Selective Oxidation of Sulfides to Sulfoxides Using 30% Hydrogen Peroxide Catalyzed with a Recoverable Silica‐Based Tungstate Interphase Catalyst.

Babak Karimi,Maryam Ghoreishi‐Nezhad,James H. Clark

DOI: https://doi.org/10.1002/chin.200527095

2005-01-01

ChemInform

Abstract:For Abstract see ChemInform Abstract in Full Text.

What problem does this paper attempt to address?

Selective Oxidation of Sulfides to Sulfoxides/Sulfones by 30% Hydrogen Peroxide

Ying He,Xiaoyun Ma,Hai Feng Ji,Xin Bing Zha,Hongliang Jiang,Ming Lu

DOI: https://doi.org/10.1080/10426507.2011.649501

2012-01-01

Phosphorus Sulfur and Silicon and the Related Elements

Abstract:A selective and efficient procedure for the oxidation of various sulfides with sodium tungstate dihydrate with 30% hydrogen peroxide in the presence of trioctylmethylammonium dihydrogen phosphate, respectively, to the corresponding sulfoxides and sulfones is reported. The oxidation reaction is carried out at -5 to 0 degrees C in the presence of hydroxypropyl-beta-cyclodextrins for sulfoxides or at 50-60 degrees C for sulfones. The mild reaction conditions, easy workup, and good yields of the products are the major advantages of this method.
Selective Oxidation of Sulfide Catalyzed by Peroxotungstate, Immobilized on Ionic Liquid-Modified Silica with Aqueous Hydrogen Peroxide

Shi Xian-Ying,Wei Jun-Fa

DOI: https://doi.org/10.1016/j.molcata.2007.11.002

2008-01-01

Abstract:Two kinds of catalysts of peroxotungstates immobilized on ionic liquid-modified silica have been synthesized and characterized. By comparing with other heterogeneous catalysts, the most characteristic of these heterogeneous catalysts is the catalyst formed from the combination of catalytic active center peroxotungstate with an ionic liquid. Thereinto, ionic liquid-modified supported catalysts provide the hydrophobic environment for organic reactions. We presume that the heterogeneous catalyst would display excellent catalytic ability depending on the additive effect of an ionic liquid and peroxotungstate. Their catalytic properties in oxidation of sulfides to sulfoxides and sulfones were investigated with 30% aqueous hydrogen peroxide at room temperature. These recoverable catalysts both exhibit high catalytic activities in the oxidation reaction of sulfoxides and provide excellent chemselectivities towards sulfur groups with unsaturated double bonds when the aqueous hydrogen peroxide was greatly in excess. The yields of methyl phenyl sulfoxide were still satisfied when the catalyst was reused for a sixth time.
Efficient Oxidation of Sulfides Catalyzed by a Temperature-Responsive Phase Transfer Catalyst [(C18H37)2(CH3)2N]7 PW11O39 with Hydrogen Peroxide

Xiaoling Xue,Wei Zhao,Baochun Ma,Yong Ding

DOI: https://doi.org/10.1016/j.catcom.2012.09.021

IF: 3.51

2012-01-01

Catalysis Communications

Abstract:A temperature-responsive phase transfer catalyst [(C18H37)2(CH3)2N]7PW11O39, could act as an efficient catalyst for selective oxidation of sulfides with 30% aqueous H2O2. Various kinds of sulfides were successfully oxidized to their corresponding sulfones with over 96% yields in a relatively short time and mild conditions. During reaction at 333K, the catalyst dissolved completely and the oxidation was conducted homogeneously. Before and after reaction, the catalyst was insoluble with cooling, so it is easily recovered and reused. The catalyst was characterized by elemental analysis, FT-IR and 31P NMR.
Peroxotungstates Immobilized on Multilayer Ionic Liquid Brushes-Modified Silica As an Efficient and Reusable Catalyst for Selective Oxidation of Sulfides with H2O2

