Abstract:Logic built-in self-test and scan-based testability design are currently the mainstream solutions for large-scale integrated circuit testing. Phase shifters are widely used in these testing schemes because they can greatly improve the driving ability of test inputs and significantly improve the fault coverage of testing. A phase shifter is composed of an XOR network consisting of a certain number of multi-input XOR gates, and the correlation of the output sequence of the phase shifter has a significant impact on the testing performance. The classic constructing method of phase shifters has problems such as long running time, easy wiring conflicts during the actual synthesis and implementation of final circuits. Therefore, when encountering designs with large scanning units, they often face great difficulties. This article proposes a phase shifter constructing method based on grouping and random fan-in, which controls the register units that each scan chain excitation input depends on as much as possible within a local range, greatly reducing the computational time and wiring difficulty of phase shifter construction. At the same time, a linear feedback shift register bit with random fan-in is introduced to reduce the correlation between the output sequences of adjacent ports of the phase shifter. Using partial IWLS 2005 benchmark circuits and OpenCores test circuits, while ensuring the same test fault coverage for stuck-at faults and transition faults, this method reduces more than 30% running time to construct a phase shifter compared to classical methods. The phase shifter structures constructed for each test circuit are synthesized and implemented on Xilinx’s XC7V690T FPGA. The phase shifter constructed by this method consumes more than 20% less wiring resources than the phase shifter constructed by classical methods.

Realized Ways of Time Division Multiplexer in PLD Design

Complex Programmale Logic Device Applied to Optimized SVPWM Algorithm

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

Implement of Multiple Pulse Position Modulation with CPLD

Exploration of FPGA PLB Architecture Base on LUT and Microgates

Application of PLD in Virtual Oscillator

Design and Synthesis of Programmable Logic Block With Mixed LUT and Macrogate

Design of low-power and high-speed multiplier

A Novel Algorithm for Placement of Mixed Macro Block and Standard Cell Designs

Development and Optimization Design of Digital Logic device based on FPGA

Design Flow and Characterization Methodology for Dual Mode Logic

The Design of the SRAM-Based on Reconfigurable Circuits in PLD

Design of Multiplex Pulse Sequence Signal Detector Based on CPLD

A Fast Method for Constructing Phase Shifters to Reduce Wiring Conflicts

Design, synthesis and evaluation of heterogeneous FPGA with mixed LUTs and macro-gates

A High Performance Programmable Logic Cell for Datapath Application

Low-Power, High-Speed, and Area-Efficient Multiplier Based On the PTL Logic Style

A New Approach to Programmable Logic Array for Single-Clock CMOS

A 20-Gb/s Half-Rate 4:1 Multiplexer with Multiphase Clock Architecture in 40-Nm CMOS Technology

Design and Implementation of an FDP Chip

The Realization of Division and Multichannel Output of High-Frequency Clock Using the FPGA