Abstract:In this paper, porous zinc oxide (ZnO) nanosheets were successfully prepared by a simple low-temperature hydrothermal method. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer–Emmett–Teller (BET) tests showed that the synthesized product was ZnO with porous sheet structure. The diameter of porous nanosheets was about 100 nm and the thickness was about 8 nm. As a photocatalyst, the degradation efficiencies of porous ZnO nanosheets for methyl orange (MO), methylene blue (MB) and Rhodamine B (RhB) were 97.5%, 99% and 96.8%, respectively. In addition, the degradation efficiency of ZnO for mixed dyes (Mo, MB and RhB) was satisfactory, reaching 97.7%. The photocatalytic stability of MB was further tested and remained at 99% after 20 cycles. In the experiment, ZnO/FTO (fluorine-doped tin oxide) composites were prepared by using ZnO as the conductive layer. Titanium dioxide (TiO2) was deposited on the surface of ZnO/FTO by electrodeposition, so as to obtain a TiO2/ZnO/FTO composite. By studying the electrochromic properties of this composite, it was found that the TiO2/ZnO/FTO composite shows a large light modulation range (55% at 1000 nm) and excellent cycle stability (96.6% at 200 cycles). The main reason for the excellent electrochromic properties may be the synergistic effect between the porous structure and the polymetallic oxides. This study is helpful to improve the photocatalytic efficiency and cycling stability of metal oxides, improve the transmittance of thin films and provide a new strategy for the preparation of ZnO composite materials with excellent photocatalytic and electrochromic properties.

Retracted Article: A Surfactant-Free Co-Assembly Route to Fabricate 2D TiO2–WO3composite Inverse Opal Films for Photochromic Applications

RETRACTED: A surfactant-free co-assembly route to fabricate 2D TiO2-WO3 composite inverse opal films for photochromic applications (Retracted article. See vol. 39, pg. 9031, 2015)

Enhanced Electrochromic Properties of Donor–acceptor Polymers Via TiO2 Composite

Building Architecture of TiO2 Nanocrystals Embedded in Amorphous WO3 Films with Improved Electrochromic Properties

Highly ordered monolayer/bilayer TiO2 hollow sphere films with widely tunable visible-light reflection and absorption bands.

Fabrication and Photo-Detecting Performance of 2d Zno Inverse Opal Films

Fabrication of Tio2 Inverse Opal Film and Its Application in Chemical Sensor

Improving dispersibility of tungsten oxide particles with organic ligands for photochromic films

Fabrication of TiO2 binary inverse opals without overlayers via the sandwich-vacuum infiltration of precursor

Super‐hydrophilic porous TiO2‐ZnO composite thin films without light irradiation

Synthesis and Characterization of Polythiophene/titanium Dioxide Composites

Synthesis of the Porous ZnO Nanosheets and TiO2/ZnO/FTO Composite Films by a Low-Temperature Hydrothermal Method and Their Applications in Photocatalysis and Electrochromism

Fabrication of anatase titania inverse opal films using polystyrene templates

TiO2/(PEO)8LiClO4 composite polymer electrolytes prepared by in-situ method

Self-assembled Inorganic/organic Composite Superlattice Thin Films with Photochromic Properties

A Poly(3,4-Ethylenedioxythiophene):Poly(styrene Sulfonic Acid)/titanium Oxide Nanocomposite Film Synthesized by Sol–gel Assisted Electropolymerization for Electrochromic Application

Oriented Mesoporous Tio2 Film As Photoanode for Dye-Sensitized Solar Cells

Angle-Independent Structurally Colored PS@TiO2 Film with Excellent Underwater Superoleophobicity in Harsh Environments

Enhanced electrochromic properties of anatase TiO2 for flexible electrochromic device

Preparation of Inverse Opal Titanium Dioxide for Photocatalytic Performance Research

TiO 2 Film Decorated with Highly Dispersed Polyoxometalate Nanoparticles Synthesized by Micelle Directed Method for the Efficiency Enhancement of Dye-Sensitized Solar Cells