Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

Three Dimensional Printing of Carbon/carbon Composites by Selective Laser Sintering

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology

A novel method for fabricating carbon fibre reinforced silicon carbide composites via 3d printing technology

Carbon Fiber-Thermoplastic Composite 3D Printing Technology and Its Self-Monitoring

Acoustic-assisted DLP 3D Printing Process for Carbon Nanofiber Reinforced Honeycomb Structures

3D Printing Carbon-Carbon Composites With Multilayered Architecture for Enhanced Multifunctional Properties

Thermally assisted extrusion-based 3D printing of continuous carbon fiber-reinforced SiC composites

Mechanical behavior and microstructure of 3D-printed carbon nanotubes-reinforced Cu composite

Direct-write 3D printing of UV-curable composites with continuous carbon fiber

Fabrication of Si3N4–SiC/SiO2 composites using 3D printing and infiltration processing

Microstructures and Mechanical Properties of A Low-Cost Three-Dimensional Needled Carbon/Silicon Carbide Composite

Fabrication of Bamboo-Inspired Continuous Carbon Fiber-Reinforced SiC Composites Via Dual-Material Thermally Assisted Extrusion-Based 3D Printing

Microstructure and mechanical properties of 3D needled carbon fibre reinforced carbon and silicon carbide composites

A Novel Method Based on Selective Laser Sintering for Preparing High-Performance Carbon Fibres/polyamide12/epoxy Ternary Composites

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

Investigation of a 3D Printing Method for Continuous Carbon Fiber-Reinforced Thermosetting Epoxy Composite

3D Printing Technology for Short-continuous Carbon Fiber Synchronous Reinforced Thermoplastic Composites: A Comparison between Towpreg Extrusion and In Situ Impregnation Processes

Embedded 3D printing of UV-curable thermosetting composites with continuous fiber

Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites