Selection of Heat Exchangers and Their Components

R. K. Shah,Dušan P. Sekulić

DOI: https://doi.org/10.1002/9780470172605.ch10

2003-01-01

Abstract:This chapter contains sections titled: Selection Criteria Based on Operating Parameters General Selection Guidelines for Major Exchanger Types Some Quantitative Considerations Summary References Review Questions Problems

What problem does this paper attempt to address?

Heat Exchanger Fundamentals: Analysis and Theory of Design

Ahmad Fakheri

DOI: https://doi.org/10.1007/978-3-319-26695-4_19

2018-01-01

Abstract:This chapter provides an overview of how different heat exchanger types, problems, and networks are analyzed. Heat exchangers are categorized by shape, flow arrangement, area to volume ratio, and channel size. The problem type depends on what information is available and what is sought. The heat exchanger networks can be arranged in numerous ways. For analyzing heat exchangers, three methods, LMTD correction factor, ε-NTU, and heat exchanger efficiency, are reviewed in this chapter. In their basic form, all three methods are based on the first law of thermodynamics, using average fluid properties and transversally averaged temperature, considering only axial temperature change. Since all three methods use the same equations and are based on the same assumptions, they differ only in the way that the results are presented. Historically, the choice of the method used depended on the type of problem under consideration; however using computers and equations solvers, each of the methods can be used to solve any heat exchanger problem, as long as the expressions for LMTD correction factors, ε-NTU relations, or the heat exchanger efficiency expressions are available. The chapter also provides an overview of the compact heat exchangers as well as microchannel heat exchangers.
A Review on Study of Shell and Tube Heat Exchanger

Shubham M Patil,Akash Y Shelke,Tushar S Kamble,Dr. Pratibha R Gawande,Dr. Meera T Sose

DOI: https://doi.org/10.32628/ijsrst229218

2022-03-20

International Journal of Scientific Research in Science and Technology

Abstract:Heat exchangers are used in a variety of industrial and technical settings. The design of heat exchangers is fairly sophisticated, since it necessitates an accurate study of heat transfer rate and pressure drop estimates, as well as considerations like as long-term performance and cost. Whenever heat transfer inserts are employyed, Along with the rise in heat transfer rate, the pressure drop increases as well. The pressure has risen.Energy conservation is critical for both industrial development and environmental impact reduction. Because of current energy prices, the need for energy conservation is rising. More resourceful gadgets can help reduce energy costs. In the refrigeration, automotive, chemical, and process sectors, heat exchangers are the most significant device. As a result, there is a demand in the industrial sector for heat exchangers that are less expensive, more efficient, and smaller. Inserts in channels are widely employed as part of a passive heat transfer augmentation technique.
A Review on Design and optimization of shell and tube heat exchanger by varying parameters

Shiv Kumar,Dharamveer Singh

DOI: https://doi.org/10.24113/ijoscience.v6i6.298

2020-06-13

SMART MOVES JOURNAL IJOSCIENCE

Abstract:In recent years, thermal control systems performance has improved in numerous ways due to developments in control theory and information technology. Efforts have been made to produce more efficient heat exchangers by employing various methods of heat transfer enhancement. An increase in heat exchanger performance can lead to a more economical design of heat exchanger which can help to make energy, material & cost savings related to a heat exchange process. Compact heat exchangers (CHEs) technologies are expected to be one of the solutions for the new generation heat exchanger. In this paper are presented of the compact heat exchanger, Plate-fin heat exchanger, and Printed Circuit Heat Exchanger. And computation fluid dynamic is used which offers an alternative to the quick and inexpensive solution for the design and optimization of compact heat exchangers.
Shell and Tube Heat Exchanger

D. Ameta

2017-08-09

Abstract:Heat exchangers are one of the mostly used devices in the industries to regulate efficient transfer heat in industrial process applications. One can realize their importance just by the fact that any process which involves heating, cooling, boiling, condensation or evaporation will require a heat exchanger for these functions. This research paper highlights Shell and Tube Heat Exchangers, their design specifications, thermodynamic aspects and industrial applications.

