Abstract:The reactive extrusion of maleic anhydride grafted polypropylene (PP-g-MAH) with ethylenediamine (EDA) as coupling agent was carried out in a co-rotating twin-screw extruder to produce long chain branched polypropylene (LCBPP). Part of PP-g-MAH was replaced by maleic anhydride grafted high-density polyethylene (HDPE-g-MAH) or linear low-density polyethylene (LLDPE-g-MAH) to obtain hybrid long chain branched (LCB) polymers. Compared with the linear PP, PE and their blends, the LCB polyolefins exhibit excellent dynamic shear and transient extensional rheological characteristics such as increased dynamic modulus, higher low-frequency complex viscosity, significantly enhanced melt strength and strain-hardening behaviors. LCB polymers also have higher tensile strength, tensile modulus, impact strength and lower elongation at break than linear polymer and their blends. Supercritical carbon dioxide (scCO2) was introduced in the reactive extrusion process. With the presence of scCO 2, the motor current of twin extruder was decreased and LCB polyolefins with lower MFR, higher complex viscosity and increased tensile strength and modulus were obtained. This indicates that the application of scCO2 can reduce the viscosity of melt in extruder, enhance the diffusion of reactive species, facilitate the reaction between functional groups, and increase the LCB density. The foaming behavior of both linear and LCB polyolefins were studied. The results show that cellular materials produced from the LCB polyolefins have higher weight reduction, smaller cell size and better mechanical properties than those produced from the linear polymers.

Supercritical Carbon Dioxide‐assisted Dispersion of Sodium Benzoate in Polypropylene and Crystallization Behavior of the Resulting Polypropylene

Effect of Supercritical Carbon Dioxide-Assisted Nano-Scale Dispersion of Nucleating Agents on the Crystallization Behavior and Properties of Polypropylene

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Study On Crystallization Behaviour Of Polypropylene Containing Nano-Calcium Carbonate And Organic Nucleating Agents

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Crystallization and Mechanical Properties of Polypropylene Filled with Sio2 Nanoparticles

Dispersion Polymerization in Supercritical CO2

Study of the Crystallization Behaviors of Isotactic Polypropylene with Sodium Benzoate As A Specific Versatile Nucleating Agent

Better scCO2 Foaming of Polypropylene via Earlier Crystallization with the Addition of Composite Nucleating Agent

Supercritical Carbon Dioxide‐induced Melting Temperature Depression and Crystallization of Syndiotactic Polypropylene

Research and Application of Sodium Benzoate as Nucleating Agent of Thermoplastic Materials

Effect of surfactant assisted β-nucleating agent self-assembly on the crystallization of polypropylene

The Formation of Γ‐crystal in Long‐chain Branched Polypropylene under Supercritical Carbon Dioxide

Crystallization Behavior and Mechanical Properties of Polypropylene Copolymer by in Situ Copolymerization with a Nucleating Agent And/or Nano‐calcium Carbonate

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Ultrafine dispersion of a phosphate nucleating agent in a polypropylene matrix via the microemulsion method

Preliminary Study on the Characteristics of Isotactic Polypropylene with Nucleating Agent Swollen by Supercritical Carbon Dioxide

Dual Role of PDMS on Improving Supercritical CO2 Foaming of Polypropylene: CO2-philic Additive and Crystallization Nucleating Agent

Effect of Nanoparticle Surface Treatment on Nonisothermal Crystallization Behavior of Polypropylene/Calcium Carbonate Nanocomposites

Promotion of Zeolite As Dispersion Support for Properties Improvement of Α Nucleating Agent in Polypropylene

Non-isothermal crystallization behavior of polypropylene with nucleating agents and nano-calcium carbonate