Abstract:Modern terminal devices are developing towards multi-functionality and miniaturization. Antenna has become one of the bottlenecks for new generation portable devices since it cannot be easily modularized as the well-established integrated circuit. How to design an antenna covering multiple bands within a limited space is a challenge. Besides, urgent demands in increasing information capacity for modern wireless communication systems motivate the applications of multiple-input-multiple-output (MIMO) technique. For MIMO system, a crucial requirement is that each channel should be independent, which means that the antenna array should have a low correlation. This is a big challenge for antenna designers when a limited space is provided, such as portable terminal devices. In this paper, a compact planar printed antenna is presented for mobile terminals. A new terminally loading method is presented which can be used to wideband monopoles. By loading the well-designed hybrid strips on the back via two shorting pins, an additional middle band is generated. Meanwhile high-frequency band characteristics of the wideband monopole are kept invariantly. The new-type monopole is half surrounded by a long folded strip to achieve diversity patterns. Based on this, the proposed structure efficiently reduces the mutual coupling between two adjacent elements in MIMO system. Based on the measured scattering parameters, a low envelope correlation coefficient below 0.25 is obtained even though the two elements are closely placed with a distance of 3 mm. The presented dual-port antenna is low cost and ease fabrication, occupying a volume of 61 mm × 16 mm × 0.8 mm without any lumped component loaded. The printed planar antenna is designed for mobile terminal applications and it covers three bands with measured Su lower than -6dB, i.e., the low-band (880-960 MHz), the middle-band (1800-2500MHz) and the high-band (3400MHz-5850MHz).

Wideband Antenna Pairs Consisting of E-/M-Coupling Frame Monopoles and M-/E-Coupling Back Cover Patches for Mobile Terminal Applications

Shared-Radiator Wideband Grounded Patch Antenna Pair with Bending Slot for Mobile Terminals

Design of Miniaturized and Wideband Four-Port MIMO Antenna Pair for WiFi

Dual-band 8-element MIMO antenna with short neutral line for 5G mobile handset

Wideband antenna pair and its applications for 5G metal frame mobile phones

Multiband and Wideband Self-Multipath Decoupled Antenna Pairs

Closely Spaced Multi-Band MIMO Antenna for Mobile Terminals

Distributed Mobile Antennas: A Novel Miniaturized Wideband Antenna Strategy to Maximize the Use of the Fragmented Spaces of the Mobile Terminals

Extremely Low-Profile Wideband Patch Antennas Using Electric- and Magnetic-Coupling for 5G Mobile IoT Devices Application

Wideband Decoupling of Integrated Slot Antenna Pairs for 5G Smartphones

Compact multi‐band eight‐element MIMO antenna with decoupled antenna pairs for 5G mobile terminal applications

Wideband Back Cover Microstrip Antenna with Multiple Shorting Vias for Mobile 5G MIMO Applications

Compact Wideband MIMO Antenna System for 5G Metal Frame Mobile Phones

Wideband Decoupled 8-Element MIMO Mobile Phone Antenna for Sub-6GHz 5G NR Bands

Wideband Shared-Radiator Four-Element MIMO Antenna Module for 5G Mobile Terminals

Wideband shared-aperture orthogonal mode antenna pair for MIMO application

Dual-Band Shared-Radiator Patch Antenna Pair with High Isolation for Mobile Terminals

Low-Profile and Miniaturized Dual-Band Microstrip Patch Antenna for 5G Mobile Terminals

Ultra-Wideband Microstrip Patch Antenna with the Profile of 1.6 Mm Covering 3.14~5.51 GHz for 5G Mobile Terminal Applications

A Dual-Band 8-Antenna Array Design for 5G/WiFi 5 Metal-Frame Smartphone Applications

Zero Ground Clearance Dual Antenna Pair for Metal-Cased Fifth-Generation Multiple Input Multiple Output Smartphone