Engineering,Materials Science
Thermodynamic and hydraulic design characteristics of the fin tube heat exchanger

P.S. Arshi Banu,Balaji Dhanapal,T. Mathevan Pillai,B. Chellappa,Ravishankar Sathyamurthy

DOI: https://doi.org/10.1016/j.matpr.2022.04.853

2022-01-01

Materials Today: Proceedings

Abstract:Heat exchangers are crucial devices that are used to exchange heat between two different fluids: one that is hot and one that is cold. Amongst them, finned tube heat exchangers play a vital role in today’s thermal industry. Due to the increased surface area of the tubes' outer surface (or fins) when utilizing finned tube heat exchangers, the heat transfer rate may be improved as a consequence of the increased surface area of the fins. It is often referred to as a compact heat exchanger in order to highlight the comparatively large heat transfer surface area to volume ratio of the exchanger. They have many vital applications in the field of refrigeration, air conditioning, IC engines, and power plants. The fin and tube heat exchanger has been analyzed for three different cases in the present study: preheater, condenser, and evaporator. The Engineering Equation Solver (EES) software has been used to analyze the heat exchanger for the various thermal, hydrodynamic, and design parameters. Results have been plotted by comparing the various thermal parameters such as overall and inside heat transfer coefficient, Nusselt number, and rate of heat transfer with respect to Reynolds number. Similarly, the hydrodynamic parameters such as Colburn factor, friction factor, and the design parameters such as the number of fins and fin spacing.
Review on Factors Affecting Efficiency of Shell and Tube Heat Exchanger

DOI: https://doi.org/10.46632/jacp/3/1/3

2024-03-07

Abstract:Heat exchanger is one amongst promising thermal device in which heat transfer takes place between hot fluid and cold fluid. Among various classifications of warmth exchangers, the main focus was shown by researchers on indirect contact type compact heat exchangers. Among them the shell and tube device belongs to fluid to fluid type heat transfer device. Main applications of shell and tube device feed device in process industries, refineries, chemical plants and power plants. Usually the analysis of shell and tube heat exchangers are divided into two parts namely shell side and tube side analysis. Shell side analysis is easy and doesn't involve much modification. Whereas the tube side analysis is complex and it's done by varying baffle design and elevation with regard to arrangements of tubes. The most disadvantage of shell and tube device is pressure drop which occur at the end of tubes. To overcome this problem, drilled cylindrical copper block has been introduced to switch the tube part through which the new fluid flows and therefore the cold fluid is circulated through the shell. With this design modification, the effectiveness, mass rate, overall heat transfer co efficient are simulated and analysed.
A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks

xiaohong han,qin wang,younggil park,c t joen,andrew d sommers,anthony m jacobi

DOI: https://doi.org/10.1080/01457632.2012.659613

IF: 2.3

2012-01-01

Heat Transfer Engineering

Abstract:Recent advances in manufacturing methods open the possibility for broader use of metal foams and metal matrix composites (MMCs) for heat exchangers, and these materials can have tailored material properties. Metal foams in particular combine a number of interesting properties from a heat exchanger's point of view. In this paper, the material properties of metal foams and MMCs are surveyed, and the current state of the art is reviewed for heat exchanger applications. Four different applications are considered: liquid-liquid, liquid-gas, and gas-gas heat exchangers and heat sinks. Manufacturing and implementation issues are identified and discussed, and it is concluded that these materials hold promise both for heat exchangers and heat sinks, but that some key issues still need to be solved before broad-scale application is possible.
Design, Fabrication and Performance Evaluation of a Shell and Tube Heat Exchanger for Practical Application

Bashiru Abdulmumuni,Adedeji Mathew Ayoade,Ologunye Opeyemi Buhari,Azeez Rasheed Olatunde,Fanifosi Johnson Olaniyi

DOI: https://doi.org/10.24018/ejers.2020.5.8.1997

2020-08-13

European Journal of Engineering Research and Science

Abstract:A heat exchanger is a device used to transfer thermal energy between two or more fluids, at different temperatures in thermal contact. This paper focuses on a shell-and-tubes heat exchanger that involves two fluids (hot water and cold water) in contact with each other while the cold water flows through the tubes and hot water through the shell. Heat exchangers have special and practical applications in the feed water cooler in the process industries, power plants, chemical plants, refineries, process applications as well as refrigeration and air conditioning industry. The design calculations were carried out to determine the specifications of essential parameters for the development of the heat exchanger, data generated from the theoretical formulae were used to fabricate the heat exchanger using some locally available and durable materials, and the performance of the system was evaluated. Some of the parameters evaluated include heat duty, capacity ratio, effectiveness, overall heat transfer coefficient, and fouling factor. The heat exchanger was tested under various flow conditions and the results obtained were as follows; cold water inlet temperatures of (26, 26, 26, 27and 27) oC increased to (59, 44, 39, 47 and 35) oC after (10, 71⁄2, 61⁄2 8, and 6) minutes and the hot water temperatures decreased from (100, 80, 75, 87 and 73) oC to (73, 59, 55, 62 and 50) oC, respectively. The design data and test data were compared in terms of the heat duty, capacity ratio, effectiveness, overall heat transfer coefficient, and fouling factor, the deviation is found to be 22.87%, 13.99%, 8.98%, 43.30%, and 43.30% respectively. The results obtained proved that the heat exchanger was effective, reliable and provides a good technical approach to evaluate the thermal performance of the heat exchanger and useful in conducting heat and mass transfer practical in thermodynamics laboratory.
A Review on the Thermal-Hydraulic Performance and Optimization of Compact Heat Exchangers

