Pitaya-like Microspheres Derived from Prussian Blue Analogues As Ultralong-Life Anodes for Lithium Storage

Lianbo Ma,Tao Chen,Guoyin Zhu,Yi Hu,Hongbin Lu,Renpeng Chen,Jia Liang,Zuoxiu Tie,Zhong Jin,Jie Liu

DOI: https://doi.org/10.1039/c6ta06692e

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:Prussian blue analogue derived pitaya-like microsphere anodes exhibit outstanding lithium storage performance with ultralong lifetime.

What problem does this paper attempt to address?

Correction: Pitaya-like Microspheres Derived from Prussian Blue Analogues As Ultralong-Life Anodes for Lithium Storage

Lianbo Ma,Tao Chen,Guoyin Zhu,Yi Hu,Haojie Lu,Renpeng Chen,Liang Jia,Zuoxiu Tie,Zhong Jin,Jie Liu

DOI: https://doi.org/10.1039/c9ta90018g

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:Correction for ‘Pitaya-like microspheres derived from Prussian blue analogues as ultralong-life anodes for lithium storage’ by Lianbo Ma et al., J. Mater. Chem. A, 2016, 4, 15041–15048.
Achieving Long-Life Prussian Blue Analogue Cathode for Na-ion Batteries Via Triple-Cation Lattice Substitution and Coordinated Water Capture

Bingxing Xie,Pengjian Zuo,Liguang Wang,Jiajun Wang,Hua Huo,Mengxue He,Jie Shu,Haifeng Li,Shuaifeng Lou,Geping Yin

DOI: https://doi.org/10.1016/j.nanoen.2019.04.059

IF: 17.6

2019-01-01

Nano Energy

Abstract:Prussian blue and its analogues have attracted tremendous interests as cathode materials for sodium ion batteries because of their low cost and high capacity. However, their commercial applications are hindered by low capacity utilization and insufficient cycle life. Here, we report on a MnCoNi-co-doped Prussian blue analogue with high purity and crystallinity by a citrate-assisted controlled crystallization process. Moreover, a novel strategy of in situ capturing for residual coordinated water during sodiation/desodiation process is proposed to achieve a high cyclability by using the aluminium chloride Lewis acid as electrolyte additive. The reversible cubic-rhombohedral phase transition is revealed by in situ X-ray diffraction, ex situ X-ray absorption spectroscopy and transient electrochemical impedance spectroscopy. The MnCoNi-co-doped composite delivers a capacity of 111 mAh g(-1) even at 1C and retains a capacity retention of 78.7% after 1500 cycles for sodium ion batteries. This work provides important insights on eliminating the parasitical coordinated water in lattice and modulating the crystallinity to develop high-performance Prussian blue and its analogues.
Pomegranate-like silicon-based anodes self-assembled by hollow-structured Si/void@C nanoparticles for Li-ion batteries with high performances

Dajin Chen,Chuanying Tao,Tongzhou Chen,Xiaohan Liu,Yong Liu,Gang Xu,Gaorong Han

DOI: https://doi.org/10.1088/1361-6528/abc84e

IF: 3.5

2021-01-01

Nanotechnology

Abstract:Silicon is considered as one of the most promising alternatives to the graphite anode for lithium-ion batteries due to its high theoretical capacity (4200 mAh g(-1)). However, its fragile solid electrolyte interphase cannot tolerate the large volume changes of bare silicon induced by the lithium insertion and extraction, resulting in low Coulombic efficiency. In previous reports, a yolk-shell design, such as Si@void@C, in which the well-defined space allows the silicon particles to expand freely without breaking the outer carbon shells, can effectively improve the Columbic efficiency. Here, we design a pomegranate-like silicon-based anodes self-assembled by the hollow-structured Si/void@C nanoparticles, in which silicon and some voids are together sealed in the outer carbon shells, by the magnesiothermic reduction of the colloidal SiO2@PEI nanospheres prepared by the hydrolysis of the tetraethoxysilane under the catalytic effect of polyetherimide (PEI). Due to the tolerance of the presealed void in the carbon shells of the primary hollow-structured Si/void@C nanoparticles, the prepared pomegranate-like silicon-based anodes deliver a high reversible capacity of 1615 mAh g(-1) at 0.1 C and long cycle life of 73.5% capacity retention at 2 C after 500 cycles, as well as high Coulombic efficiency of 99%.
Pomegranate-like CoO@nitrogen-doped Carbon Microspheres with Outstanding Rate Behavior and Stability for Lithium Storage

Ge Liu,Jie Shao

DOI: https://doi.org/10.1039/c7ta00983f

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Pomegranate-like CoO@nitrogen-doped carbon microspheres, which exhibit outstanding rate behavior and stability for lithium storage, are rationally designed and prepared.
3D pomegranate-like structured Si@void@Ni@C microspheres as high-performance anode in lithium-ion batteries

Hang Zhao,Peijie He,Yan-Gai Liu,Bing Zhu,Xi Zhang,Ruiyu Mi

DOI: https://doi.org/10.1063/5.0062110

IF: 4

2021-08-23

Applied Physics Letters

Abstract:Due to its high theoretical capacity (4200 mAh g−1), appropriate charging potential (∼0.5 V vs Li+/Li), and abundant raw material sources, silicon anode material is considered to be an ideal anode material for lithium-ion batteries. However, its low intrinsic conductivity and huge volume expansion (∼300%) during the lithiation process seriously reduce the cycle life of the battery, causing the battery's capacity to rapidly decay. In this work, 3D pomegranate-like structured @ microspheres are designed and synthesized through hydrothermal and carbonization methods. In this unique structure, the supporting layers, including carbon and nickel layers, can not only improve conductivity but also offer sufficient space to alleviate the volume expansion of silicon particles during the lithium insertion/extraction process. Combined with the above advantages, the 3D pomegranate-like structured @ microspheres anode shows excellent electrochemical performance, such as high first discharge capacity (1697 mAh g−1), fine cycle stability (0.23% capacity attenuation rate for each cycle), and excellent rate performance (97.7% capacity recovery rate).

physics, applied
Accelerated Capacity and Cycling Performance via Facile Instantaneous Precipitation Induced Amorphization for Lithium‐Ion Batteries

Weijia Yang,Jun Huang,Yun Zhang,Nagahiro Saito,Zhengxi Zhang,Li Yang

DOI: https://doi.org/10.1002/smtd.202300691

IF: 12.4

2023-09-08

Small Methods

Abstract:A new structurally‐modified and kinetically‐enhanced amorphous PbSb2O6 nanosphere anode is successfully constructed via facile instantaneous precipitation induced amorphization. It displays prominent lithium storage capability (1512.6 mA h g−1 at 0.1 A g−1) and alleviated volume change (1000 cycles at 3A g−1), which provide a facile strategy for developing high‐performance next‐generation anodes for lithium‐ion batteries. Conversion‐alloying anodes have garnered escalating attention with high theoretical capacity, however, they are seriously hindered by large volume distortion and capacity fading. To counter, structural modification needs more exploration. Herein, advantageous structure and high‐performance are realized in new amorphous PbSb2O6 (PSO‐a) nanosphere via facile instantaneous precipitation induced amorphization; conversion‐alloying mechanism endows it with prominent lithium‐storage capability; nanostructure can shorten ion‐transfer distance and accommodate volume change outside the bulk of PSO‐a; and loosely‐stacked isotropic amorphous structure can enhance kinetics both at electrode/electrolyte interfaces and in the bulk. Volume change is synergistically stabilized from within to outside the bulk, leading to accelerated capacity and cycling. As expected, when employed in half‐cells with 1 m LiPF6 in ethylene carbonate/diethyl carbonate/dimethyl carbonate/fluoroethylene carbonate (3:3:3:1 by mass) as electrolyte, glass microfiber filter as separator, and pure lithium foil as counter electrode, it realizes eminent performance with high specific capacity of 1512.6 mA h g−1 at 0.1 A g−1 and 755.1 mA h g−1 after 1000 cycles at 3 A g−1. To the best of the authors' knowledge, this is the first time PbSb2O6 is utilized as high‐performance anode for lithium‐ion batteries. Furthermore, this facile strategy provides a promising direction for high‐performance amorphous anode material.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Sb2O4 @PPy core-shell nanospheres as anode materials for lithium-ion storage

