Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Q</i> factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

High-Selectivity Multi-Route Bandpass Filtering Crossover Based on Substrate Integrated Pseudo-Circular Cavity

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact cross-coupled circular cavity filters using multilayer substrate integrated waveguide

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Frequency-Flexible High Selectivity Multichannel Filtering Crossover Based on Slow-Wave Substrate Integrated Waveguide

Design of Wide-Stopband and Dual-Band Filtering Crossovers Based on Mixed Substrate Integrated Waveguide Cavities

Dual-band bandpass filter using centrally coupled resonators (CCRs)

3-D Printed Filtering Crossover Using Ellipsoidal Cavities

A Novel Narrowband Filter with Cross-Coupling Used for System-in-package Applications

Substrate Integrated Waveguide Filtering Crossover with High Isolation Insensitive to Bandwidth

A General Method for Implementing Flexible Filter Design Based on Nested Substrate Integrated Waveguide Circular Cavity and Cambered Cavity

Compact Multilayer Substrate Integrated Waveguide Dual-band Filtering Rat-race Coupler Based on Fan-shaped Cavities

High Selectivity Quadruple‐mode Broadband Bandpass Filter with Source‐load Coupling

Synthesis of Multi-Band Bandpass Filters Using Semi-Hidden Multi-Mode Coupling Elements

An mmWave dual-band integrated substrate gap waveguide single cavity filter with frequency selectivity

A Planar Filtering Crossover For Three Intersecting Channels

Collaborative Design of a New Dual-Bandpass 180$^{\circ}$ Hybrid Coupler

Compact Planar Balanced Crossover with Bandpass Response

Compact, Dual‐band, and Hybrid Filter Based on Combline and Substrate Integrated Waveguide Resonators

Compact and Wide Stopband Bandpass Filters Based on Dual-Mode Folded Circular Substrate Integrated Waveguide Cavities

Design of Cross-Coupled Bandpass Filters with Flexible Coupling via Half-Mode Substrate-Integrated Waveguide