Xianying Shi,Xiaoyan Han,Wenjuan Ma,Junfa Wei,Jing Li,Qiang Zhang,Zhanguo Chen

DOI: https://doi.org/10.1016/j.molcata.2011.03.024

2011-01-01

Abstract:Peroxotungstates held in a series of different supported ionic liquid brush catalysts were synthesized and characterized. Their catalytic performance towards the selective oxidation of sulfides with aqueous hydrogen peroxide was investigated under mild conditions. We found that the catalytic activities of the different catalysts depend on the number of supported ionic liquid layers and N-end-capped alkyl group on the imidazole ring. The highest yield of methyl phenyl sulfoxide was obtained using the BisILs-C8H17-W2 catalyst under optimum conditions. The sulfides were selectively oxidized to sulfoxides in high yields with trace sulfones detected by GC upon using 1.1 equivalents of H2O2. At 2.5 equivalents of H2O2 the sulfones were found to be the main products. It is noteworthy that the catalyst resulted in high chemoselectivity towards sulfur groups with unsaturated double bonds even though excess hydrogen peroxide was used in addition to exhibiting high catalytic activity. There was no apparent loss of catalytic efficiency until the 8th cycle.
Selective Oxidation of Sulfides to Sulfoxides Catalyzed by Ruthenium (III) Meso‐tetraphenylporphyrin Chloride in the Presence of Molecular Oxygen.

Xin Zhou,Hongbing Ji,Cheng Zhao,Jun Xu,Lixia Pei,Lefu Wang

DOI: https://doi.org/10.1002/chin.200752043

2007-01-01

ChemInform

Abstract:ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.
Hydrophilic Phase Transfer Catalyst Based on the Sulfoacid Group and Polyoxometalate for the Selective Oxidation of Sulfides in Water with Hydrogen Peroxide

Wei Zhao,Chunxia Yang,Kecheng Liu,Ying Yang,Tao Chang

DOI: https://doi.org/10.1039/c6nj03218d

IF: 3.3

2017-01-01

New Journal of Chemistry

Abstract:A hybrid catalyst, based on SO3H-fuctionalized quaternary ammonium and polyoxovanadometalate, was synthesized and used for the selective oxidation of sulfides in water at room temperature. The highest turnover numbers (TON) can reach up to 1536. The organic products with high yields can be easily separated and the catalytic system can be used several times with the retention of catalytic activity.
Selective oxidation of H2S to elemental sulfur over chromium oxide catalysts

Jae Hoon Uhm,Moon Young Shin,Jiang Zhidong,Jong Shik Chung

DOI: https://doi.org/10.1016/S0926-3373(99)00057-0

1999-01-01

Abstract:CrOx and CrOx supported on SiO2 have been found to be active for the selective oxidation of hydrogen sulfide to elemental sulfur. The catalysts show maximum sulfur yield at a stoichiometric ratio of O-2/H2S, 0.5. Amorphous Cr2O3 exhibits higher yield of sulfur and has stronger resistance against water than supported Cr/SiO2, especially at low temperatures. At high temperatures above 300 degrees C, the sulfur yield over the supported catalyst becomes similar to amorphous Cr2O3 because the Claus reaction occurring on the silica support removes SO2 to increase the sulfur yield. Active sites are the amorphous monochromate species that can be detected as a strong temperature programmed reduction (TPR) peak at 470 degrees C. Catalytic activity can be correlated with the amount of labile lattice oxygen and the strength of Cr-O bonding. The reaction proceeds via the redox mechanism with participation of lattice oxygen, (C)1999 Elsevier Science B.V. All rights reserved.
Selective Oxidation of Glycosyl Sulfides to Sulfoxides with Sodium Hypochlorite and Catalyzed by Metalloporphyrins

Jian-Ying Huang,Shi-Jun Li,Yan-Guang Wang

DOI: https://doi.org/10.1080/07328303.2010.483041

2010-01-01

ChemInform

Abstract:An efficient and selective method for oxidation of glycosyl sulfides to the corresponding glycosyl sulfoxides with metalloporphyrins as catalysts and sodium hypochlorite as oxidant was achieved under mild conditions. High chemoselectivity and diastereomeric excesses were obtained. Both acid-labile protected groups and carbon-carbon double bonds of allyl groups tolerated under these conditions.
Selective oxidation of sulfides to sulfoxides using hydrogen peroxide over Au/CTN–silica catalyst

fang wang,cheng liu,gui liu,wenxiu li,junhua liu

DOI: https://doi.org/10.1016/j.catcom.2015.09.015

IF: 3.51

2015-01-01

Catalysis Communications

Abstract:Chitosan (CTN) can be used as potential support to create environmentally friendly catalysts; however, chitosan's poor diffusion properties and low surface area limit its application. Direct deposition method on inorganic supports might be a feasible and simple solution, using core (silica nanosphere)–shell (chitosan) material as support, a series of Au/CTN–silica catalysts were prepared by inverse microemulsion system. These catalysts were active in catalyzing the oxidation of sulfides to sulfoxides with relative good conversion and high selectivity. This study confirms that the key factor governing catalytic performance of this catalyst should be the interaction between gold nanoparticles and N atoms.
A peroxotungstate-ionic liquid brush assembly: an efficient and reusable catalyst for selectively oxidizing sulfides with aqueous H2O2 solution in neat water

xianying shi,wenjuan ma,hui ou,xiaoyan han,congmin lu,yan chen,junfa wei

DOI: https://doi.org/10.1590/S0103-50532012005000012

2012-01-01

Journal of the Brazilian Chemical Society

Abstract:An efficient and reusable heterogeneous catalytic assembly of peroxotungstate held in a ionic liquid (IL) brush was synthesized and an environmentally-friendly procedure was developed for selective oxidation of sulfides at room temperature using 30 wt.% hydrogen peroxide as the terminal oxidant and water as a sole solvent. No organic co-solvent or other additive was needed. A 1.5-2.0 mol% (based on W atom) loading catalyst was found to be sufficient for a smooth and clean reaction. Both aliphatic and aromatic sulfides were efficiently and selectively transformed into their respective sulfoxides or sulfones by simply controlling of equivalents of hydrogen peroxide. In addition to the high catalytic activity, the catalyst exhibits excellent chemoselectivity. Sensitive functional groups, such as double bond and hydroxyl, remained under the oxidation conditions the reaction even with an excess hydrogen peroxide. The catalyst was easily recovered (via simple filtration) and reused at least eight times without a noticeable loss of activity.
Selective Oxidation Using In-Situ Generated Hydrogen Peroxide over Titanosilicates

Zhipeng Wan,Hao Xu,Peng Wu

DOI: https://doi.org/10.1016/j.cjsc.2024.100298

IF: 0.847

2024-01-01

Chinese journal of structural chemistry

Abstract:Titanosilicates are a class of heteroatom-containing zeolitic materials with tetrahedrally coordinated Ti4+ions incorporated into crystalline zeolite frameworks,with TS-1,Ti-MWW and Ti-MOR as representative and attractive selective oxidation catalysts.The liquid-phase oxidations of a variety of substrates such as olefins and ketones with the green oxidant of H2O2 over titanosilicates under mild conditions have attracted considerable research interests in the clean production of fine and bulk chemicals,among which propylene epoxidation and cyclohexanone ammoximation have been industrialized[1].
Kinetic and Mechanism of the Aqueous Selective Oxidation of Sulfides to Sulfoxides: Insight into the Cytochrome P450-like Oxidative Metabolic Process

Xian-Tai Zhou,Gang-Qing Ren,Hong-Bing Ji

DOI: https://doi.org/10.1142/s1088424613500776

2013-01-01

Journal of Porphyrins and Phthalocyanines

Abstract:The selective oxidation of sulfides with hydrogen peroxide to give sulfoxides was carried out in aqueous solution by water-soluble manganese porphyrin as mimics of cytochrome P450-like catalyst. Different factors that influencing the selective oxidation of sulfides, for example, catalyst, amount of catalyst, solvent and reaction temperature were investigated. MnTE4PyP (meso-tetrakis(N-ethylpyridinium-4-yl) manganese porphyrin) was efficient and selective catalyst for oxidation of various sulfides. The reaction showed first-order dependence in both [sulfide] and [H2O2], and a fractional order respect to catalyst. Oxygen atom transfer mechanism involves high-valence intermediate was proposed, which was supported by kinetic orders and spectrophotometric evidences.
Recent Progress in the Selective Oxidation of Sulfides with Hydrogen Peroxide

Keyan Liu,Hui Ou,Xianying Shi,Xuefen Dong,Wenjuan Ma,Junfa Wei

DOI: https://doi.org/10.6023/cjoc201310019

2014-01-01

Chinese Journal of Organic Chemistry

Abstract:Sulfoxides and sulfones have broad applications in pharmaceutical agents and pesticide due to their biologically activities and they are important synthetic intermediates in C C bond formation and various molecular rearrangements. The selective oxidation of sulfides is a straightforward and frequently used method to obtain sulfoxides and sulfones. Among various oxidizing agents, hydrogen peroxide as benign oxidant has attracted organic chemists' attention for a long time. This review summarizes the recent and important catalytic systems of metal and nonmetal in this area. The catalytic effect of different catalytic systems is briefly discussed herein.
ChemInform Abstract: Catalyst‐Free Approach for Solvent‐Dependent Selective Oxidation of Organic Sulfides with Oxone.