Gaoliang Liao,Zhizhou Li,Feng Zhang,Lijun Liu,E Jiaqiang,Jiaqiang E

DOI: https://doi.org/10.3390/en14196056

IF: 3.2

2021-09-23

Energies

Abstract:Heat exchangers play an important role in power, the chemical industry, petroleum, food and many other industrial productions, while compact heat exchangers are more favored in industrial applications due to their high thermal efficiency and small size. This paper summarizes the research status of different types of compact heat exchangers, especially the research results of heat transfer and pressure drop of printed circuit heat exchangers, so that researchers can have an overall understanding of the development of compact heat exchangers and get the required information quickly. In addition, this paper summarizes and analyzes several main working fluids selected in compact heat exchangers, and puts forward some discussions and suggestions on the selection of working fluids. Finally, according to the existing published literature, the performance evaluation indexes of compact heat exchangers are summarized and compared, which is convenient for developers and researchers to better grasp the design direction.

energy & fuels
Heat Exchanger Selection for Thawing Water Recovery of Aquatic Products

Yang Jiang

2015-01-01

Abstract:Considering the thawing water recovery of aquatic products,both tubular and plate heat exchangers were compared; and the plate heat exchanger's working principle and application range were introduced,including both fouling and corrosion matters which troubling heat exchangers. The welded plate heat exchanger was discussed to select the plate heat exchanger as the one for the thawing water recovery of aquatic products.
Compact heat exchangers – Design and optimization with CFD

Chamil Abeykoon

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118766

IF: 5.2

2020-01-01

International Journal of Heat and Mass Transfer

Abstract:Heat transfer is one of the key aspects of machineries, devices and industrial processes for maintaining their functionality and also for achieving better product quality. Hence, heat exchangers of different types and sizes are used in these applications with the purpose of removing the extra process/device heat to maintain the desirable working temperatures. However, the size of a heat exchanger is a major consideration for any type of process/device as it decides the space requirements (i.e., the size) of the machine/device or the processing plant. At first, this study aims to investigate the design procedure of a heat exchanger theoretically and then its performance will be analyzed and optimized using computational fluid dynamics. For the design purposes, a counter flow heat exchanger was considered and its length was theoretically calculated with the LMTD method while the pressure drop and energy consumption were also calculated with the Kern method. Afterwards, a computational model of the same heat exchanger was implemented with ANSYS and then this model was extended to six different models by altering its key design parameters for the optimization purposes. Eventually, these models were used to analyze the heat transfer behavior, mass flow rates, pressures drops, flow velocities and vortices of shell and tube flows inside the heat exchanger. Theoretical and CFD results showed only a 1.05% difference in terms of the cooling performance of the hot fluid. The axial pressure drops showed positive correlations with both the overall heat transfer coefficient and pumping power demand. Overall, the results of this study confirms that CFD modelling can be promising for design and optimization of heat exchangers and it allows testing of numerous design options without fabricating physical prototypes.

engineering, mechanical,thermodynamics,mechanics
The Effect of Heat Exchanger Design on Heat transfer Rate and Temperature Distribution

