Abstract:Hip and knee joint replacements are common and largely successful procedures that utilise implants to restore mobility and relieve pain for patients suffering from e.g. osteoarthritis. However, metallic ions and particles released from both the bearing surfaces and non-articulating interfaces, as in modular components, can cause hypersensitivity and local tissue necrosis, while particles originating from a polymer component have been associated with aseptic loosening and osteolysis. Implant coatings have the potential to improve properties compared to both bulk metal and ceramic alternatives. Ceramic coatings have the potential to increase scratch resistance, enhance wettability and reduce wear of the articulating surfaces compared to the metallic substrate, whilst maintaining overall toughness of the implant ensuring a lower risk of catastrophic failure of the device compared to use of a bulk ceramic. Coatings can also act as barriers to inhibit ion release from the underlying material caused by corrosion. This review aims to provide a comprehensive overview of wear-resistant coatings for joint replacements - both those that are in current clinical use as well as those under investigation for future use. While the majority of coatings belong predominantly in the latter group, a few coated implants have been successfully marketed and are available for clinical use in specific applications. Commercially available coatings for implants include titanium nitride (TiN), titanium niobium nitride (TiNbN), oxidized zirconium (OxZr) and zirconium nitride (ZrN) based coatings, whereas current research is focused not only on these, but also on diamond-like-carbon (DLC), silicon nitride (SiN), chromium nitride (CrN) and tantalum-based coatings (TaN and TaO). The coating materials referred to above that are still at the research stage have been shown to be non-cytotoxic and to reduce wear in a laboratory setting. However, the adhesion of implant coatings remains a main area of concern, as poor adhesion can cause delamination and excessive wear. In clinical applications zirconium implant surfaces treated to achieve a zirconium oxide film and TiNbN coated implants have however been proven comparable to traditional cobalt chromium implants with regards to revision numbers. In addition, the chromium ion levels measured in the plasma of patients were lower and allergy symptoms were relieved. Therefore, coated implants could be considered an alternative to uncoated metal implants, in particular for patients with metal hypersensitivity. There have also been unsuccessful introductions to the market, such as DLC coated implants, and therefore this review also attempts to summarize the lessons learnt.

Orthopedic Coating Materials: Considerations and Applications

Surface coating of orthopedic implant to enhance the osseointegration and reduction of bacterial colonization: a review

Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants

Titanium-Based alloys and composites for orthopedic implants Applications: A comprehensive review

Functional Coatings or Films for Hard-Tissue Applications

Antibacterial and Anti-Inflammatory Coating Materials for Orthopedic Implants: A Review

New biomaterials for orthopedic implants

Bioceramic coatings on metallic implants: An overview

Antibacterial coatings on orthopedic implants

An overview of recent advances in designing orthopedic and craniofacial implants

Surface Modification of Orthopedic Implants Based on Titanium Alloys

A Promising Orthopedic Implant Material with Enhanced Osteogenic and Antibacterial Activity: Al2O3-coated Aluminum Alloy

From Clinic to Lab: Advances in Porous Titanium-Based Orthopedic Implant Research

Organic-Inorganic Biocompatible Coatings for Temporary and Permanent Metal Implants

Research progress in titanium alloy in the field of orthopaedic implants

Surface engineering of Orthopedic implants for better clinical adoption

Titanium-Nitride Coating of Orthopaedic Implants: A Review of the Literature

An Improved 2-Aminoimidazole Based Anti-Biofilm Coating for Orthopedic Implants: Activity, Stability, and in vivo Biocompatibility

Biomaterials Synthesis and Characterization Mechanical Compatibility of Sol–gel Annealing with Titanium for Orthopaedic Prostheses

Engineered functional doped hydroxyapatite coating on titanium implants for osseointegration

Recent Advances in Antibacterial Coatings to Combat Orthopedic Implant-Associated Infections