Abstract:A reliable non-destructive testing technique that enables effective detection and quantification of defects within safety-critical curved structures is highly demanded both in manufacture and service. Conventional Ultrasonic Testing (UT) methods usually adopt planar ultrasonic probes and it is preferable to adjust the probe axis direction perpendicular to the curved surface, because both the transmitting and receiving sensitivities in the probe axis direction are the highest. This paper proposes a new UT method using a hemispherical-omnidirectional ultrasonic probe. This probe has an omnidirectional directivity pattern and can cover curved surfaces with normal incident ultrasounds at different scan positions without the necessity of adjusting the probe attitude and position to follow the curved surface profiles. A surface reconstruction algorithm is firstly proposed to estimate curved surface profiles, which is based on a fast-imaging algorithm for ultra-wideband radar called the Shape Estimation Algorithm based on the Boundary scattering transform and Extraction of Directly scattered waves (SEABED). This method only uses surface reflection echoes, and thus can inspect curved structures without knowing the surface profiles a prior. Further, the Synthetic Aperture Focusing Technique (SAFT) is implemented to generate a focused image of internal defects by performing delay-and-sum beamforming on defect echoes based on the reconstructed surface profile. The proposed UT method is eventually experimentally verified on a curved plexiglass specimen with 29.4 mm surface curvature radius containing three ϕ 3.5 mm Side Drilled Holes (SDHs) at different depths. Results show that compared with the planar ultrasonic probe, the reconstructed surface profile via SEABED is much wider and accurate with a relative error ≤ 0.47%. All SDHs are not only clearly positioned with relative errors ≤ 7.43%, but also can be accurately quantified from the curvature radius of SDH indications in the SAFT images with relative errors ≤ 8.60%. This work proves that the UT method based on the hemispherical-omnidirectional ultrasonic probe can emerge as a promising technique to inspect curved structures with high efficiency and accuracy, which has great potential in practical applications.

Ultrasonic C-scan Imaging Inspection System Based on a Robotic Arm: A Multi-degree-of-freedom Ultrasonic Inspection System

Research of Integrated Ultrasonic Auto Detecting Method on Curved Surfaces

Probe’s Auto-alignment in Curved Components Ultrasonic Survey

Research on Ultrasonic Detection of Complex Surfaces

Compliant Joint Based Robotic Ultrasound Scanning System for Imaging Human Spine

Panoramic Optical Annular Staring Inspection System for Evaluating the Inner Surface of a Pipe

Robot-Assisted Track-Scan Imaging Approach with Multiple Incident Angles for Complexly Structured Parts

Inverse Kinematic Analysis and Evaluation of A Robot for Nondestructive Testing Application

Curved Path Planning Based on 3D Vision Water Immersion Ultrasonic Nondestructive Testing

On The Ultrasonic Inspection Robot For The Complex Shape Components

Automatic ultrasound scanning robotic system with optical waveguide-based force measurement

Ultrasonic Non-Destructive Testing System of Semi-Enclosed Workpiece with Dual-Robot Testing System

A Flexible 3d Laser Scanning System Using A Robotic Arm

Motion Control System of Ultrasonic C-Scan Testing Equipment for Composite Materials

Detection of Ultrasonic C-scan Imaging System Based on Integrated Instrument

Robotic Ultrasonic Measurement of Residual Stress in Complex Curved Surface Components

Scanning Path Planning of Ultrasonic Testing Robot Based on Deep Image Processing

Efficient data acquisition and reconstruction for air-coupled ultrasonic robotic NDE

Ultrasonic inspection of curved structures with a hemispherical-omnidirectional ultrasonic probe via linear scan SAFT imaging

Kinematic analysis and simulation of ultrasonic testing manipulator

A Three-Dimensional Quasi-static Ultrasound Strain Imaging System Using A 6-Dof Robotic Arm