Saad S. Alrwashdeh,Handri Ammari,Mazen A. Madanat,Ala’a M. Al-Falahat

DOI: https://doi.org/10.28991/esj-2022-06-01-010

2022-02-01

Emerging Science Journal

Abstract:The heat exchanger (HE) is a device that is used to complete the process of heat transfer between different matters without direct mixing. Therefore, it is of great importance in the transfer of energy and the completion of various energy transition processes. In the processes of HE between different energy systems, many factors influence and play a major and important role in the efficiency of transformation and exchange in forms of energy, such as the length, the material type, the exchange fluid, the surrounding environment, and many other factors. In this work, the effect of the HE length of the parallel and counter flow HEs was investigated based on the use of computer simulation programs. There was a significant impact of the exchange factors, especially the length of the HEs in both the parallel and counter-flow HEs, on the quality and efficiency of the HE and the temperature distribution. The overall evaluation shows that by increasing the length of the HE for both parallel and counter-flow HEs, the heat transfer is increased and the heat distribution becomes more homogeneous, which aids in enhancing the transfer of energy efficiency inside the HEs. Doi: 10.28991/ESJ-2022-06-01-010 Full Text: PDF
Thermal efficiency evaluation for multisection heat exchange equipment in heat power installations

I A Yanvarev

DOI: https://doi.org/10.1088/1742-6596/1546/1/012055

2020-05-01

Journal of Physics: Conference Series

Abstract:Abstract Comprehensive approach to improving heat exchangers for heat recovery and utilization of heat power installations is achieved by applying a step-by-step heat exchange process to be implemented in multi-section heat exchange equipment. Determination of its optimal structural, design and layout parameters can be carried out taking into account various criteria, including the use of the thermal efficiency function. Expressions for the thermal efficiency function of the objects under study are obtained in the form of complex, non-uniform heat exchange systems, on the basis of which the method for evaluating their execution options is developed. Optimal sequences of heat exchange sections, heat load distribution and operating modes for this equipment are determined.
Optimal Design of Crossflow Heat Exchangers

E. Van den Bulck

DOI: https://doi.org/10.1115/1.2910567

1991-05-01

Journal of Heat Transfer

Abstract:The design of plate-fin and tube-fin crossflow heat exchangers is discussed. The transfer surface area of crossflow heat exchangers is used ineffectively because of the nonuniform distribution of the heat transfer across the volume of the exchanger. The optimal distribution of the transfer surface area for maximum heat exchanger effectiveness and constant total surface area is determined. It is found that a Dirac delta distribution of the transfer surface aligned along the diagonal of the crossflow exchanger gives the best performance; equal to that of a counterflow device. Design guidelines for optimal area allocation within crossflow heat exchangers are established. Compared to conventional designs, designs following these guidelines may lead to either a higher exchanger effectiveness for equal pressure drops and surface area, reduced pressure drops for equal exchanger effectiveness, or reduced weight and a near cubic form of the exchanger core for equal pressure drops and effectiveness.
CFD applications in various heat exchangers design: A review

Muhammad Mahmood Aslam Bhutta,Nasir Hayat,Muhammad Hassan Bashir,Ahmer Rais Khan,Kanwar Naveed Ahmad,Sarfaraz Khan

DOI: https://doi.org/10.1016/j.applthermaleng.2011.09.001

IF: 6.4

2012-01-01

Applied Thermal Engineering

Abstract:This literature review focuses on the applications of Computational Fluid Dynamics (CFD) in the field of heat exchangers. It has been found that CFD has been employed for the following areas of study in various types of heat exchangers: fluid flow maldistribution, fouling, pressure drop and thermal analysis in the design and optimization phase. Different turbulence models available in general purpose commercial CFD tools i.e. standard, realizable and RNG k − ε RSM, and SST k − ε in conjunction with velocity-pressure coupling schemes such as SIMPLE, SIMPLEC, PISO and etc. have been adopted to carry out the simulations. The quality of the solutions obtained from these simulations are largely within the acceptable range proving that CFD is an effective tool for predicting the behavior and performance of a wide variety of heat exchangers.

energy & fuels,engineering, mechanical,thermodynamics,mechanics
Heat-Transfer and Flow-Friction Characteristics of Some Compact Heat-Exchanger Surfaces: Part 2—Design Data for Thirteen Surfaces

W. M. Kays,A. L. London

DOI: https://doi.org/10.1115/1.4016921

1950-11-01

Journal of Fluids Engineering

Abstract:Abstract New developments in prime-mover and process equipment have created a greater need for compact heat-transfer surfaces. This paper presents basic heat-transfer and flow-friction design data for thirteen such surfaces which may be described generally as the plate-fin type and finned-flat-tube type. In addition to the use of the conventional nondimensional correlations, the various surfaces are compared on heat-transfer coefficient versus flow-friction-horsepower basis.