Lei Jiang,Weihao Yin,Changjian He,Tingting Luo,Yichuan Rui,Bohejin Tang,Lei Jiang,Weihao Yin,Changjian He,Tingting Luo,Yichuan Rui,Bohejin Tang

DOI: https://doi.org/10.1016/j.colsurfa.2022.128843

2022-07-01

Abstract:Globular Sb2O4 @PPy core-shell nanospheres are synthesized via a facile method combining controllable synthesis of nanospheres and conductive nanocomposite engineering. Sb2O4 nanospheres an ultrastable structure generates the relatively large void space and shorten the distance of diffusion, and the thin conductive PPy shell can alleviate the giant volume change. The obtained Sb2O4 @PPy core-shell nanospheres in anode material for lithium-ion batteries exhibit an enhanced electrochemical performance with 932.2 mA h g−1 at 100 mA g−1 after 100 cycles and high rate property (552.8 mA h g−1 at 2000 mA g−1). Notably, a specific reversible capacity about 542.8 mA h g−1 still can be delivered even after 250 long cycles at the high current density of 1000 mA g−1.

chemistry, physical
Structural Engineering of Prussian Blue Analogues Enabling All-Climate and Ultralong Cycling Sodium-Ion Batteries

Jian Peng,Weibo Hua,Zhuo Yang,Jia-Yang Li,Jinsong Wang,Yaru Liang,Lingfei Zhao,Weihong Lai,Xingqiao Wu,Zhenxiang Cheng,Germanas Peleckis,Sylvio Indris,Jia-Zhao Wang,Hua Kun Liu,Shi Xue Dou,Shulei Chou

DOI: https://doi.org/10.1021/acsnano.4c07021

IF: 17.1

2024-07-15

ACS Nano

Abstract:The development of cost-efficient, long-lifespan, and all-climate sodium-ion batteries is of great importance for advancing large-scale energy storage but is plagued by the lack of suitable cathode materials. Here, we report low-cost Na-rich Mn-based Prussian blue analogues with superior rate capability and ultralong cycling stability over 10,000 cycles via structural optimization with electrochemically inert Ni atoms. Their thermal stability, all-climate properties, and potential in full cells are investigated in detail. Multiple in situ characterizations reveal that the outstanding performances benefit from their highly reversible three-phase transformations and trimetal (Mn-Ni-Fe) synergistic effects. In addition, a high sodium diffusion coefficient and a low volume distortion of 2.3% are observed through in situ transmission electron microscopy and first-principles calculations. Our results provide insights into the structural engineering of Prussian blue analogues for advanced sodium-ion batteries in large-scale energy storage applications.
Ultrasmall Co3O4 nanoparticles as a long-lived high-rate lithium-ion battery anode.

Changda Wang,C. Chen,Yuyang Cao,Ping Wan,Zhen Yu,Shuang Zhu,L. Song,Wangsheng Chu,Wenjie Wang,Yang Si

DOI: https://doi.org/10.1039/d3dt00127j

IF: 4

2023-03-06

Dalton Transactions

Abstract:Herein, ultrasmall nanostructured Co3O4 particles have been prepared by a facile two-step synthetic method and furthermore applied to lithium-ion batteries. Benefitting from an increased specific surface area and improved tolerance for volume expansion, they deliver an extremely high specific capacity of 1432.7 mA h g-1 at 0.1 A g-1 and an outstandingly long cycle life with about 511.2 mA h g-1 at 10 A g-1 after 2000 cycles. This work will pave a new way to engineer advanced electrode materials for long-lived high-rate lithium-ion batteries.

Chemistry,Medicine,Engineering,Materials Science
Alloyed BiSb Nanoparticles Confined in Tremella‐Like Carbon Microspheres for Ultralong‐Life Potassium Ion Batteries