Bing Yu,An‐Hua Liu,Liang‐Nian He,Bin Li,Zhen‐Feng Diao,Yu‐Nong Li

DOI: https://doi.org/10.1002/chin.201234027

2012-01-01

ChemInform

Abstract:AbstractThe oxidation of sulfides (I) with Oxone in ethanol leads to sulfoxides (II), while the oxidation in water affords sulfones (III) in high yields.
Oxidation of Thioether and Mercaptal to Sulfoxide Catalyzed by Hydrogen Phosphates

Junqi Zhang,Meiqiu Li,Xingwang Wang,Yong Zhang,Jun Jia

DOI: https://doi.org/10.6023/cjoc201505008

2015-01-01

Abstract:Hydrogen phosphates have been explored as organocatalysts for the oxidation of a series of aryl alkyl sulfides and 1,3-dithianes derived from aldehydes with aqueous hydrogen peroxide (H2O2) as the terminal oxidant. The corresponding sulfoxides are obtained in moderate to excellent yield (up to 99%) with excellent diastereoselectivity (up to>99 : 1 dr).
A Recyclable Fluorous Thiourea Organocatalyst for the Chemoselective Oxidation of Sulfides

Yi-Bo Huang,Wen-Bin Yi,Chun Cai

DOI: https://doi.org/10.1016/j.jfluchem.2011.05.026

IF: 2.226

2011-01-01

Journal of Fluorine Chemistry

Abstract:As a kind of organocatalyst, 1-[4-(perfluorooctyl)phenyl]-3-phenylthiourea was employed to the chemoselective oxidation of sulfides in the presence of 30% H2O2. A variety of diaryl, dialkyl, alkyl aryl sulfides could be oxidized to sulfoxide under the mild condition. The catalyst could be easily recovered by fluorous solid-phase extraction for reuse.
A Simple and Environmentally Benign Method for Sulfoxidation of Sulfides with Hydrogen Peroxide

Fenglan Liu,Zaihui Fu,Yachun Liu,Chunli Lu,Youyu Wu,Fang Xie,Zhengpei Ye,Xiaoping Zhou,Dulin Yin

DOI: https://doi.org/10.1021/ie9017572

2010-01-01

Industrial & Engineering Chemistry Research

Abstract:The development of a simple, efficient, and environmentally benign method for the sulfoxidation Of Sulfides with aqueous hydrogen peroxide is of importance for the large-scale industrial production of sulfoxides. This article first discloses that various aryl and alkyl Sulfides, Without help of any catalyst and extra solvent, call be directly oxidized by 30% aqueous hydrogen peroxide to the corresponding sulfoxides with good to excellent yield at 60 degrees C. Furthermore, the present Method has Outstanding advantages, with regard to reaction rate and sulfoxide yield, compared with a series of organic solvents-mediated reactions.
Surfactant-controlled Switchable Oxygenation of Sulfides to Sulfoxides or Sulfones under Visible-light Irradiation

Rongnan Yi,Yan Wu,Junhao Chen,Ting Wu,Jin-Yang Chen

DOI: https://doi.org/10.1039/d4nj01784f

IF: 3.3

2024-06-02

New Journal of Chemistry

Abstract:A visible-light induced selective oxidation of sulfides to sulfoxides or sulfones was reported at ambient temperature in H2O under catalyst-free conditions, using oxygen as green oxidant. The surfactants play a key role in this oxidation, and sulfoxides or sulfones were obtained in high yields respectively promoted by different surfactants.

chemistry, multidisciplinary
Catalyst-free approach for solvent-dependent selective oxidation of organic sulfides with oxone

Bing Yu,Anhua Liu,Liangnian He,Bin Li,Zhenfeng Diao,Yunong Li

DOI: https://doi.org/10.1039/c2gc00027j

IF: 9.8

2012-01-01

Green Chemistry

Abstract:Selective oxidation of sulfides was successfully performed by employing oxone (2KHSO(5)center dot KHSO4 center dot K2SO4) as oxidant without utilization of any catalyst/additive under mild reaction conditions. Notably, the reaction can be controlled by the chosen solvent. When ethanol was used as the solvent, sulfoxides were obtained in excellent yield; the reaction almost exclusively gave the sulfone in water. Furthermore, this protocol worked well for various sulfides to the corresponding sulfoxides in ethanol or sulfones in water.
Modulating Oxygen Vacancies of Fe-doped Ti-based Materials with Ultrathin Nanosheets for Enhancing H2S-to-S Selective Oxidation