engineering, mechanical
The Potential for Development in Heat Exchanger Plants

Geoffrey F. Hewitt

DOI: https://doi.org/10.1080/01457638108939578

IF: 2.3

1981-10-01

Heat Transfer Engineering

Abstract:The potential for the overall optimization of heat exchanger systems for process plants is considered. By using a more systematic approach, considerable savings in energy and capital may be possible. The next section of the paper deals with the scope for improvement of existing heat exchanger designs with particular reference to shell-and-tube heat exchangers and tube-in-plate heat exchangers. In the future, there is likely to be an increasing trend toward modularization and examples cited here are those of the plate exchanger and the heat pipe heat exchanger. Perhaps the most important unsolved problem is that of heat exchanger fouling and this area is discussed next. Costs of fouling in the U.K. are likely to be in the range of £300M to £500M☆ per annum. A number of research tools are becoming available for the study of heat exchange systems and two of these (namely electrochemical analogue techniques and numerical flow modeling) are reviewed in the final section of the paper.

engineering, mechanical,thermodynamics,mechanics
Micro Heat Exchanger: Design, Operation and Economics

Somayeh Sohrabi,Leila Hajshahvaladi,Hamidreza Ahmadzadeh,Seyed Mohammad Amin Ojagh,Farnaz Heidarpoor,Farnaz Dana,Ehsan Sohrabi,Mostafa Keshavarz Moraveji

DOI: https://doi.org/10.1002/ceat.202400084

IF: 2.2148

2024-10-19

Chemical Engineering & Technology

Abstract:In this review paper, a straightforward journey toward a complete understanding of MHX is provided. Recent developments regarding the dependency of heat transfer and pressure drop of MHX to material selection, type, and the geometry of MHX have been addressed. Different aspects of control instrumentations in MHX have been investigated. Finally, the economics of MHXs have been evaluated. Where precision is paramount in managing temperature and fluid dynamics, micro heat exchangers (MHXs) emerge as indispensable tools. This review investigates the significance of MHX technology, offering readers a comprehensive roapmap from conceptualization to market application. We dissect the nuances of material selection, shedding light on cutting‐edge advancements poised to revolutionize MHX efficiency. Furthermore, we explore how the geometry of MHX influences heat transfer dynamics and pressure drop, providing insights into enhancing the overall effectiveness. We delve into the various types of control instrumentation, offering a detailed analysis of their applicability. Beyond the technical prowess, the economic landscape plays a pivotal role in the adoption of MHX technology.

engineering, chemical
Industrial Heat Exchanger: Operation and Maintenance to Minimize Fouling and Corrosion

Teng Kah Hou,Salim Newaz Kazi,Abu Bakar Mahat,Chew Bee Teng,Ahmed Al-Shamma’a,Andy Shaw

DOI: https://doi.org/10.5772/66274

2017-04-26

Abstract:Industrial Heat Exchanger: Operation and Maintenance to Minimize Fouling and Corrosion | InTechOpen, Published on: 2017-04-26. Authors: Teng Kah Hou, Salim Newaz Kazi, Abu Bakar Mahat, et

Selection of Heat Exchangers and Their Components

Heat Exchanger Fundamentals: Analysis and Theory of Design

A Review on Study of Shell and Tube Heat Exchanger

A Review on Design and optimization of shell and tube heat exchanger by varying parameters

Shell and Tube Heat Exchanger

Thermodynamic and hydraulic design characteristics of the fin tube heat exchanger

Review on Factors Affecting Efficiency of Shell and Tube Heat Exchanger

A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks

Design, Fabrication and Performance Evaluation of a Shell and Tube Heat Exchanger for Practical Application

A Review on the Thermal-Hydraulic Performance and Optimization of Compact Heat Exchangers

Heat Exchanger Selection for Thawing Water Recovery of Aquatic Products

Compact heat exchangers – Design and optimization with CFD

The Effect of Heat Exchanger Design on Heat transfer Rate and Temperature Distribution

Thermal efficiency evaluation for multisection heat exchange equipment in heat power installations

Optimal Design of Crossflow Heat Exchangers

CFD applications in various heat exchangers design: A review

Heat-Transfer and Flow-Friction Characteristics of Some Compact Heat-Exchanger Surfaces: Part 2—Design Data for Thirteen Surfaces

The Potential for Development in Heat Exchanger Plants

Micro Heat Exchanger: Design, Operation and Economics

Industrial Heat Exchanger: Operation and Maintenance to Minimize Fouling and Corrosion