Chuyun Huang,Anding Xu,Guilan Li,Hao Sun,Songping Wu,Zhiguang Xu,Yurong Yan

DOI: https://doi.org/10.1002/smll.202100685

IF: 13.3

2021-04-28

Small

Abstract:Bismuth–antimony alloy is considered as a promising potassium ion battery anode because of its combination of the high theoretical capacity of antimony and the excellent rate capacity of bismuth. However, the large volume change and sluggish reaction kinetic upon cycling have triggered severe capacity fading and poor rate performance. Herein, a nanoconfined BiSb in tremella‐like carbon microspheres (BiSb@TCS) are delicately designed to address these issues. As‐prepared BiSb@TCS renders an outstanding potassium‐storage performance with a reversible capacity of 181 mAh g−1 after ultralong 5700 cycles at a current density of 2 A g−1, and an excellent rate capacity of 119.3 mAh g−1 at 6 A g−1. Such a superior performance can be ascribed to the delicate microstructure. The self‐assembled carbon microspheres can strengthen integral structure and effectively accommodate the volume expansion of BiSb nanoparticles, and 2D carbon nanowalls in carbon microspheres can provide fast ion/electron diffusion dynamic. Theoretical calculation also suggests a thermodynamic feasibility of alloyed BiSb nanoparticles for storing potassium ion. Such a work shows that BiSb@TCS possesses a great potential to be a high‐performance anode of potassium ion batteries. The rational designing of multiscaled structure would be instructive to the exploitation of other energy‐storage materials.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Rational design of Prussian blue analogues as conversion anodes for lithium-ion batteries with high capacity and long cycle life

Yun Tang,Jianwei Hu,Hongwei Tao,Yongjian Li,Wei Li,Haomiao Li,Min Zhou,Kangli Wang,Kai Jiang

DOI: https://doi.org/10.1016/j.jallcom.2021.161867

IF: 6.2

2022-01-01

Journal of Alloys and Compounds

Abstract:Prussian blue analogues (PBAs) have garnered much attentions in energy fields due to their three-dimensional open framework and electrochemical tunability. Noticeably, PBAs are also deemed extremely attractive as anode materials for batteries by virtue of their abundant internal active sites. However, their unclear redox mechanisms at lower potential severely restricts PBAs anodes to realize stable cycling performances. In this work, low-cost KxMn[Fe(CN)6]y□1−y·nH2O with diverse H2O content and structure are harvested via controlling the crystallization rate. It is firstly discovered that the KxMn[Fe(CN)6]y anodes undergoes multi-electron conversion reactions involving the fracture and recombination of MnN bonds, while the stronger FeC bond is preserved. Then, it is confirmed that weaker MnN bond which need to be prepared at a faster crystallization rate is more conducive to the fast electrochemical kinetics of the reversible conversion paths. Accordingly, the K0.09Mn[Fe(CN)6]0.66□0.34·3.40 H2O with higher H2O content and weaker MnN bond achieve the best Li-storage performances, exhibiting a reversible capacity of 480 mAh g−1 at a high current density of 1 A g−1 and considerable cycling stability exceeding 1000 cycles. The results also suggest that interstitial H2O could be beneficial for the better cycling stability of the KxMn[Fe(CN)6]y anodes. This work can provide new insights for the rational design of novel conversion anodes with high reversible capacity and superior cycling stability.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
A Novel Organic "Polyurea" Thin Film for Ultralong-Life Lithium-Metal Anodes via Molecular-Layer Deposition

Yipeng Sun,Yang Zhao,Jiwei Wang,Jianneng Liang,Changhong Wang,Qian Sun,Xiaoting Lin,Keegan R Adair,Jing Luo,Dawei Wang,Ruying Li,Mei Cai,Tsun-Kong Sham,Xueliang Sun

DOI: https://doi.org/10.1002/adma.201806541

Abstract:Metallic Li is considered as one of the most promising anode materials for next-generation batteries due to its high theoretical capacity and low electrochemical potential. However, its commercialization has been impeded by the severe safety issues associated with Li-dendrite growth. Non-uniform Li-ion flux on the Li-metal surface and the formation of unstable solid electrolyte interphase (SEI) during the Li plating/stripping process lead to the growth of dendritic and mossy Li structures that deteriorate the cycling performance and can cause short-circuits. Herein, an ultrathin polymer film of "polyurea" as an artificial SEI layer for Li-metal anodes via molecular-layer deposition (MLD) is reported. Abundant polar groups in polyurea can redistribute the Li-ion flux and lead to a uniform plating/stripping process. As a result, the dendritic Li growth during cycling is efficiently suppressed and the life span is significantly prolonged (three times longer than bare Li at a current density of 3 mA cm-2 ). Moreover, the detailed surface and interfacial chemistry of Li metal are studied comprehensively. This work provides deep insights into the design of artificial SEI coatings for Li metal and progress toward realizing next-generation Li-metal batteries.
Realizing Superior Prussian Blue Positive Electrode for Potassium Storage Via Ultrathin Nanosheet Assembly

Mingsheng Qin,Wenhao Ren,Jiashen Meng,Xuanpeng Wang,Xuhui Yao,Yajie Ke,Qi Li,Liqiang Ma

DOI: https://doi.org/10.1021/acssuschemeng.9b01454

IF: 8.4

2019-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Prussian blue analogues have attracted growing attention as the positive electrode materials in rechargeable potassium-ion batteries (KIBs) due to the intrinsic open frameworks and high theoretical capacities. However, the bulk synthesized Prussian blue which is accompanied by aggregation inevitably results in the limited K+ ion mobility and suppressed potassium storage performance. In this work, ultrathin nanosheet-assembled hierarchical Prussian blue materials (K1.4Fe4[Fe(CN)(6)](3)) are synthesized via a facile dissolution-recrystallization strategy. On the strength of this architecture, the positive electrode displays both high rate (71 and 24.9 mAh g(-1) at 50 and 600 mA g(-1)) and long life-span properties (75.2% of the primal capacity retained after 100 cycles) for potassium storage. The enhanced diffusion kinetics and structural stability are further demonstrated through the galvanostatic intermittent titration technique analysis and ex-situ X-ray diffraction. Our work provides a new nanostructuring strategy for improving the potassium storage in intercalation electrodes.
Scalable Synthesis of Pore-Rich Si/C@C Core–Shell-Structured Microspheres for Practical Long-Life Lithium-Ion Battery Anodes

Weili An,Peng He,Zongzhou Che,Chengmao Xiao,Eming Guo,Chunlei Pang,Xueqin He,Jianguo Ren,Guohui Yuan,Ning Du,Deren Yang,Dong-Liang Peng,Qiaobao Zhang

DOI: https://doi.org/10.1021/acsami.1c22656

2022-02-17

Abstract:Silicon/carbon (Si/C) composites have rightfully earned the attention as anode candidates for high-energy-density lithium-ion batteries (LIBs) owing to their advantageous capacity and superior cycling stability, yet their practical application remains a significant challenge. In this study, we report the large-scale synthesis of an intriguing micro/nanostructured pore-rich Si/C microsphere consisting of Si nanoparticles tightly immobilized onto a micron-sized cross-linked C matrix that is coated by a thin C layer (denoted P-Si/C@C) using a low-cost spray-drying approach and a chemical vapor deposition process with inorganic salts as pore-forming agents. The as-obtained P-Si/C@C composite has high porosity that provides sufficient inner voids to alleviate the huge volume expansion of Si. The outer smooth and robust C shells strengthen the stability of the entire structure and the solid-electrolyte interphase. Si nanoparticles embedded in a microsized cross-linked C matrix show excellent electrical conductivity and superior structural stability. By virtue of structural advantages, the as-fabricated P-Si/C@C anode displays a high initial Coulombic efficiency of 89.8%, a high reversible capacity of 1269.6 mAh g-1 at 100 mA g-1, and excellent cycle performance with a capacity of 708.6 mAh g-1 and 87.1% capacity retention after 820 cycles at 1000 mA g-1, outperforming the reported results of Si/C composite anodes. Furthermore, a low electrode swelling of 18.1% at a high areal capacity of 3.8 mAh cm-2 can be obtained. When assembled into a practical 3.2 Ah cylindrical cell, extraordinary long cycling life with a capacity retention of 81.4% even after 1200 cycles at 1C (3.2 A) and excellent rate performance are achieved, indicating significant advantages for long-life power batteries in electric vehicles.

materials science, multidisciplinary,nanoscience & nanotechnology
Nano-Si/C microsphere with hollow double spherical interlayer and submicron porous structure to enhance performance for lithium-ion battery anode

Hedong Chen,Shenggong He,Xianhua Hou,Shaofeng Wang,Fuming Chen,Haiqing Qin,Yingchun Xia,Guofu Zhou