Ganchang Lei,Zheng Yao,Jingqi Qu,Jiaxin Chen,Lijuan Shen,Xiaohai Zheng,Shiping Wang,Yanning Cao,Yingying Zhan

DOI: https://doi.org/10.1016/j.cej.2024.150007

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Developing highly efficient catalysts for the transformation of hydrogen sulfide (H2S) pollutants into value-added products is crucial for both fundamental catalytic research and industrial chemistry. Herein, ferrititanate nanosheets (H0.8Ti1.2Fe0.8O4, denoted as NS-HTFO) exfoliated from lepidocrocite-type titanates are employed for the first time to catalyze the conversion of H2S to elemental sulfur. Collective experimental characterizations reveal that the as-designed NS-HTFO catalyst possesses ultrathin 2D structure and a large specific surface area, featuring abundant oxygen vacancies. Compared with its sandwich-like precursor of K0.8Ti1.2Fe0.8O4 (denoted as L-KTFO), the NS-HTFO catalyst displays notably enhanced desulfurization activity, achieving 100 % H2S conversion and over 93 % sulfur selectivity at temperatures ranging from 90 to 270 degrees C. Moreover, no significant decline in sulfur yield is observed over the course of a 100-hour evaluation, showing outstanding breakthrough sulfur capacity up to 4163 mg/gcat. This performance exceeds that of most recently reported catalysts. The possible catalytic mechanism for H2S-to-S selective oxidation over the NS-HTFO catalyst has also been investigated.

Selective Oxidation of Sulfides to Sulfoxides Using 30% Hydrogen Peroxide Catalyzed with a Recoverable Silica‐Based Tungstate Interphase Catalyst.

Selective Oxidation of Sulfides to Sulfoxides/Sulfones by 30% Hydrogen Peroxide

Selective Oxidation of Sulfide Catalyzed by Peroxotungstate, Immobilized on Ionic Liquid-Modified Silica with Aqueous Hydrogen Peroxide

Efficient Oxidation of Sulfides Catalyzed by a Temperature-Responsive Phase Transfer Catalyst [(C18H37)2(CH3)2N]7 PW11O39 with Hydrogen Peroxide

Peroxotungstates Immobilized on Multilayer Ionic Liquid Brushes-Modified Silica As an Efficient and Reusable Catalyst for Selective Oxidation of Sulfides with H2O2

Selective Oxidation of Sulfides to Sulfoxides Catalyzed by Ruthenium (III) Meso‐tetraphenylporphyrin Chloride in the Presence of Molecular Oxygen.

Hydrophilic Phase Transfer Catalyst Based on the Sulfoacid Group and Polyoxometalate for the Selective Oxidation of Sulfides in Water with Hydrogen Peroxide

Selective oxidation of H2S to elemental sulfur over chromium oxide catalysts

Selective Oxidation of Glycosyl Sulfides to Sulfoxides with Sodium Hypochlorite and Catalyzed by Metalloporphyrins

Selective oxidation of sulfides to sulfoxides using hydrogen peroxide over Au/CTN–silica catalyst

A peroxotungstate-ionic liquid brush assembly: an efficient and reusable catalyst for selectively oxidizing sulfides with aqueous H2O2 solution in neat water

Selective Oxidation Using In-Situ Generated Hydrogen Peroxide over Titanosilicates

Kinetic and Mechanism of the Aqueous Selective Oxidation of Sulfides to Sulfoxides: Insight into the Cytochrome P450-like Oxidative Metabolic Process

Recent Progress in the Selective Oxidation of Sulfides with Hydrogen Peroxide

ChemInform Abstract: Catalyst‐Free Approach for Solvent‐Dependent Selective Oxidation of Organic Sulfides with Oxone.

Oxidation of Thioether and Mercaptal to Sulfoxide Catalyzed by Hydrogen Phosphates

A Recyclable Fluorous Thiourea Organocatalyst for the Chemoselective Oxidation of Sulfides

A Simple and Environmentally Benign Method for Sulfoxidation of Sulfides with Hydrogen Peroxide

Surfactant-controlled Switchable Oxygenation of Sulfides to Sulfoxides or Sulfones under Visible-light Irradiation

Catalyst-free approach for solvent-dependent selective oxidation of organic sulfides with oxone

Modulating Oxygen Vacancies of Fe-doped Ti-based Materials with Ultrathin Nanosheets for Enhancing H2S-to-S Selective Oxidation