Abstract:Absolute distance measurement with dual femtosecond comb lasers has advantages of wide-range, high-accuracy and fast speed. It combines time-of-flight and interferometric measurement. The novelty of ranging method leads to new challenges in designing the data acquisition and processing hardware system. Currently there are no available real-time data processing system for dual-comb ranging. This paper introduces our recent progress on designing and implementing such a platform. Our platform mainly contains four different function modules. First, a clock module that accept a 250MHz maximum reference clock input was introduced to generate the sample clock for A/D converter, and the module’s output clock can be delayed up to 20ns with a resolution of 714ps. Second, a high-speed data acquisition module with a 14-bit resolution and a 125 MSPS maximum sample rate was designed to convert the analog laser pulse signal to digital signal. Third, we built a real-time data processing module that allows an input of 16-bit data in the FPGA to calculate the distance from the digital signal within 83us. Finally, a data transmission module based on a 128MB DDR SDRAM and USB2.0 was added so that we can easily debug the platform in the PC. The performance of our system is evaluated in real-time. The test bench consists of two femtosecond laser sources, an optical fiber interferometer and our data processing system. The repetition frequencies of the two combs are around 50MHz, with frequency difference of 2.5kHz. The center wavelength of laser pulses is 1560nm. The target distance is from 0m to 3m. The experimental results show that our system can output measurement results at the rate of 2500 pts/s, and the measurement deviation is less than 10um.

Design of a High Speed dToF Ranging System

Design of an Autonomous and Controllable Laser Ranging System

A High-Precision Laser Displacement Measurement System

Optimization of System Design and Calibration Algorithm for SPAD-Based LiDAR Imager

Wide Dynamic Laser Ranging Based on Diode Laser and Photon-Counting Techniques

Design and implementation of embedded signal processing system based on pulsed laser ranging technology

Intelligent Measuring System for Performance Parameters of Laser Range Finder

A dToF Ranging Sensor with Accurate Photon Detector Measurements for LiDAR Applications

[Benign tectal tumors: clinical and neuroradiological correlations].

Design and Realization of the Timing System of Pulsed Laser Range Finder

Coded-pulse-bunch-laser-based Single-Photon Lidar for Fast Long-Distance Ranging.

A wide dynamic range laser rangefinder with cm-level resolution based on AGC amplifier structure

Time-Of-Flight Measurement in Self-Triggering Pulsed Laser Ranging

Cation-dependent nonlinear optical behavior in an octupolar 3D anionic metal-organic open framework.

Research and Application on Optic-electronic Ranging Technology for Close Quarters

Implementation of a Data Processing Platform for Real-Time Distance Measurement with Dual-Comb Lasers

High precision laser ranging by time-of-flight measurement of femtosecond pulses

High-precision pulsed laser ranging using CMOS single-photon avalanche diodes

Multi-laser Source Interference Suppression Using Time Coding Method for SPAD Based Flash DToF Systems

Design of a Self-referenced Laser Scanning and Ranging System

High-Precision GRO-Based ROIC Adopting Sliding Scale Average Method for SPAD Array