DOI: https://doi.org/10.1016/j.electacta.2019.04.170

IF: 6.6

2019-07-01

Electrochimica Acta

Abstract:Silicon (Si) applied for lithium-ion battery anode is of immense prospect due to high theoretical capacity, non-toxic, abundant reserves and low-cost. But the electrode materials, maintaining stable structure during repeated discharge/charge processes, need to be explored, which can realize the long-life. To address this problem, we utilized hollow porous pollen carbon microsphere derived from biomass as hard template to accommodate nano-Si. The hollow porous carbon@nano-Si@graphene sheets (HPC@nano-Si@GS) microspheres with hollow double spherical interlayer and submicron porous structure have been successfully synthesized via a simple and green environment-protecting wet-chemical method. We decorate nano-Si with silane coupling agent which can bind hollow porous pollen and graphene oxide, realizing the strong fixation and protection of nano-Si. Furthermore, the surface submicron mesh pores and HPC microsphere provide enough buffer space to cushion the huge volume expansion for nano-Si, enhancing the cyclic stability. Finally, graphene wrapping on the surface of HPC@nano-Si@GS microspheres can protect nano-Si very well, further stabilizing the composite structure. Nano-Si particles were accommodated in the HPC microsphere with submicron pores and then coated by wrinkled graphene sheets, to form the strong structure with hollow double spherical interlayer. A series of electrochemical tests indicate that prepared HPC@nano-Si@GS microspheres with hollow porous carbon structure exhibit outstanding electrochemical properties.

electrochemistry
High‐Entropy Prussian Blue Analogues Enable Lattice Respiration for Ultra‐Stable Aqueous Aluminum‐Ion Batteries

Kai Du,Yujie Liu,Yiqi Zhao,Hui Li,Hexiong Liu,Chunhao Sun,Mingshan Han,Tianyi Ma,Yuxiang Hu

DOI: https://doi.org/10.1002/adma.202404172

IF: 29.4

2024-05-13

Advanced Materials

Abstract:Aqueous aluminum ion batteries (AAIBs) hold significant potential for grid‐scale energy storage owing to their intrinsic safety, high theoretical capacity, and abundance of aluminum. However, the strong electrostatic interactions and delayed charge compensation between high‐charge‐density aluminum ions and the fixed lattice in conventional cathodes impede the development of high‐performance AAIBs. To address this issue, we introduce, for the first time, high‐entropy Prussian blue analogs (HEPBAs) as cathodes in AAIBs with unique lattice tolerance and efficient multipath electron transfer. Benefiting from the intrinsic long‐range disorder and robust lattice strain field, HEPBAs enable the manifestation of the lattice respiration effect and minimize lattice volume changes, thereby achieving one of the best long‐term stabilities (91.2% capacity retention after 10,000 cycles at 5.0 A g−1) in AAIBs. Additionally, the interaction between the diverse metal atoms generates a broadened d‐band and reduced degeneracy compared with conventional PBAs, which enhances the electron transfer efficiency with one of the best rate performance (79.2 mAh g−1 at 5.0 A g−1) in AAIBs. Furthermore, exceptional element selectivity in HEPBAs with unique cocktail effect could facile tune electrochemical behavior. Overall, the newly developed HEPBAs with a high‐entropy effect exhibit promising solutions for advancing AAIBs and multivalent‐ion batteries. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter
Promoting nitrogen-doped porous phosphorus spheres for high-rate lithium storage

Zunbin Duan,Xiaoxiao Feng,Gengchang Lai,Danni Liu,Xiaoyi Zhang,Haoyu Wang,Shuen Chen,Xingchen He,Zihui Liu,Liping Tong,Huaiyu Wang,Xue-Feng Yu,Jiahong Wang

DOI: https://doi.org/10.1016/j.jcis.2024.09.218

2024-09-28

Abstract:Phosphorus anode has shown great potential for the high-rate and high-energy-density lithium-ion batteries. Nevertheless, it still suffers from possible electrode cracking, ion-transport restrictions, and active-particle decomposition resulting from repeated alloying/de-alloying. To address the aforementioned issues, a nitrogen-doped flower-like porous phosphorus (f-P) sphere has been developed. The abundant micro-mesopores facilitate ion diffusion and enhance the internal bonding strength of the electrode. Concurrently, the doped nitrogen promotes the generation of a favorable solid electrolyte interphase constructed by fast-ion-conductors. As a result, the f-P exhibits a high-rate capacity of 735mAh g-1 at 20 A g-1 and maintains high Coulombic efficiencies over 900 cycles at 10 A g-1. Furthermore, coin full-cells comprising the f-P anode and lithium cobalt oxide cathode demonstrate stable operation at a high current density of 6 mA cm-2. The combination of a porous structure and doping strategy represents a viable approach for strengthening the durability of electrodes and optimizing the ion transport kinetics of advanced alloy anode materials.
Facile Synthesis of Pre-Lithiated LiTiO2 Nanoparticles for Quick Charge and Long Lifespan Anode in Lithium-Ion Batteries

