of cable-driven mechanism

Design and Control of a Novel Cable Driven Parallel Mechanism

Unlocking the Potential of Cable-Driven Continuum Robots: A Comprehensive Review and Future Directions

ORIENTATION OPTIMIZATION OF CABLE-DRIVEN PARALLEL MANIPULATOR FOR CLEANING THE DEEP SEA FISHING GROUND

A Cable-Driven Parallel Robot With Full-Circle End-Effector Rotations

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

A novel design method for a reconfigurable two-drive cable-driven parallel robot

A Review of Parallel Kinematic Machine Tools: Design, Modeling, and Applications

Design Analysis of a Cable-Driven Parallel Robot with Parallel Cables for Ship Side Painting

Parallel–Serial Robotic Manipulators: A Review of Architectures, Applications, and Methods of Design and Analysis