Chengwei Lu,Ruyi Fang,Yongping Gan,Xinping He,Zhen Xiao,Hui Huang,Jun Zhang,Xinhui Xia,Wenkui Zhang,Yang Xia

DOI: https://doi.org/10.1021/acsami.3c16525

IF: 9.5

2023-01-01

ACS Applied Materials & Interfaces

Abstract:Titanium dioxide (TiO2) has been widely used as an alternative anodic material for lithium-ion batteries (LIBs) due to its ultrahigh capacity retention and long cycle lifespan. However, the restriction of lithium insertion, intrinsically poor electronic conductivity, and sluggish lithium ionic kinetics of bulk TiO2 hinder their specific capacity and rate performance. Herein, LiTiO2 nanoparticles (NPs) are synthesized via a facile ball milling method by the reaction of anatase TiO2 with LiH. The as-prepared LiTiO2 NPs have strong structural stability and a "zero strain" effect during the repeated intercalation/deintercalation, even at low potential. As anodic materials for LIBs, LiTiO2 NPs exhibit a superior rate performance of similar to 100 mA h g(-1) at 10C (3350 mA g(-1)) with a capacity retention of 100% after 1000 cycles, which is 5 times higher than that of the original commercial anatase TiO2 powder. The higher specific capacity of LiTiO2 NPs is attributed to the increased conversion of Ti3+ to Ti2+ on the porous surface of LiTiO2 NPs, which provides a more capacitive contribution. This study not only provides a new fabrication approach toward Ti-based anodes for ultrafast LIBs but also underscores the potential importance of embedding lithium into transition metal oxides as a strategy for boosting their electrochemical performance.
Lithium Storage Performance Boosted via Delocalizing Charge in Zn x Co 1− x PS 3 /CoS 2 of 2D/3D Heterostructure

Hou‐Yang Zhong,Xian Lu,Yu Zhong,Yi Zhao,Xin‐Ming Liu,Dan‐Hong Cheng,Xiao‐Ying Huang,Ke‐Zhao Du,Xiao‐Hui Wu

DOI: https://doi.org/10.1002/smll.202104295

IF: 13.3

2021-10-29

Small

Abstract:A promising anode material consisting of bimetallic thiophosphate Znx Co1- x PS3 and CoS2 with 2D/3D heterostructure is designed and prepared by an effective chemical transformation. Density functional theory calculations illustrate that the Zn2+ can effectively modulate the electrical ordering of Znx Co1- x PS3 on the nanoscale: the reduced charge distribution emerging around the Zn ions can enhance the local built-in electric field, which will accelerate the ions migration rate by Coulomb forces and provide tempting opportunities for manipulating Li+ storage behavior. Moreover, the merits of the large planar size enable Znx Co1- x PS3 to provide abundant anchoring sites for metallic CoS2 nanocubes, generating a 2D/3D heterostructure with a strong electric field. The resultant Znx Co1- x PS3 /CoS2 can offer the combined advantages of bimetallic alloying and heterostructure in lithium storage applications, leading to outstanding performance as an anode material for lithium-ion batteries. Consequently, a high capacity of 794 mA h g-1 can be retained after 100 cycles at 0.2 A g-1 . Even at 3.0 A g-1 , a satisfactory capacity of 465 mA h g-1 can be delivered. The appealing alloying-heterostructure and electrochemical performance of this bimetallic thiophosphate demonstrate its great promise for applications in practical rechargeable batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High-entropy prussian blue analogs with 3D confinement effect for long-life sodium-ion batteries

Yichao Wang,Ning Jiang,Cheng Yang,Jiahe Liu,Shouyu Sun,Xinyu Wang,Jianhua Yang,Yu Liu

DOI: https://doi.org/10.1039/d3ta07671g

IF: 11.9

2024-02-06

Journal of Materials Chemistry A

Abstract:Prussian blue analogs (PBAs) have been regarded as competitive cathode materials for sodium-ion batteries due to their low-cost and easy synthesis. Nevertheless, the practical application of PBAs is limited by their intrinsic poor electronic conductivity and structural degradation. Herein, a unique high entropy (HE) Prussian blue Analogs encapsulated by three-dimensional carbon (HE-PBAs@C) was for the first time designed and synthesized by combining the merits of HE and 3D confinement effect originating from carbon wrapping (CW). The HE strategy guarantees the inherent stability of PBAs and promotes accelerated Na + diffusion, while the CW technique serves a dual purpose by enhancing electronic conductivity and mitigating lattice distortion through the 3D confinement effect. As a result, the HE-PBAs@C cathode exhibits impressive electrochemical performance, including high specific capacity (120.2 mA h g −1 at 10 mA g −1 ), outstanding rate performance (73.0 mA h g −1 at 4 A g −1 ), excellent capacity retention (80.1% after 4000 cycles at 2 A g −1 ) and unprecedented stability in the ambient environment. Furthermore, the HE-PBAs@C cathode demonstrates excellent compatibility with both hard carbon (700 cycles 95.4%) and NaTi 2 (PO 4 ) 3 (1000 cycles 98.1%) anodes in full cells, highlighting its promising potential for large-scale energy storage applications.

materials science, multidisciplinary,chemistry, physical,energy & fuels

Pitaya-like Microspheres Derived from Prussian Blue Analogues As Ultralong-Life Anodes for Lithium Storage

Correction: Pitaya-like Microspheres Derived from Prussian Blue Analogues As Ultralong-Life Anodes for Lithium Storage

Achieving Long-Life Prussian Blue Analogue Cathode for Na-ion Batteries Via Triple-Cation Lattice Substitution and Coordinated Water Capture

Pomegranate-like silicon-based anodes self-assembled by hollow-structured Si/void@C nanoparticles for Li-ion batteries with high performances

Pomegranate-like CoO@nitrogen-doped Carbon Microspheres with Outstanding Rate Behavior and Stability for Lithium Storage

3D pomegranate-like structured Si@void@Ni@C microspheres as high-performance anode in lithium-ion batteries

Accelerated Capacity and Cycling Performance via Facile Instantaneous Precipitation Induced Amorphization for Lithium‐Ion Batteries

Sb2O4 @PPy core-shell nanospheres as anode materials for lithium-ion storage

Structural Engineering of Prussian Blue Analogues Enabling All-Climate and Ultralong Cycling Sodium-Ion Batteries

Ultrasmall Co3O4 nanoparticles as a long-lived high-rate lithium-ion battery anode.

Alloyed BiSb Nanoparticles Confined in Tremella‐Like Carbon Microspheres for Ultralong‐Life Potassium Ion Batteries

Rational design of Prussian blue analogues as conversion anodes for lithium-ion batteries with high capacity and long cycle life

A Novel Organic "Polyurea" Thin Film for Ultralong-Life Lithium-Metal Anodes via Molecular-Layer Deposition

Realizing Superior Prussian Blue Positive Electrode for Potassium Storage Via Ultrathin Nanosheet Assembly

Scalable Synthesis of Pore-Rich Si/C@C Core–Shell-Structured Microspheres for Practical Long-Life Lithium-Ion Battery Anodes

Nano-Si/C microsphere with hollow double spherical interlayer and submicron porous structure to enhance performance for lithium-ion battery anode

High‐Entropy Prussian Blue Analogues Enable Lattice Respiration for Ultra‐Stable Aqueous Aluminum‐Ion Batteries

Promoting nitrogen-doped porous phosphorus spheres for high-rate lithium storage

Facile Synthesis of Pre-Lithiated LiTiO<sub>2</sub> Nanoparticles for Quick Charge and Long Lifespan Anode in Lithium-Ion Batteries

Lithium Storage Performance Boosted via Delocalizing Charge in Zn x Co 1− x PS 3 /CoS 2 of 2D/3D Heterostructure

High-entropy prussian blue analogs with 3D confinement effect for long-life sodium-ion batteries